1/32 Hasegawa P-40E Finished

You are all very kind.

Joe

My grandson Ezra can do that and more.  Lol.  No, seriously an amazing feat.  Extremely impressiv.

Your friend, Toshi

Another amazing build Joe. Your detail work is just stunning and great weathering as well.

Yes sir, yes sir...absolutely amazing work!! I really enjoyed reviewing your build and comments. Look forward to your next build.

That's one heck of a fine model!

Either put it in a barrister's bookcase or dust it weekly .

You are all very kind.  Thank you.

Greg my hope is to replace the bulbs soon with a daylight style.  Hopefully that will help with some of the current issues.

Joe

Brilliant work, really.

Been so long since seeing one of your cutaways, I'd forgotten about the technique. Building model planes bothers me because in the end, only the exterior paint job is noticed. Man, do you know how to take care of that problem!!!

BTW, not telling you what to do but taking pictures under flourescent lighting is an exercise in futility, period. I strongly agree with John, either turn them off or move away. Run away, even better. PS, they are not that bad, just a little overexposed. And working with that nice white background, that is a learning curve in itself. Me, I learn it, forget it, screw it up, relearn it, repeat.

Thanks so much for sharing this build with us. It is truly inspiring.

Always love watching your builds come together Joe !

Nice detailing

That's cool Joe.  Lots of detail in there.   The on of the first planes I ever built.  Iconic.

Hi,

Your build turned out great.  Its really offers a fascinating chance to look behind the "skin" of the palne to see some of the stuff that makes the plane what it is. 

PF

Well all good things must come to an end.

This is the finished Hasegawa 1/32 P-40E.  

Let me recap.

-Scratchbuilt interior minus seven kit parts, one resin engine, and one resin seat.

-Scratchbuilt tail wheel assembly.

-Scratchbuilt wing framing.

-Scratchbuilt .50 cals.

-After market decals.

All told way to long to finish.  But I will take it.  

Again the pictures are much too faded but this time I know why.  There are some issues/omissions, glaring to me.  The ones I did not fix are the ones that would require me to tear the build apart and start over.  

Thank you for looking in.  

All comments, critiques, and criticism are encouraged.

Joe

Ok friends a post with two objectives.

First:

I have begun the weathering on the 1/32 Hasegawa P-40E.  Using both a cheap set of oils and Abteilung 502 paints.

I want to give this build a finish that suggests a story of an aircraft that has seen some hard use but is still airworthy.  The aircraft was based out of India and supported flights over the Burma hump.  

Now the second objective is the quality of the pictures.  I have spent quite a bit of time over the last four or five days trying to dial in a better quality picture.  These are the latest in the test.

Please all comments, critiques, and criticism are encouraged.

Joe

That's a real mixture of light sources, Joe.  I have all flourescent bulbs. All 6000 kelvin.  I have a tungsten shop light above my bench but I make sure it is off during photography.  My Pentax K-3II allows me to preset the white balance by taking a sample photo of qa white background and it stores that setting.  I do all my photography in manual mode, generally 4 to 8 second exposures at F32 to F40, ISO 100 to get the least noise possible.

Joe, your white balance is a bit off and the pictures are overexposed, I think.  I took this one into Corel Photopaint and reduced the brightness, and raised the color temperature about 300 kelvin.  Your light may be mixed, not all sources having the same color temperature.  That makes it hard for cameras to set the white balance automatically.

An update on the Hasegawa 1/32 P-40E.  This is a happy but yet unhappy update.

First the happy.  The markings are on.  I have done just a little chipping so far with more subtle weathering to follow.  

Next up will be an oil filter to try to tone down the bright markings.  I will also be working more on the landing gear.

Now the unhappy.  Ok down right disappointing pictures.  Yes disappointing.  

You have seen the pictures I spent around two and a half hours to get.  I was so disgusted I reset the camera back to the default factory settings.  I then made just enough adjustments on the fly to get what you see.  Now the disgusting part.  Here are two photos that were taken just a point and click with my phone.  You will see in the one on the workbench just how the color is in reality.  The other was immediately after taking the last of the earlier pictures.

I am most unhappy with the earlier pictures as they wash out the color a bit and lose the different tones in the paint.  May have to go online to get a crash course in picture taking.  I had come so far and now it is lost again.

All comments, critiques, and criticism are encouraged.

Joe

A quick update on the Hasegawa 1/32 P-40E.

In short the wing is on.  It took a massive six hour battle but it is on.  There was some collateral damage.  Of the damage some I was able to work with, the rest I cannot fix without total tear down.  Not sure I want to go there at the moment.

For now.

Now I can move on.  My real decision is do I place the details in the wing and risk breaking them in the rest of the process or do I move on with decals and smaller parts.  Gonna have to think on that one.

All comments, critiques, and criticism are encouraged.

Joe

Very kind.  Thank you.

Chris that is the way I attacked it but honestly I am less than pleased with the technique.  The side effects from it caused me some headache.

Joe

Looks amazing. You're doing a fabulous job there. Just a thought on the wing root gap thing. I am not particularly knowledgeable on the detail of P40's (yet! Will need an E model in the collection eventually), but I seem to recall there was a fair bit of dihedral on the wings. Your model sat there with the wings not yet attached doesn't seem to have any, though that could be just the angle of the photo's. You could always stick a length of tape from wingtip to wingtip over the top of the fuselage pulled taut to pull them up, which would probably close those wing root gaps quite nicely. Or maybe not. Worth a try though I reckon

Its quite stunning Joe.  

Well my friends another update on the Hasegawa 1/32 P-40E.

This one is all about the wings.

Construction of the framework is done.  The stringers are in.  The ammo box is in.  The wing has been prepped for the armament.  

Next up is adding some color.  

First is a base of Stynelrez Metal Primer.  On that a very uneven almost haphazzard coat of Stynelrez Flat Black.  The true colors start with a patchy coat of Model Master Acrylic Zinc Chromate Yellow.  This coat is to mimic the actual primer coat of WW2 aircraft.  Model Master Enamel Olive Drab is sprayed paying attention to the panel lines but allowing a bit of overspray in areas.  A bit of sun bleaching is added by spraying Olive Drab lightened with Model Master Enamel Flat White.  

Honestly it is how I had hoped.

Next step is the little bits and bobs for the interior of the wing and then to attach the wing to the fuselage.  You can see one of the major issues upcoming, that wing root gap.

All comments, critiques, and criticism are encouraged.

Joe

You are very kind.  Thank you.

Joe

lawdog114

I don't even have words for this awesomeness......simply stunning.

 

You are all very kind.  Thank you.

Joe