SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

B-36 Peacemaker Group Build

173750 views
818 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2007
  • From: Southern New Jersey
Posted by troublemaker66 on Wednesday, April 4, 2012 8:08 PM

Censored

lajntx

 Reasoned:

As I look at this, I really wish they would have had the figures a little more...... dynamic.

 

 

Nah. Just look at those flight engineers doing the Hokie Pokie!

Cool Cool Cool Cool Cool Cool

You put your right arm in..... You take your right arm out....

Great...just great...you had to start singin` the Hokie pokie didn`t ya???  Now I got the Censored song stuck in my head! I just got over a bout of "Hakuna Matada"...now this?  You`re killin` me man...LOL..HeadphonesHeadphonesDeadBig Smile

Len Pytlewski

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Wednesday, April 4, 2012 11:11 PM

Anyone know how much weight I have to stuff in this thing to keep it from tail sitting?

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    May 2009
  • From: Riverton, Wyoming
Posted by Andrew Magoo on Thursday, April 5, 2012 12:50 AM

Hi Reasoned, my first B-36 was a learning experience. I forgot to add weight while the fuselage was accessible. So what I did was glue a one pound lead ingot in the wing spar, I had to cut off two corners. I don’t recommend this. I think I saw in the beginning of this group build post (maybe not) where some one made a mold and then cast a lead weight that fit in the space forward, to the sides of the front wheel well and below the nose deck. I’m pretty sure that is what I’m going to do this time. Magoo

  • Member since
    March 2007
  • From: Carmel, CA
Posted by bondoman on Thursday, April 5, 2012 12:52 AM

2" long 1/2' machine bolt, with four or five nuts on it till they don't fit no more. Don't understand why people get fancy....

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Thursday, April 5, 2012 6:58 AM

bondoman

2" long 1/2' machine bolt, with four or five nuts on it till they don't fit no more. Don't understand why people get fancy....

Now THAT I have in my spare nuts/bolts/screws etc. bucket, thanks.

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    September 2011
  • From: North Texas
Posted by lajntx on Thursday, April 5, 2012 10:38 PM

Speaking of the weight issue. Here`s something so few are aware of.

As you know Convair tried to keep the program alive with the all jet B-60 which ultimately lost out to the B-52. The B-60 had such a bad weight ratio due to the deletion of all aft crew compartments which further increased the likelihood of a  " tail tip " In this photo below you can make out the counter weights that were installed on the craft while it was parked while not in use. On the front landing gear you can see the cylinder weights protruding out from the tires very vaughly

B-36 Peacemaker Builds 

On the Bench: B-36 paint test  fusealge & RB-36E assembly test build

In Que: YB-36 Conversion Build & B-36 carries B-58 Airframe to Wright Patterson

Conceptual Planning: RB-36 X-15 Mothership

  • Member since
    September 2011
  • From: North Texas
Posted by lajntx on Thursday, April 5, 2012 10:53 PM

Got some more news....

As I stated in an earlier post I am starting a new job this Monday 4/9 which will actually allow me time to "build" again. In a strange quirk of fate, today I recieved another offer for another job in the public sector that would begin May 3 which pays twice the salary, and has full benefits. The only downside is that being a state job it only pays once a month meaning I wouldnt get my first check until June 1, and it does require me to relocate for about 2 months for training.

Just a heads up... I`ll be building what I can when the supplies I have already purchased very soon as start my "new job" on monday, but I am going to save most every extra dime I have to get through the month of May while I start my new-new job , thus my building will again slow down as I go through training for the State job in May/June.

The very good upside to this is on the backside after training is the job has a 4 days on, 4 days off work  ( plus the holidays ) cycle so it will probably be mid summer before I start cranking out work in any great detail.

Never in my life have I started a new job going into the first day knowing I will be quitting in 3 weeks. Tongue Tied

B-36 Peacemaker Builds 

On the Bench: B-36 paint test  fusealge & RB-36E assembly test build

In Que: YB-36 Conversion Build & B-36 carries B-58 Airframe to Wright Patterson

Conceptual Planning: RB-36 X-15 Mothership

  • Member since
    May 2009
  • From: Riverton, Wyoming
Posted by Andrew Magoo on Friday, April 6, 2012 1:25 AM

Hi Bondoman, you’re correct and I had to laugh at myself, the kiss philosophy works well. Thanks for straightening me out. Magoo

  • Member since
    September 2011
  • From: North Texas
Posted by lajntx on Friday, April 6, 2012 1:55 AM

Andrew Magoo
Hi Bondoman, you’re correct and I had to laugh at myself, the kiss philosophy works well. Thanks for straightening me out. Magoo

 

Unfortunately, when I pick back up on my B-36/B-58 build I will have to get creative as that FWD lower radome is elminated, and the open full bomber version of the bomb bay would expose anything attached to the backside of the radio room bulkhead

 

 

 

B-36 Peacemaker Builds 

On the Bench: B-36 paint test  fusealge & RB-36E assembly test build

In Que: YB-36 Conversion Build & B-36 carries B-58 Airframe to Wright Patterson

Conceptual Planning: RB-36 X-15 Mothership

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Friday, April 6, 2012 10:13 AM

Well hey! I guess it's congrats to la!Toast  Good luck on your new job.  Now don't go running off until I get this monster put together.Wink  Got the wheels all painted along w/landing gear.  After further dry fitting, the idea of painting the wings and fuselage apart is not such a good idea.  Since the wings seam flush with fuselage, it leaves NO room for error. So..... i'm going to tackle the canopy masking Ick! and affix it to the fuselage (after attempting to fix all seams Indifferent), then try and get the wings to fit properly to the fuselage..... and clean them up too.Sad

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    September 2011
  • From: North Texas
Posted by lajntx on Friday, April 6, 2012 11:16 PM

I`ll still be around... Ive got 3 weeks to do a little work before I go off for training. I`ll still have computer acess, but wont be at home to do anything for most of that 2 months. In other news today, my 1/72 X-15 came in today for my B-36 Mothership build ( whenever I get around to that )... When all is said and done I`ll have 3 "carrier" builds.... B-58 transfer, FICON, and X-15 Mothership

B-36 Peacemaker Builds 

On the Bench: B-36 paint test  fusealge & RB-36E assembly test build

In Que: YB-36 Conversion Build & B-36 carries B-58 Airframe to Wright Patterson

Conceptual Planning: RB-36 X-15 Mothership

  • Member since
    May 2009
  • From: Riverton, Wyoming
Posted by Andrew Magoo on Saturday, April 7, 2012 5:11 PM

Hi, lajntx, apparently I’m a dullard and can’t get photobucket to upload anything from my computer. I opened an account, labeled an album, and when I go and click on the upload button nothing happens. I’ve tried this several times and even went to their help page. Any ideas? Magoo

  • Member since
    September 2011
  • From: North Texas
Posted by lajntx on Saturday, April 7, 2012 10:21 PM

Other than making sure you are trying to upload to the correct album, I really wouldnt know.  Just keep trying, if all else fails find a young whipper snapper in your family to show you as kids these days are born knowing how to use computers. Cool

B-36 Peacemaker Builds 

On the Bench: B-36 paint test  fusealge & RB-36E assembly test build

In Que: YB-36 Conversion Build & B-36 carries B-58 Airframe to Wright Patterson

Conceptual Planning: RB-36 X-15 Mothership

  • Member since
    March 2007
  • From: Carmel, CA
Posted by bondoman on Sunday, April 8, 2012 12:29 AM

lajntx

Speaking of the weight issue. Here`s something so few are aware of.

As you know Convair tried to keep the program alive with the all jet B-60 which ultimately lost out to the B-52. The B-60 had such a bad weight ratio due to the deletion of all aft crew compartments which further increased the likelihood of a  " tail tip " In this photo below you can make out the counter weights that were installed on the craft while it was parked while not in use. On the front landing gear you can see the cylinder weights protruding out from the tires very vaughly

probably the real issue was that the  -52 was 100 mph faster at 40,000 feet.

Loosing weight aft didn't make it a tail dragger,but the swept wings sure did. The -60 had a retractable tail wheel on a long leg, but it could not take a big downward load after rotation and was more of a landing aid.

Here's a ??? For you 36 fans, that I don't know the answer to. Once a while ago I read a piece about one time use airfields in New England and Canada for the big attack. Must have been pre Internet as I cannot find that info now.Any ideas?

  • Member since
    September 2011
  • From: North Texas
Posted by lajntx on Sunday, April 8, 2012 9:41 AM

bondoman

Here's a ??? For you 36 fans, that I don't know the answer to. Once a while ago I read a piece about one time use airfields in New England and Canada for the big attack. Must have been pre Internet as I cannot find that info now.Any ideas?

I`m not aware of anything that was cold war era. I always thought that the runs to Alaska & Greenland to refuel and back was meant to demonstrate to the Soviets that the bombers could just as easily turn towards the USSR to hit targets and return to Alaska/Greenland before returning to their homebase

Now I have read this, but it was WWII strategy should the 36 be brought into production:

They would be based from Virginia to New England - Fly to Newfoundland for refueling & spark plug changing....fly east & bomb Europe and return back the same route with Iceland being an emergency landing place.

If you want I can pose the question to a few of the authors of some of the B-36 books out there?

B-36 Peacemaker Builds 

On the Bench: B-36 paint test  fusealge & RB-36E assembly test build

In Que: YB-36 Conversion Build & B-36 carries B-58 Airframe to Wright Patterson

Conceptual Planning: RB-36 X-15 Mothership

  • Member since
    March 2007
  • From: Carmel, CA
Posted by bondoman on Sunday, April 8, 2012 2:31 PM

lajntx

Speaking of the weight issue. Here`s something so few are aware of.

As you know Convair tried to keep the program alive with the all jet B-60 which ultimately lost out to the B-52. The B-60 had such a bad weight ratio due to the deletion of all aft crew compartments which further increased the likelihood of a  " tail tip " In this photo below you can make out the counter weights that were installed on the craft while it was parked while not in use. On the front landing gear you can see the cylinder weights protruding out from the tires very vaughly

probably the real issue was that the  -52 was 100 mph faster at 40,000 feet.

Loosing weight aft didn't make it a tail dragger,but the swept wings sure did. The -60 had a retractable tail wheel on a long leg, but it could not take a big downward load after rotation and was more of a landing aid.

Here's a ??? For you 36 fans, that I don't know the answer to. Once a while ago I read a piece about one time use airfields in New England and Canada for the big attack. Must have been pre Internet as I cannot find that info now.Any ideas?

  • Member since
    May 2009
  • From: Riverton, Wyoming
Posted by Andrew Magoo on Sunday, April 8, 2012 6:55 PM

Howdy Ya'll, I have decided to build the YB-60 first. I wanred to send you pictures of the sacrificial RB-36 and the conversion kit. I'm taking pictures and when I figure out what I'm doing wrong on Photobucket I'll post pictures. Magoo

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Sunday, April 8, 2012 9:47 PM

Okay, I've stuck four big sinker weights (from my tackle boxHuh?) on a big ole washer, then glued it to the bulkhead aft of the cockpit.  That should hopefully keep her off the tail.  Going to close her up tomorrow and start working on all those seams............. woo hoo Tongue Tied

EDIT: yippie, the Alclad Alumn is in!

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Monday, April 9, 2012 10:29 PM

Oh my flippin goodness! The seams on this thing, why didn''t anybody warn me???? Bang Head

They don't match and they go in and out and wave around arrgh!  I bet I have a dozen tape strips plus a vise on this bird, it's going to take a week of filling and sanding. Ick!

Okay, done whining.

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    May 2009
  • From: Riverton, Wyoming
Posted by Andrew Magoo on Monday, April 9, 2012 11:59 PM

Hi Reasoned, don't loose hope, the harder you work on something the more pride you take in your work when done. I agree that you would think it shouldn't have such a bad fit but when you see how model molds are made I'm amazed that anything fits as well as it does. Magoo

  • Member since
    March 2007
  • From: Carmel, CA
Posted by bondoman on Tuesday, April 10, 2012 12:22 AM

Everything about that model requires endurance. Why I would never build it again. Somewhere out there John Eaton is making wing roots...

BTW the RB-36 had only one flight engineer...

 

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Tuesday, April 10, 2012 6:29 AM

bondoman

Everything about that model requires endurance. Why I would never build it again. Somewhere out there John Eaton is making wing roots...

BTW the RB-36 had only one flight engineer...

 

Surprise Well, funny thing is in all the contortion of seaming this thing, one of the FE's fell out. Smile  Sves me gluing him back in, thanks.

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    April 2008
  • From: Kristiansund, Norway
Posted by Huxy on Tuesday, April 10, 2012 11:29 AM

A B-36 GB!? Hahahaha!!

 

I was seconds away from buying this very kit a few weeks ago at the IPMS!

I ended up buying a 1/72 B-737-500.. hehe

 

Well, not for me. Hope ya'll enjoy it!

"Every War Starts And Ends With An Invasion".

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Tuesday, April 10, 2012 11:32 AM

You have NO idea the fun you're missing! Tongue Tied

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Monday, April 16, 2012 10:42 AM

"bump" Hope to post some pics tonight of the current progress (or lack thereof).  The ENTIRE seam along the fuselage has been treated with a technique from Swanny's site, not sure I did it correct but.... 

On another note, if you should decide to get an inch to build a B-36............... go to the Dr. instead.Wink

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Monday, April 16, 2012 9:37 PM

Here's pics as promised before I begin sandingSmile........ and sandingIndifferent........... and sandingSleep.  I'm trying Swanny's tip for seams.  Since there were large gaps or uneaven seams which I used a flat blade and sliced down to a "scarred" flatter seam.

 

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    September 2011
  • From: North Texas
Posted by lajntx on Monday, April 16, 2012 9:58 PM

Congrats, when you get done with the 36, You will be ready to graduate to some of the harder 1/72 cold war bomber models  Stick out tongue

I`ve started the job with the state that is requiring me to travel for training the next couple of months, so I`ll be limited in what I can do on mine.

In case you were wondering what those "Harder" cold war bombers are:

TU-95 Bear in 1/72

http://www.youtube.com/watch?v=84vkdWeFCdQ&feature=related

 

And the most obnoxious one to build that requires nerves of steel:

Hasegawa 1/72 B-47E Stratojet

http://modelingmadness.com/reviews/korean/us/kol47.htm

 

 

B-36 Peacemaker Builds 

On the Bench: B-36 paint test  fusealge & RB-36E assembly test build

In Que: YB-36 Conversion Build & B-36 carries B-58 Airframe to Wright Patterson

Conceptual Planning: RB-36 X-15 Mothership

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Monday, April 16, 2012 11:33 PM

Thanks but I think once this bird is done, I'm done with bombers for a while and except for this one, I build only WWII stuff.  Think a steady supply of Tamiya "shake and bakes"Hmm...... after my Revell 109G that is. Wink

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    March 2007
  • From: Carmel, CA
Posted by bondoman on Tuesday, April 17, 2012 2:17 AM

Reasonable!

Hasegawa B-47 is the only other one, and that's a legacy type model.

Seams, meh, they're good on that one because it means you found the right two parts.

Academy B-50 is good.

 

  • Member since
    July 2007
  • From: Southern New Jersey
Posted by troublemaker66 on Tuesday, April 17, 2012 5:00 AM

Reasoned

Thanks but I think once this bird is done, I'm done with bombers for a while and except for this one, I build only WWII stuff.  Think a steady supply of Tamiya "shake and bakes"Hmm...... after my Revell 109G that is. Wink

You can count that Revell 109 as one of your "Shake-n-Bakes"...built one for the Monogram Mafia II GB and it`s a nice little kit...mine was the "new" boxing, looks like the same old molds tho`.

Len

Len Pytlewski

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.