1/96 Revell Cutty Sark and Constitution Dimensions

Not exact measurements, but both are in the neighborhood of 14 inches.

That is, 14 inches with studding booms.  About 12 inches without.  Hope this helps!

I just measured my Constitution mainmast lower yard and studding booms (placed INSIDE - no sails) and got 15 3/16". I'm almost done. Need braces, cutter, jollyboats, and sailors. I would imagine that the studding booms on the mainmast lower yard if placed on the outside for sails would add another 4" total width +/-. I hope this is helpful.

Mike Stolting 

These are the original dimensions of these boats that come to my attention,without great error

            USS Constituition

 Anchorage length- AL= (LOA + bowsprits + spanker boom) = 97.53 m
LOA = 63.4 m
LWL = 53m
Beam = 13.26m

           Cutty Sark

Anchorage-LA = length (LOA +  bowsprits + spanker boom) = 85.34 m
LOA = 70.5m
LWL = 64.74 m
Beam = 10.97 m

So you can make accounts for any scale

1943Mike

I just measured my Constitution mainmast lower yard and studding booms (placed INSIDE - no sails) and got 15 3/16". I'm almost done. Need braces, cutter, jollyboats, and sailors. I would imagine that the studding booms on the mainmast lower yard if placed on the outside for sails would add another 4" total width +/-. I hope this is helpful.

Mike Stolting 

Yeah, that's better than my measurements.  I was going from memory as it's been awhile since I built them and they've dissappeared to other homes in the meantime.  And, I never used the sails, so my measurements would have been with the booms inside.  sorry :(

CLIPPER CUTTY SARK

Cutty Sark  

Mast and yard( Metric system)