I made this simple CA glue holder that works great for doing small projects without using a lot of CA.
I took a piece of 1/4" plywood and stuck some foam tape to the bottom for grip and then CA glued one of those tapered washers that you see in the picture to it. I then cut about a 1" square of aluminum foil and press it into the washer forming a small cup to hold a drop or two of CA. I then put a piece of masking tape on each end to keep the foil in place. All you have to do when you are finished is pull the foil off and replace it with a fresh piece.
I hope this may come in handy for some of you looking for an easier way to hold a few a few drops of glue without wasting a bottle cap each time.
The pieces used:
Ready to use:
Mike
“Wisdom is the right use of knowledge. To know is not
to be wise. Many men know a great deal, and are all the greater fools
for it. There is no fool so great a fool as a knowing fool. But to know
how to use knowledge is to have wisdom. " Charles Spurgeon