SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

why we build certain brand model being ship armor or anything

4465 views
41 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2009
  • From: hamburg michigan
Posted by fermis on Tuesday, July 11, 2017 4:51 PM

When I first got back into it ('09...and even going back before the "break"), I bought cheap kits to build the stash...mainly because that's all I could afford. I enjoyed the challenges presented with said kits. Having built, and built again, all those old Revellogram kits...I have zero desire to do any more of em. Every now and then, I'll challenge myself with some short run "dog" of a kit, and I enjoy it. I just don't want every single kit to be a "major project" anymore.

  • Member since
    May 2017
  • From: ohio I want to leave
Posted by armor 2.0 on Tuesday, July 11, 2017 4:49 PM

Yes pe is a challenge I myself find scratch building like was done in the day before pe and aftermarket parts were around more of a challenge for me.

  • Member since
    January 2015
  • From: Tumwater, WA.
Posted by M. Brindos on Tuesday, July 11, 2017 4:29 PM

Bish

I like a mix. I enjoy kits that fall together, as well as ones that are a bit of a challenge. I enjoy building OOB, adding after market and scratchbuilding.

I don't agree that PE isn't a challenge. In fact adding PE can often be more challenging than building the kit.

As lng as a kit isn't going to fight me at every turn, i don't mind. And i find it nice after a challenging kit to do a nice simple OOB build that i can just relax with and enjoy.

 

I agree. A nice and easy follow up build is very nice after months spent on the same build. 1/72 Airfix FTW. Lol

- Mike Brindos "Lost Boy"

  • Member since
    January 2015
  • From: Tumwater, WA.
Posted by M. Brindos on Tuesday, July 11, 2017 4:25 PM

Tojo72

I read build logs and try to stay away from problem kits.I don't mind complex kits if they are well engineered,most Dragon kits I have done have been good,Tigers,Panthers,Stugs,III's are good,Meng are complex also but build up well.Tamiya are simpler and excellent.

I don't mind inexpensive well done kits either as long as they aren't junk.

I don't want to slog thru an ill concieved,over engineered,bad fitting kit,wasting my limited hobby time.

 

Have you tried an AFV Club kit yet? Talk about over engineering! But they do turn out some beautifully detailed models. Their instructions are worse than Dragons though! Lol!

- Mike Brindos "Lost Boy"

  • Member since
    January 2015
  • From: Tumwater, WA.
Posted by M. Brindos on Tuesday, July 11, 2017 4:04 PM

ManCityFan

I build what I have in my stash.  All "vintage" WWII aircraft and armor collected when I was much younger.  I have about 30 kits, and that will keep me busy for a while.  All models are challenging at my current skill level.  Stick out tongue

The wallet will probably dictate what I will acquire in the future.  I got 2 Dragon armor kits recently due to a 50% off sale.  I am sure they will be plenty challenging when I get around to building them.

D

 

 

Those Dragon armor kits build up very nice and give you lots of extra pieces for other builds. You'll like those, but always double check the instructions as they like to get it wrong and swap parts numbers a lot. Always have a file of reference pictures to fall back on to avoid those pitfalls. They will save you some frustration in the end.

- Mike Brindos "Lost Boy"

  • Member since
    January 2015
  • From: Tumwater, WA.
Posted by M. Brindos on Tuesday, July 11, 2017 3:59 PM

MrStecks

I'm with Goldhammer.  Since returning to the hobby earlier this year, I've tried to build kits that have a reputation of going together easily.  I've really challenged myself with learning new techniques that I never used as a kid (airbrushing, getting rid of seams, weathering... etc.) so I wanted to keep the actual construction process as easy as possible.  My current build will be my first NMF and is the first time I've used PE parts, so I'm grateful that the fit of the kit (Tamiya 1/48 P-47 Bubbletop) doesn't require a lot of extra work.  (Wish I could say the same for the resin wheels I purchased for it... hahaha)

I'm sure that as I improve my skill sets, I will proceed to more difficult kits.  In fact, I already have a couple of kits in my stash that I purchased knowing that they will be a huge challenge to build.  Probably won't be ready to tackle them until next year.  Smile

Cheers, Mark

 

There's nothing wrong with wanting your builds to assemble easily. They don't have to be difficult to give you any experience lol.

I enjoy the easy ones just as much as anyone else. The new Airfix and Tamiya kits have been a splendid treat lately.  :) Yes

- Mike Brindos "Lost Boy"

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, July 11, 2017 3:47 PM

I like a mix. I enjoy kits that fall together, as well as ones that are a bit of a challenge. I enjoy building OOB, adding after market and scratchbuilding.

I don't agree that PE isn't a challenge. In fact adding PE can often be more challenging than building the kit.

As lng as a kit isn't going to fight me at every turn, i don't mind. And i find it nice after a challenging kit to do a nice simple OOB build that i can just relax with and enjoy.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Tuesday, July 11, 2017 3:28 PM

I read build logs and try to stay away from problem kits.I don't mind complex kits if they are well engineered,most Dragon kits I have done have been good,Tigers,Panthers,Stugs,III's are good,Meng are complex also but build up well.Tamiya are simpler and excellent.

I don't mind inexpensive well done kits either as long as they aren't junk.

I don't want to slog thru an ill concieved,over engineered,bad fitting kit,wasting my limited hobby time.

  • Member since
    May 2017
  • From: Denver, Colorado
Posted by MrStecks on Tuesday, July 11, 2017 3:27 PM

I'm with Goldhammer.  Since returning to the hobby earlier this year, I've tried to build kits that have a reputation of going together easily.  I've really challenged myself with learning new techniques that I never used as a kid (airbrushing, getting rid of seams, weathering... etc.) so I wanted to keep the actual construction process as easy as possible.  My current build will be my first NMF and is the first time I've used PE parts, so I'm grateful that the fit of the kit (Tamiya 1/48 P-47 Bubbletop) doesn't require a lot of extra work.  (Wish I could say the same for the resin wheels I purchased for it... hahaha)

I'm sure that as I improve my skill sets, I will proceed to more difficult kits.  In fact, I already have a couple of kits in my stash that I purchased knowing that they will be a huge challenge to build.  Probably won't be ready to tackle them until next year.  Smile

Cheers, Mark


On the bench:  Revel 1/48 B-25J Mitchell

In the queue: Tamiya 1/48 F4U-1A Corsair

  • Member since
    September 2016
  • From: Albany, New York
Posted by ManCityFan on Tuesday, July 11, 2017 3:17 PM

I build what I have in my stash.  All "vintage" WWII aircraft and armor collected when I was much younger.  I have about 30 kits, and that will keep me busy for a while.  All models are challenging at my current skill level.  Stick out tongue

The wallet will probably dictate what I will acquire in the future.  I got 2 Dragon armor kits recently due to a 50% off sale.  I am sure they will be plenty challenging when I get around to building them.

D

 

Dwayne or Dman or just D.  All comments are welcome on my builds. 

  • Member since
    January 2015
  • From: Tumwater, WA.
Posted by M. Brindos on Tuesday, July 11, 2017 2:17 PM

Mostly I build for nostalgic reasons. I always wanted to build this model, or that model. Just so happens most of them are challenging lol.

Just one more overgrown man-child fulfilling boyhood dreams lol. Yes

- Mike Brindos "Lost Boy"

  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Posted by goldhammer on Tuesday, July 11, 2017 2:17 PM

I'm kind of at the other end.  Novice builder, improving (I Think), but prefer a kit that is well engineered and not too fiddly.  I tend to shy away from anything that would require major alterations, or just build OOB and call it good.  Not that good at scratching or PE either.

  • Member since
    May 2017
  • From: ohio I want to leave
why we build certain brand model being ship armor or anything
Posted by armor 2.0 on Tuesday, July 11, 2017 2:12 PM

I started this because I seen a post about lindberg kits being way outdated which is true when I buy a model I want something that's going to be a challenge to  my skill level .a model that as all the details and comes with pe and basically falls togther . I don't consider a challenge and that's why I build model for the challenge to raise my skill level each time I build something Any other opinions.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.