F-16C Wisconsin ANG 60th Anniversary WIP 11 March 2010

That looks good!

I have another ??? The 3 Antennas on the back tail in the photos....any ideas on how to make these or are there AMs out there?

On Wisconsin!

Do you mean the three static dischargers on the rudder?  On mine, I simply drilled a tiny hole into the corresponding block on the trailing edge, and plan to use tiny pieces of toothbrush bristles to replicate them.  Don't forget the ones on the trailing edges of the stabs and wings too!

Sorry about the dark photos, but it was difficult to take photos in the hangar that day.

Thats what I was talking about!

Super Nice pics!

Frank,

A couple of paint questions?

What White color, ( Gloss, Flat or Semi Gloss) are the following painted in?

Landing Gear Bays

Struts

Intake

I am going to prime these today after assembly and thought I should get your input now.

Thanks

I didn't get a look at the shine in the intake, as it was covered.  I painted mine a semi-gloss white.  The L/G was pretty shney, but a bit dirty.

I would go gloss with that stuff, and some washes to bring out the details.

Well I got Step 2 done.

Etched, Primed and painted. 

Tomorrow the color etch will go in.

Good Night!

Morning Airmen,

Its been a couple weeks since my last post on this project. Same ole story, family, work, life...blah, blah, blah.

He is what I have completed so far.

The PE is a tedious process therefore another reason progress is slow:

With the hoildays here I should be able to get more done a little faster.

Thanks

Hello Everyone,

It has been a while on this project but I have had some time to make progress.

This PIC shows the F-16C Wisconsin ANG off to the paintshop:

This PIC shows the Underside painted in Light Ghost Gray and the Landing Gear Painted:

I will let this completely dry and tackle the upperside on Wednesday. Until then comments, suggestions, questions welcome.

I am very glad to see this one is still in the works!  I worked quite a bit on mine, and finished the paint, decals, etc before realizing that I just was not happy with the paint.  First time I had ever used Tamiya primer out of the can on the model, and man did it soak up the paint!  I used four times more paint than I usually do, and still it does not look good.

Hi Frank,

I hope to complete this by the end of the month. Lots of things going on in December and January and also the fact I want to take my time with this kit to make sure its right.

I just finsihed and primed the tail.

The only primer I use is the Walmart brand. Its cheap and I have never had issues with it.

More to follow.

Well I had some free time this afternoon and ideal weather condtions so I have completed the the top of the F-16. For a novice I think it turned out well. Sorry the PICS aren't better. One of those things I want to improve in 2010.

Tomorrow I will Gloss Coat so I can start decaling. But I do have a question for F-16 experts. See Below for questions.

               MASKED.

             PAINTED.

            Question 1: Frank / daywalker I know you have been up close to this, or Hawkete / Gerald or anyone with upclose experience....... 

                               What Color should I use for the nose??? I was thinking Tamiya XF-66 Light Grey?

              Question 2:

              Should I use all these decals on this Wisconsin ANG F-16C?

             I also got the Tail Primed using Scalefinishes primer. PROPS to Jameston Kroon @ scalefinishes@gmail.com for the primer and the Dupont BLOCKBUSTER BLUE which goes on next. I e-mailed him what I wanted and he made it to spec.

Until next time and Good Evening!

Looking very good there!  As for your question, I used XF-19 for the lighter gray, XF-54 slightly darkened for the darker gray, and XF-53 Neutral Gray for the radome.  Not sure if that helps, but here is a photo of how those colors look together:

And one of the tail just because it is in 176FS markings.

Hi Frank,

That's looking good. It should go well next to my Anniversary scheme. Have to figure a way to do it.

Will you be using all the Tamiya decals on your F-16?

Some More progress made and a snag:

Navigation lights frames painted Aluminum and lenses green/red. Landing strut with using the Eduard color PE set.

The Canopy Painted, Glossed, Decal-ed, and Flat Coated

The Tail Painted in Blockbuster Blue. Next are the Decals and I MUST TAKE MY TIME!

The fuselage painted...........however I now must decide after looking at the real F-16 that it has "wing walk line".

Do I not put them, do I find a decal sheet that has them, do I mask them and paint on or use pinstripping?

Thanks to Mikeym, HawkeyeHobbies, echolmberg for chiming in with there ideas.

Thanks for looking,

They're not part of the kit decals?

MaxPower,

I thought they were but looking at the two sheets supplied in the Tamiya kit....Not-ta!

I remember seeing a kit a while back, not sure of the manufacture that had them. If I can remember that I'll just buy the kit and cannibalize the decals.

When I get home form work tonight, I'll take a look at my rather large collection of 1/48 F-16 decals for a set of wing walk markings.  If I have some, they're yours.

Oh, and don't worry too much about those tail markings, if anything goes awry with them I can help you out with those too.

Sounds good Frank!

I appreciate the effort!

I took a look at the Two Bobs sheet, and the smaller sheet (the one with the pilot names) has these walkways present.  Do you still have that sheet?

Frank,

I know you may understand this since you are the one who provided me with the information on making a Block 30.

Having 2 Tamiya kits, PE and the Two Bob decals along with other builds..................somehow that small sheet got into the CJ box at the bottom and I never looked there.

All day I was going through my mind what to do. When I got home and saw your reply I went to the hobby room and looked through everything carefully and walla......eureka there it was!

My apologies to all! I am usually very organized!

Unto to the Gloss Coat - 2 mist coats, then the decals!

LOL, no worries!  I have been there, done that.  Glad you have it all sorted out.  If you need anything else, just ask.

Youputz,

Many thanks for the photo's.  While I don't live in WI, I appreciate an excellent photo when I see one.  The pic of the Falcon over Lake.... is currently serving TDY as a background on my iMac.

SWEET!  

Here is the fuselage with the Blockbuster Blue Tail.

Its off to the garage for 2 light coats of Gloss Coat on the fuselage only!

Comments, input welcome.

Well I am done to the home stretch. Putting all the Eduard PE in the "wells" took patience and time but I did it!

Started decaling this AM and should be finished today with the day off.

I still have the "FOD" covers to work on and weapons.

Another question I do have after looking at these photos over and over and over 

                                 Please click on link:

                      http://www.airport-data.com/aircraft/photo/209773.html
 

is right below the canopy...is that painted GREEN???

I hope to have this wrapped up this weekend and will post final photo's.

thanks for looking and comments / questions welcome.

IBuild148

Here is the fuselage with the Blockbuster Blue Tail.

              

Its off to the garage for 2 light coats of Gloss Coat on the fuselage only!

Comments, input welcome.

 

 

 

Is it me or is the radome the same color as the main fuselage? You should try a lighter shade for the radome. Well I don't have any Tamiya F-16's all I have are 1/48 Hasegawa F-16's. Oh and Eduard makes some really nice RBF flags though you will need to manufacture the probe covers for the fuselage and nose probes. And there are covers for all the vents on the aircraft to keep debris out of the vents.

Mikeym,

Thanks for your questions and input. I want to get this right so its folks like you that will make this a success.

The radome is painted in Tamiya Light Gray, XF-66. Having only online information / photo's for reference and 3 of those pics show different shades of colors and the Model Master Acryl "Light Ghost Gray" being to "light" I chose the XF-66.

The upper fuselage is FS36118 Gunship Gray and the lower fuselage is FS36270 Neutral Gray. That's what the TwoBob Reference sheet referenced.

As for the probe covers I am still thinking how I can make those along with the seat cover?

Keep the input coming!

I will post an updat this weekend with the decals inplace.

IBuild148

Mikeym,

Thanks for your questions and input. I want to get this right so its folks like you that will make this a success.

The radome is painted in Tamiya Light Gray, XF-66. Having only online information / photo's for reference and 3 of those pics show different shades of colors and the Model Master Acryl "Light Ghost Gray" being to "light" I chose the XF-66.

The upper fuselage is FS36118 Gunship Gray and the lower fuselage is FS36270 Neutral Gray. That's what the TwoBob Reference sheet referenced.

As for the probe covers I am still thinking how I can make those along with the seat cover?

Keep the input coming!

I will post an updat this weekend with the decals inplace.

 

 

Ok looking at the Hasegawa paint guide for the Hasegawa F-16 FS 36270 is listed as light gray for the fuselage foreward. The color you want for the radome and sensor buldges behind the radome is FS 36320 and is listed as Gray.

I got this from a gentleman at Hill AFB involved with the paint process during business at the base who showed me the REG that from the mid 90`s till present the "Hill" Scheme ( FS36270 and FS36118)  is the Standard for USAF F-16.

As for the radome if you do a search for F-16 radome, or having the privilege in talking with someone first hand like I the light gray would be a close match.