SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

The Official 1943 70th Anniversary Group Build

89077 views
650 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Wednesday, January 23, 2013 10:07 PM

Nice results, Eric.  Weathering turned out very well.  It makes for an interesting subject that draws attention.

 

 

 

 

  • Member since
    October 2008
  • From: Georgia
Posted by Rigidrider on Thursday, January 24, 2013 5:40 PM

EB...

That is one COOL looking truck! Bravo! Excellent build, Hope you'll be doing more here, would love to see it!

When Life Hands You A Bucket Of Lemons...

Make Lemonade!

Then Sell It Back At $2 Bucks A Glass...

  • Member since
    October 2009
  • From: Oil City, PA
Posted by greentracker98 on Thursday, January 24, 2013 11:15 PM

Well we've had a1942 GB and here we have the 1943 GB. So on this note, I "think" I know what I'm going to do for the 1944 GB. LOL

A.K.A. Ken                Making Modeling Great Again

G-J
  • Member since
    July 2012
Posted by G-J on Friday, January 25, 2013 5:43 PM

I'd like to join, though I'm finishing up a model for a different build.

I'm planning on a P-40F with the 87th Fighter Squadron, based out of Tunisia.  The 87th was used in the invasion of Sicily, part of Operation Husky.

As soon as I finish my other model, I'll get started.  One of my issues is finding a P-40F...I see Squadron has one, but they are out of stock.  Still looking.

On the bench:  Tamyia Mosquito Mk. VI for the '44 group build.  Yes, still.

On deck: 

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Friday, January 25, 2013 6:42 PM

Ebay...You're looking for the AmTech/Hobbycraft kit?

 

 

G-J
  • Member since
    July 2012
Posted by G-J on Friday, January 25, 2013 6:59 PM

That's the only P-40F I've found in the 87th FS

On the bench:  Tamyia Mosquito Mk. VI for the '44 group build.  Yes, still.

On deck: 

  • Member since
    February 2010
  • From: Berkeley CA/St. Paul MN
Posted by EBergerud on Friday, January 25, 2013 9:03 PM

There doesn't appear to be a P40 F or L available in regular channels. Performance increases due to Merlin were nothing those seen in the P-51 and the variation was not considered a success. But they were in the MTO. Reminds me that I have a lovely looking Hasegawa Macchi 202 in the stash. That would be a proper 1943 plane.

 

A model boat is much cheaper than a real one and won't sink with you in it.

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Friday, January 25, 2013 11:24 PM

Its the only merlin P-40 around in 1/48 I think. But aftermarket decals are all over the place for all p-40s.

 

 

G-J
  • Member since
    July 2012
Posted by G-J on Saturday, January 26, 2013 3:59 PM

Thanks for the information.

I'll start watching for it.  Put me down for a P-40F for the group build.  

(Fortunately, I still have to finish a build.)

On the bench:  Tamyia Mosquito Mk. VI for the '44 group build.  Yes, still.

On deck: 

  • Member since
    October 2009
  • From: Oil City, PA
Posted by greentracker98 on Monday, January 28, 2013 12:55 AM

Hooray!!! I get my P-47 the first of the month. So, I'll be able to get started on it next week.Geeked

My LHS has been holding it for me for over 2 months now Big Smile

A.K.A. Ken                Making Modeling Great Again

  • Member since
    October 2008
  • From: Georgia
Posted by Rigidrider on Tuesday, January 29, 2013 6:21 PM

Got to do a little on the Ju87 "G" tonight... More to follow...

Doug

When Life Hands You A Bucket Of Lemons...

Make Lemonade!

Then Sell It Back At $2 Bucks A Glass...

  • Member since
    October 2010
  • From: Hoodsport, WA
Posted by Dogfish_7 on Wednesday, January 30, 2013 11:13 AM

Would the P-40E fit into the 43 Build?

Bruce

  • Member since
    February 2010
  • From: Berkeley CA/St. Paul MN
Posted by EBergerud on Wednesday, January 30, 2013 7:09 PM

I can't imagine that anyone was throwing P-40Es away. They were flown in China and by both American and Australian pilots in New Guinea in 1942. But it is true that the Merlin engined models and the P-40N would have been considerably more common a year later.

 

A model boat is much cheaper than a real one and won't sink with you in it.

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Thursday, January 31, 2013 3:29 AM

No doubt, the E version was still to be found on frontline service as well as training units.   Problem will be finding the correct markings that fit the year.  Doing an image search for 1943 P-40E you will find quite a variety of choices, I even found one for a Russian fighter based in Leningrad. 

The Revell boxing that has been posted is of Flying Tiger ace Robert L. Scott.  He returned to the States in January 1943.  I don't know if he was still flying this same aircraft in January - your turn to do some research Stick out tongue

Most common decal I found was for the Aleutians during the spring of 1943 ... the one with the huge yellow tiger head on the cowl.

regards,

Jack

  • Member since
    October 2010
  • From: Hoodsport, WA
Posted by Dogfish_7 on Thursday, January 31, 2013 7:07 AM

Looks like they're out of stock. Oh well.

Bruce

  • Member since
    February 2010
  • From: Berkeley CA/St. Paul MN
Posted by EBergerud on Thursday, January 31, 2013 2:14 PM

There are good choices for P-40s. Hasegawa does make a 1/32 scale P-40E: not cheap but a better kit than the Revell. Hasegawa also makes a P-40L and P-40N in 1/48 - no doubt both fine kits because Hasegawa doesn't make many bad ones but not bargains. Italeri reboxed the well regarded AMT 1/48 version of the P-40N. Solid kit with a good variety of new decals for about $20. (The decals are needed because so many countries flew the plane.)

If you're looking for a sweet 1943 era plane, it would be hard to miss with Tamiya's F4U-1A Corsair. It was one of those late 90s Tamiya products that are of very high quality and sells for not much more than $20. As far as history goes, it was the mount of the fierce USN and Marine land based fighter squadrons up to their nose in combat in the drive toward Rabaul: Jolly Rogers, Black Sheep etc. These were the gents that killed off a very high % of Japan's veteran pilots in 43, paving the way for the aerial muggings delivered by the Hellcats in 1944.  It was really the Corsair's moment in the spotlight during WWII. The Navy put the more docile and "junior birdman" friendly  Hellcats on the carriers (really a 1944 plane) so once Rabaul was bypassed the Corsairs didn't have much to do until 1945 when the USN decided that a very fast fighter would be useful against Kamikazes and put some on CVs. (The Brits were delighted to get Corsairs and they were widely deployed on RN CVs.) Once in the air the Corsair was a much better aircraft than the Hellcat which is why after the war Corsairs steadily replaced Hellcats as carrier based strike planes and were heavily engaged in Korea. Anyway, a very distinguished aircraft and a very sweet model.

Get something into the GB regardless.

Eric

 

A model boat is much cheaper than a real one and won't sink with you in it.

  • Member since
    September 2009
  • From: Guam
Posted by sub revolution on Saturday, February 2, 2013 4:08 AM

Ebergurud- Just stunning! I love how you took something so common, yet rarely done, and made such a great example! And the explanation was great too!

Welcome aboard, G_J and Dogfish_7! May I humbly suggest a P-40 in Soviet markings...?

RigidRider-Some more excellent detail work! Can't wait to see the two Stukas together.

NEW SIG

  • Member since
    October 2008
  • From: Georgia
Posted by Rigidrider on Saturday, February 2, 2013 7:37 AM

Well I was able to get a bit more done last night before my wife got home, The 37mm cannons are together, A set of brass barrels wound have been nice, But I used the kit barrels and just hollowed out the flash cones and a bit of the barrel, looks loads better now. I've always had trouble getting a nice gun barrel color, until I found some metalizing paints in my LHS, After playing with them a bit I found by first putting on a coat of steel or stainless then over coating with the gun metel metalizer paint, let dry then buff down with a Q tip, it renders a pretty convincing gun color. Got the base coats of MM RLM 76 and MM RLM74 on. It came out a bit dry and rough for some reason, but thats OK, nothing a light buffing wont cure. Time to cure out now, Decals next!

Doug

When Life Hands You A Bucket Of Lemons...

Make Lemonade!

Then Sell It Back At $2 Bucks A Glass...

  • Member since
    December 2009
Posted by ww2psycho on Saturday, February 2, 2013 8:46 AM

I totally forgot I was a part of this GB. Good thing there isn't a lot done on the tiger yet. I'll get pics soon.

  • Member since
    October 2010
  • From: Hoodsport, WA
Posted by Dogfish_7 on Tuesday, February 5, 2013 4:37 PM

Here's a 1943 British version, but doesn't give a Suffix.

en.wikipedia.org/.../File:TR_000978_kittyhawk.jpg

This would fit in to a 1:48 Revell/ Monogram P-40B Tiger Shark kit I have:)

Bruce

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, February 5, 2013 5:08 PM

Doug, more Stuka's, MMMMMMM. heaven.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    October 2008
  • From: Georgia
Posted by Rigidrider on Wednesday, February 6, 2013 4:42 AM

LOLOLOL... Glad you like!

Doug

When Life Hands You A Bucket Of Lemons...

Make Lemonade!

Then Sell It Back At $2 Bucks A Glass...

  • Member since
    February 2010
  • From: Berkeley CA/St. Paul MN
Posted by EBergerud on Thursday, February 7, 2013 1:51 AM

Going through the Squadron catalog and saw the HobbyCraft P-40F/L listed. It's originally an ERTL kit: I have the N model and it looks very good. Anyway, as of today it is in stock on Squadron's web site for $27. All decals are Pacific or US allied.

Eric

 

A model boat is much cheaper than a real one and won't sink with you in it.

  • Member since
    October 2008
  • From: Georgia
Posted by Rigidrider on Friday, February 8, 2013 8:36 PM

Getting her ready for decals...

I usually use a combination of dry rub on transfers and regular decals, Next I'll begin the weathering and detailing the 37s. Hope to have that mostly done bt the end of the weekend.

Doug

When Life Hands You A Bucket Of Lemons...

Make Lemonade!

Then Sell It Back At $2 Bucks A Glass...

  • Member since
    October 2009
  • From: Oil City, PA
Posted by greentracker98 on Saturday, February 9, 2013 3:52 PM

Okay Finally got going on my Jug

A.K.A. Ken                Making Modeling Great Again

G-J
  • Member since
    July 2012
Posted by G-J on Wednesday, February 13, 2013 8:34 PM

Thanks to all the suggestions...I found an AMT P-40F on eBay, and it should be on its way.

As soon as I finish up the Hellcat on the bench, I'll start the P-40 and post some pictures and history of my choice.

On the bench:  Tamyia Mosquito Mk. VI for the '44 group build.  Yes, still.

On deck: 

  • Member since
    October 2008
  • From: Georgia
Posted by Rigidrider on Thursday, February 14, 2013 4:50 AM

 

Ok the "G" is done... Now I have to start the Dio to mount them to.

Doug

When Life Hands You A Bucket Of Lemons...

Make Lemonade!

Then Sell It Back At $2 Bucks A Glass...

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, February 14, 2013 6:03 PM

Doug, nice work on the G-2. Thats an interesting set of markings, were those suggested by the kit.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Thursday, February 14, 2013 7:28 PM

Nice work Doug. Love the look of those cannon barrels.

 

 

  • Member since
    October 2009
  • From: Oil City, PA
Posted by greentracker98 on Thursday, February 14, 2013 8:47 PM

Rigid - That's one heck of set of cannons on that G-2. Looks great I'll try to stay out of your way in my Jug. LOL

A.K.A. Ken                Making Modeling Great Again

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.