Thank you all so much for the outstanding feedback.
Thanks for the question Stikpusher.
I made the "Disco Ball" by sanding the Eduards PE piece until all of the silver coating was removed and the brass was revealed completely. Next I polished the brass with a piece of fine sandpaper to give it a high shine look, and sprayed a coat of Model Master Acrylic Clear Red over it. I Let this dry for a day or so. I then cut a piece of clear Mylar film, which was purchased at Hobby Lobby, to fit over the PE piece. Make this a little bigger than the piece to be covered, this will allow you to handle it better. I brushed a coat of future over the PE piece and lay the Mylar over it while it is still wet. Gently press this down and let it set for a while.
After this was dry I used a new #11 blade and scored the recesses between each of the lenses on the disco ball. After this was done I brushed another coat of future over it,and let this dry. Finally I trimmed all excess Mylar, folded the piece to shape, and covered it one more time with future. You may have a lense pop off here or there, if this happens just cut a piece of Mylar to the correct size and reattach it with future.
I hope this answers your question and please feel free to ask more.
Thanks again,
Dave Fassett