SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Armour in the West GB (Defence of the Reich)

44801 views
658 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Saturday, July 19, 2014 12:43 PM

I like that camo terry, nice job.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Saturday, July 19, 2014 7:43 PM

Very nice work Terry- I too love that muffler!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    April 2013
Posted by SchattenSpartan on Sunday, July 20, 2014 2:02 PM

Camo and muffler are looking very nice, Terry!

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, July 21, 2014 9:20 AM

Looks like she's been though some nasty urban fighting!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    January 2013
Posted by jibber on Monday, July 21, 2014 9:49 AM

Thats my hope, I'm thinking about leaving off a couple skirts and rough em up a bit like most of the photos I'm looking at. These things were really beat up and I'm surprised they even ran but somehow they kept em going.  

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, July 24, 2014 11:46 AM

I think it would be a good idea to leave some skirts off. This is looking like a well battered AFV that's really been through the wars.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Thursday, July 24, 2014 10:39 PM

Wow, love how things are going so far Terry.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    January 2013
Posted by jibber on Friday, July 25, 2014 2:07 PM

  • Member since
    January 2013
Posted by jibber on Friday, July 25, 2014 2:08 PM

I'm not sure whats happening with these pics, I'll figure it out and get them back.

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Friday, July 25, 2014 2:35 PM

WOW, that came out of no where. That's a great looking buld Terry, really nice and beat up.

Its a nice touch with the foliage. Not all German vehicles were decked out in it like my Panther, in fact most just seem to have a little here and there. Nice touch with the cam net as well.

And lots of nice pics of those cotton buds. Big Smile

 

Ok guys, who's next.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    May 2013
  • From: From the Mit, but live in Mason, O high ho
Posted by hogfanfs on Friday, July 25, 2014 2:50 PM

Jibber, looks outstanding! Very nice touch with the net. And in your previous pictures, the exhaust can look real. Great job!

 Bruce

 

 On the bench:  1/48 Eduard MiG-21MF

                        1/35 Takom Merkava Mk.I

 

  • Member since
    January 2013
Posted by jibber on Friday, July 25, 2014 2:53 PM

Sorry about the Qtips, I'm not sure what happened. Bish I've gathered a 40 or so pics of real vehicles and most have either a camo net or a little foliage, so as a vehicle that would've been assigned near Normandy I thought a little of both may work. Overall I'm pleased with the build, I only used half of the Schurzren so I experimented on a couple others by scratching and beating them up but when I put them on the vehicle it seemed to be a little too much so I left these with little damage. My next Brummbar will have a full interior and removable turret.

  • Member since
    January 2013
Posted by jibber on Friday, July 25, 2014 3:08 PM

Just a couple more things I wanted to mention, I like the look of the front tracks over the lower glacis and the multi layered rust on the muffler and exhaust. The chipping went well but I didn't add a significant amount of rust to the vehicle. I did do a thinned pin wash and stippled it in for a light effect and looking back I should have left the hatches open with a commander and gunner figure in the turret and add slightly more stowage. Just thinking out loud here in print.

Bish, my next project will be the Orphaned GB then I'll get to the Firefly to complete the twin builds.

  • Member since
    January 2013
Posted by jibber on Friday, July 25, 2014 3:11 PM

Thanks Bruce, appreciate your input. I think the netting is the most realistic I've found and the exhaust did come out nicely.

  • Member since
    February 2014
  • From: Michigan
Posted by silentbob33 on Friday, July 25, 2014 4:30 PM

Great work Terry, the bucket is a nice touch Wink

On my bench: Academy 1/35 UH-60L Black Hawk

  • Member since
    April 2013
Posted by SchattenSpartan on Friday, July 25, 2014 5:08 PM

Yeah, that bucket is very nice indeed! But now to the important stuff: Your Brummbär is a work of art, Terry! I really like the overall beaten-up look with the foliage and the camo net!

  • Member since
    January 2013
Posted by jibber on Friday, July 25, 2014 6:24 PM

That means a lot, thanks.

  • Member since
    May 2014
Posted by Nomad53 on Friday, July 25, 2014 6:26 PM

Wow Jibber great job. I really like the netting nd how you weathered and chipped the paint.

Doug

Nomad53


 

  • Member since
    January 2013
Posted by jibber on Saturday, July 26, 2014 7:35 AM

Thanks Doug I appreciate the nice comments. Terry

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Saturday, July 26, 2014 7:46 AM

Love what you've done here Terry! The scuffed-up paint and bent and battered skirts make her look like she's been in some heavy street fighting. Kudos sir!!!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    January 2013
Posted by jibber on Saturday, July 26, 2014 8:20 AM

Its nice to hear the comments I tried to make it as realistic as I could. Thanks G.

  • Member since
    May 2014
Posted by Nomad53 on Saturday, July 26, 2014 10:19 AM

Your welcome Terry.

I have tried to do some chipping using the hairspray technique with very poor results. Almost ruined the model. I have several weak points with chipping, pin washes, doing rust among other weathering techniques.

I have read several articles and watched videos on the above subjects and still can't seem to get them down so seeing what you have done is really inspiring for me to strive and master the techniques.

Keep up the great modeling.

Doug

Nomad53


 

  • Member since
    January 2013
Posted by jibber on Saturday, July 26, 2014 10:58 AM

Doug thanks but the chipping isn't that difficult, I think the hardest part is knowing where to do it so it looks realistic. I'm still working on that.  

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Saturday, July 26, 2014 11:52 AM

Jibber - fine work on the Brummbar, you certainly turned up the pace once the historical timeline was figured out.  Everything looks great and in harmony with one another.  Excellent use of the chipping technique, both in your execution and utilization. Yes

regards,

Jack

  • Member since
    January 2013
Posted by jibber on Saturday, July 26, 2014 12:13 PM

Jack thanks for the nice comments, I would've been disappointed if I couldn't have entered it. I thinks its a unique vehicle.  

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Friday, August 1, 2014 3:10 AM

Shameless bump. I know everyone is busy on other builds, but just making sure you guys haven't forgotten and that you know we are still here.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.