1/32 Hasegawa P-40E Finished

Hi,

Your build looks incredible.  As a kid when building models I always wondered what real planes looked like under their skin.  Now looking at your build I finally have an answer

Yes, well, as the other have said, not bad, not bad at all

You are both very kind.  I am humbled.  Thank you.

Joe

Joe,

I'd like to know from which institution of higher learning did you received your summa cumlaude in plastic model kit building?

Just stunning!

(Jeez - the site won't let me split the Latin phrase into its proper three words! I don't get it?)

Sorry..that was my jaw hitting the bench

You are very kind.  I am humbled.

Joe

How about another update on the Hasegawa 1/32 P-40E.

First up here are the last pictures of the interior prior to closing the fuselage.

With that ready I can begin the reconstruction of the wing.  Starting with the framework.  

I did do a bit of work on the wing armament.  Here is my rendition of the M-2 fifty cal.

And not forgetting.  A picture of the fuselage closed.

All comments, critiques, and criticism are encouraged.

Joe

You are both very kind.  Pardon my delay I have been caught up in the log in snafu.

Joe

Your cut-aways and attention to detail are amazing as always.  I for one would never get to that stage,and attempt it, even in 1/24, let alone anything smaller.

Wonderful work as usual Joe

Love to watch your scratch building wips

SMA members are scattered to the winds, it seems...

Will be following

Cheers

You are both very kind.  Thank you.

Joe

Coming along swimingly. Another fabulous job Mate.

fightnjoe

As for the radio equipment I am pleased with how it looks.

Ya think???

Zowie, this is something to watch. Always a treat to watch your WIP's, Joe.

Well folks it has been an interesting week but moving forward.

Here is an update on the Hasegawa 1/32 P-40E.  

This week is all about the radio and the interior.  To prep for that I needed to get some initial paint on the cut side and then while I had the airbrush out I sprayed some on the uncut side.

After that dried for a couple of days on to the radio.

Next up is to continue the interior with more work in the cockpit.  As for the radio equipment I am pleased with how it looks.  

All comments, critiques, and criticism are encouraged.

Joe

Many thanks.

Joe

Hi,

Your build is looking great 

PF

You are very kind.  Thank you.

Joe

Man Joe, you are really mastering the skill of scratchbuilding with Evergreen.  Keep up the good work!

Looking really nice Joe, some stunning work on that.

Well folks time for another update.  

This time with a little color.

Now before I get into that let me set the background a bit.  Trying to avoid the overspray into the sections that have been cut open I plan to get the exterior of at least the cut side painted.  I also need to do this prior to installing some of the bits and pieces.  

So with that in mind here we go.  The over all interior had been painted with Stynlrez Metal primer.  Once dry Model Master Acrylic Zinc Chromate has been sprayed into the area to the rear of the cockpit.  Model Master Interior Green is sprayed into the cockpit area and the engine area is left with the Metal primer.  In the photos you will notice I did begin placing some of the easier detail parts.

Next up is the exterior.  First was a coat of Stynlrez Black Primer.  Over this using the Badger Extreme 105 I spray the same Zinc Chromate.  Now at this point let me tell you that I truly hate Model Master Acrylics.  I have had zero luck getting them to spray decent.  This time was no different.  

I am hoping that by doing this layer and then spraying light coats of the top colors I can give the aircraft a faded look with just a hint of the primer coat underneath.

Now as a bonus for this post I can also show the painted engine.

So with this being to this point now I can concentrate on the exterior and get that out of the way.  I believe I will get it all painted as then I will not have to try to get the same mixtures.

As always all comments, critiques, and criticism are encouraged.

Joe

Thank you Chris.

Joe

Very impressive!

Just a quick update to this point.

Work on the Hasegawa 1/32 P-40E continues with the mocking up of the engine, firewall, and instrument panel.  This is just roughed but the radio equipment will be placed this way in the end.  Much still has to be done.  Wiring, plumbing, and assorted smaller parts need to be fashioned yet.  

For this update however the engine received a bit of detail work.

A bit on the firewall and the rear of the instrument panel.  Much more needs to happen here.  

And finally the mock up.

Moving slowly towards the moment I can spray some color.

All comments, critiques, and criticism are encouraged.

Joe

fightnjoe

You are all very kind.  I am humbled. 

There is a fuel cell as well as some pipping in the wing that will be shown. 

Joe 

Ahhhhhhh......that makes sense. Looking forward to seeing this!

Many thanks for looking in.  The engine comes from Engines and Things.  

Joe

I just recently completed this kit, with those decals. I built "Old Exterminator" ... Albeit not nearly the detail you're going into. The decals come with a lot of carrier film, depending on which you use, but they are very easy to work with. Where did you find the resin engine? I wanted one for mine, but could not locate one. Keep up the good work. I'll be following this one. 

You are all very kind.  I am humbled.

There is a fuel cell as well as some pipping in the wing that will be shown.

Joe

And then I let the voices guide me.