MacLinus

Could you reply to me if there is no picture?

Sorry budy, for some reason I missed this and I do not see a picture. What is the scale and manufacturer of the RB-66B?

Nice work on that Peeshooter, Jack. Doing all that detail in 1/72 is amazing, I can't do it that small. Honestly, having that cowling off makes the shooter look better, IMPO. Pimp that engine out and show it to the world.

BK

Thnaks jack, and ye, i agree, i like the rotors like that.

Nice work on the pit and your doing a great job on the engine. I think you would be hard pressed to thin the cover enough to close that gap. Was the resin one dsigned for that kit.

Bish, great job on the Osprey   It really has unique look with the engines tilted like that.

--------------------------

The Peashooter build has become a lot more entailed than I had thought it would be.  The Brengun PE set certainly brings  more detail into the cockpit:

I switched over to the engine next, and that's where the 'fun' really begins.  You might see that the kit provided one (on the left) is smaller than the resin replacement on the right.  Test fitting of the two part cowl shows  good 4mm gap results:

I might be able to carve out the insides with a dremel for a better fit, but right now I'm considering leaving the engine uncovered.  So that means adding some extra detail.

Should add a disclaimer here right now, that I'm not familiar with the Pratt & Whitney R-1340 Wasp engine.  Just going by what I've seen in photos, so if anyone spots an error on my part, I'd rather know about it now during the constructuion phase.  Still need to add ignition wires to the front, but not sure if they are also found on the rear??

The instructions also have you glue the individual exhaust centrally in the rear of each cylinder, but I was seeing differently in photos.

The wing, as stated in reviews, is a single piece with the dyhedral automatically set - the hobbyist just needs to attach them square to the fuselage.  This though, requires some sanding and test fitting to get them to fit.  As the photos show, some gaps need to be filled along the seams.

regards,

Jack

Good afternoon,

here is hopeully a picture of the RB-66B Destroyer for the GB.

Could you reply to me if there is no picture?

Thank you 

MacLinus 

scottrc

 

Bish

 

 

modelcrazy

That's intresting that you have to cut out waistgunner openings. I guess the positions moved from one model to another.
As far as the ball, personally I would hand paint it. I seem to mess things up worse when I mask.

 

 

 

 

Steve, on most B-17, the waiste gun positions were directly opposite each other. this caused a probleml as the gunners would get in each others way. Part way through the 17G production, the right side position was moved so they were staggered. The Academy 17F and G share the same fuselage. So they block off both positions on the right and have you cut out the one you need. I rather like that idea rather than being fixed with what you get as in the Revell 17G.

 

 

 

 

Bish, so far, I really like the kit.  The instructions are so simple and the kit is well thought out.  Fit is really good.  The sprue gates are really thick though and care must be taken to cut the parts off the tree.

But oh oh Scooby Doo, I thought I may have cut the wrong opening, but nope, I cut the one directly in line from the opening on the other side.

I still have my old Hasaqawa G model I built some 30 years ago to reference any differences.  So hopefully I will not get any G features mixed in by accident.

 

I was the same when i did mine. i spent ages checking and re checking which one to cut out.  I can't recal if that kit also includes the parts for the G chin mount.

Thnaks. I always thoguth they had the rotors vertical when on the ground. It wa sonyl when i saw some on the line at RAF Mildenhall that i realised they tilted them, and most of the pics also show that. It is a rather nice way to display it.

Congrats Bish on finishing the Osprey, it looks fantastic, espcially showing the rotors in a semi tilt postion. 

Bish

 

 

modelcrazy

That's intresting that you have to cut out waistgunner openings. I guess the positions moved from one model to another.
As far as the ball, personally I would hand paint it. I seem to mess things up worse when I mask.

 

 

 

 

Steve, on most B-17, the waiste gun positions were directly opposite each other. this caused a probleml as the gunners would get in each others way. Part way through the 17G production, the right side position was moved so they were staggered. The Academy 17F and G share the same fuselage. So they block off both positions on the right and have you cut out the one you need. I rather like that idea rather than being fixed with what you get as in the Revell 17G.

 

Bish, so far, I really like the kit.  The instructions are so simple and the kit is well thought out.  Fit is really good.  The sprue gates are really thick though and care must be taken to cut the parts off the tree.

But oh oh Scooby Doo, I thought I may have cut the wrong opening, but nope, I cut the one directly in line from the opening on the other side.

I still have my old Hasaqawa G model I built some 30 years ago to reference any differences.  So hopefully I will not get any G features mixed in by accident.

Thanks Steve. It does look better in the pics than in reallife, but its passable. I normally do my own tarmac, but i had some bits of a verlinden set left and just patched it together from bits and pieces. They do, or at least used to do, several differant aprons like this, and i kow there are a couple of other companies that do them now. They look nice, but don't have any texture to them.

From what otehr guys have said, this is a CAG bird, which means it is kept nice and clean at most times, and this is shown just ofter the unit was formed and recieved its Ospreys.

And will do. I am going to do the figures this week and then its juts a case of painting and adding the chocks once they come.

Bish,
Great save with the decals. That had to be a nightmare trying to match those lines.
The build really looks good on the base. Did you make the apron or did you purchase it? I’m sure the Marines keep the mounts pretty clean so the lack of weathering is probably pretty accurate….it just came from a wash.
Just let us know when you finished with the dio and Cody will get you up on the wall.

Steve

I have managed to get the osprey finished. The main problem i had was with the large stripped decals on top. They are rather fragile, and while there was a little damage to the one son the fuselage, that was easy to fix. But the left wing decal completly fell apart. One of the guys on Brit modeller was kind enough to send me a couple of spares he had. But what i did not realise is that these came in two shades, and mine was the dark one and yes, you guessed it, the ones he sent were a lot lighter.

So after giving it some thought, i apllied the decal and then painted over the ligt strips with a darker colour that was a close match. Of course its not as neat as the decals, but after going over it a couple of times its better than just leaving it.

And afer a flat coat, i added the whels and engines and secured it to the base. I did say this build would not be weathered to match the pics, and i certainly meant that. A nice change for me.

But i am not calling this done quite yet. I have just got a set of Revell modern pilot figures so i should be able to get all i need now, but it just won't be complete until i can add some chocks, which will have to wait until next month.

Bish,
That's good info, I kina always wondered how the gunners keep from getting in each other’s way, and I guess they did until the G. That does make sense to be able to adjust from one model to another.

modelcrazy

That's intresting that you have to cut out waistgunner openings. I guess the positions moved from one model to another.
As far as the ball, personally I would hand paint it. I seem to mess things up worse when I mask.

 

Steve, on most B-17, the waiste gun positions were directly opposite each other. this caused a probleml as the gunners would get in each others way. Part way through the 17G production, the right side position was moved so they were staggered. The Academy 17F and G share the same fuselage. So they block off both positions on the right and have you cut out the one you need. I rather like that idea rather than being fixed with what you get as in the Revell 17G.

scot, some nice work on the B-17. How you finding the kit.

Hi Steve,

I just painted a section of the ball turret by hand, your right, thats the better way to go. Even thought it will take a few coats. The curves and details are just too tight to mask.  Its like painting a miniture Tie Fighter.  Keep thinking I'm staring at Darth Vader.

That's intresting that you have to cut out waistgunner openings. I guess the positions moved from one model to another.
As far as the ball, personally I would hand paint it. I seem to mess things up worse when I mask.

Now the fun begins.  I will start closing up the fuselage, but before that, I need to mask up the ball turret.  Any ideas?  I have Frisket that I will try.

The kit has you cut out the RH side gun position.  

My weekend update on the B-17.  I am into the cockpit and interior. The kit has parts for three different models of B17 and I put the instrument decal on the wrong instrument panel.  I'm not going to stress over it.  I wanted to buy the zoom card and PE set but thought against it because at 1/72, it will never be seen but by the occassional spider.

1/144 scale seem like a very workable scale for the B-52

moving slow but making progress on B-52H 

Awesome!  Thanks for the info!

Not finished yet, some more small bits to add and finish decalling

Good to see you start on this Scott.

Thanks Steve for adding me,

Here are pics of me out of the starting gate on the B17F.  Just done all the interior airbrushing and sprayed the parts that need black.  The kit has a lot of parts from looks like when Academy offered a B17D and a mix of parts for a G.  There are small horizontal stabilizers and the bottom gun blister for a D and two sets of clear noses for an F, and G.  Two sets of cowels and props, but all go to either a D or F and are idenitcal.  So I got spares.

Aussie747-  Hey man just wondering if you are finished and would like me to post your KC's picture up,  or do you plan on more photos?  Thanks!

Good to see it coming along jack.

About three evenings spent on Peashooter cockpit.  Scratchbuilt the control stick, (though difficult to tell from picture angle, will get better shots when painted up...) as the plastic part was way out of scale.  Not fully done the two IP's as I need to paint the surface black and add white to the backside of the clear acetate.

Not much left on PE fret, some hubs for the wheels, three parts for the cockpit door, the main IP and two options for the secondary IP.  The windshield is interesting, I think I will be able to create the 'glass' sections with Testors clear parts cement after it's all painted up.

regard,

Jack