Just seen this one on scalemates.

 And not content with tanks, planes and ships, there is now this.

GH: Love that idea!!! If someone can do it as a badge it's certainly in! 

Greg & Bish: Whoa, I hadn't seen these yet! Friggin' awesome! 

My artwork ability is limited to crooked lines with a straightedge......Here's where Cody would be nice to have back.

Got to find one of the B-24's, that thing is just flat out nice.

Gamera,

If you deceide to kick off this idea into a GB I'm in!! This is the kit I have to bring to the table.

goldhammer

My artwork ability is limited to crooked lines with a straightedge......Here's where Cody would be nice to have back.

Got to find one of the B-24's, that thing is just flat out nice.

 

Its says its due for release this year, but not sure when.

Drifter: I've got more than enough interest by now to make this a go. I was hoping for at least a half-dozen people to jump in, we're at maybe three times that at least so far. 

I told you there was going to be high intrest. Good idea Gam.

How about these? I don't have them, but would like to.

I'd have to figure out how to make toon water LOL

Thanks guys......you just keep adding to my wish list

Are they available or coming out later?

modelcrazy

I told you there was going to be high intrest. Good idea Gam.

How about these? I don't have them, but would like to.

I'd have to figure out how to make toon water LOL

 

I have a lot on my plate right now, but if it runs long enough I will jump in. I have been wanting to build one of these "fun" vehicles for quite some time.

Steve: Thanks! But thank Gregbale too, his post here really pointed out just how much interest there was. Thanks Greg!!! 

And some awesome egg ships there! 

Dutchman: I'm thinking six months since most of these kits are pretty simple. If there's enough interest of course we could go up to a full year. 

modelcrazy

I told you there was going to be high intrest. Good idea Gam.

How about these? I don't have them, but would like to.

I'd have to figure out how to make toon water LOL

 

I am planning on the u-boat for this GB. Not thought about how to display it. The usual nice wooden base seems a bit to sensible.

I wounder if the kit comes with the fish.

goldhammer

Thanks guys......you just keep adding to my wish list

 

Are they available or coming out later?

 

Those ships ones are already out. But Meng seems to be giving out a steady flow of new subjects at the minute.

Bish

I wounder if the kit comes with the fish.

I wondered the same thing about the Ghidora-sized bald eagle perched on Missouri's 'B' turret....

Bish

 

 

modelcrazy

I told you there was going to be high intrest. Good idea Gam.

How about these? I don't have them, but would like to.

I'd have to figure out how to make toon water LOL

 

 

 

 

I am planning on the u-boat for this GB. Not thought about how to display it. The usual nice wooden base seems a bit to sensible.

I wounder if the kit comes with the fish.

 

I beleive they come with 2 gold fish

The Drifter

 

 

Bish

 

 

modelcrazy

I told you there was going to be high intrest. Good idea Gam.

How about these? I don't have them, but would like to.

I'd have to figure out how to make toon water LOL

 

 

 

 

I am planning on the u-boat for this GB. Not thought about how to display it. The usual nice wooden base seems a bit to sensible.

I wounder if the kit comes with the fish.

 

 

 

 

Hey Bish,

 

I beleive they come with 2 gold fish

 

O, nice, in that case i will have to get a fish tank.

That looks a wee precarious.

Bish

 

 

The Drifter

 

 

Bish

 

 

modelcrazy

I told you there was going to be high intrest. Good idea Gam.

How about these? I don't have them, but would like to.

I'd have to figure out how to make toon water LOL

 

 

 

 

I am planning on the u-boat for this GB. Not thought about how to display it. The usual nice wooden base seems a bit to sensible.

I wounder if the kit comes with the fish.

 

 

 

 

Hey Bish,

 

I beleive they come with 2 gold fish

 

 

 

 

O, nice, in that case i will have to get a fish tank.

 

The Drifter

Gamera,

If you deceide to kick off this idea into a GB I'm in!! This is the kit I have to bring to the table.

 

this is the first one i built and MENG learned from it. future tow cables are separate parts and not molded onto the hull like this one. not even annoying but takes a steady hand to paint them. i superglued the track sag using foam earplugs as wedges. i have another i will do as i rattle can primed this in the garage at 95F and the paint dried before hitting the model. nice cast effect for a 1/35 but a bit much for this so an afternoon of thinner and Q-tips smoothed thiNgs out.

TO REPEAT FOR EVERYONE. THE FIT IS TIGHT so built as much as you can before painting, mask off all axles and hull suspension holes, etc or you will be sanding and scraping to make the fit. that was lots of fun with the side skirts on the PZ-IIIN and i should have known better.

modelcrazy

I told you there was going to be high intrest. Good idea Gam.

How about these? I don't have them, but would like to.

I'd have to figure out how to make toon water LOL

i have LEXINGTON and the Uboat. you could get some clear plastic sprue and mount it just above a seabed base.

waynec

 

 

modelcrazy

I told you there was going to be high intrest. Good idea Gam.

How about these? I don't have them, but would like to.

I'd have to figure out how to make toon water LOL

 

 

 

i have LEXINGTON and the Uboat. you could get some clear plastic sprue and mount it just above a seabed base.

 

I have the Lex and will be getting the u-boat. You gave me an idea of the sub stocking the carrier, wrong theaters but might as well distort the facts as well as the subjects. 

Thanks for the info on the tigger. I have that one as well.

The Drifter

Gamera,

If you deceide to kick off this idea into a GB I'm in!! This is the kit I have to bring to the table.

 

 

this is the first one i built and MENG learned from it. future tow cables are separate parts and not molded onto the hull like this one. not even annoying but takes a steady hand to paint them. i superglued the track sag using foam earplugs as wedges. i have another i will do as i rattle can primed this in the garage at 95F and the paint dried before hitting the model. nice cast effect for a 1/35 but a bit much for this so an afternoon of thinner and Q-tips smoothed thiNgs out.

TO REPEAT FOR EVERYONE. THE FIT IS TIGHT so built as much as you can before painting, mask off all axles and hull suspension holes, etc or you will be sanding and scraping to make the fit. that was lots of fun with the side skirts on the PZ-IIIN and i should have known better.

[/quote

waynec,

Thank you for the heads up on this.

I have my entry, about time i got one of these.

Bish

I have my entry, about time i got one of these.

 

I've started getting mine together as well:

Those look great guys!!!

This is going to be fun!

te user="gregbale"]

Bish

I have my entry, about time i got one of these.

 

[/quote]

I forgot. i have this fire truck too and the big Revel 1/25 one.. May also do a Soviet MAZ-537 8x8 as civilian using the high vis greenish yellow for civilian categories at contests. have a Ural 6x6 that will be orange. NOTE. thes

Greg, love the Phantom....as a former phixer back when going to have to get one of those.

Going to toss in a Tiger and a Sherman to go with the Panther, all Meng's,....all 3 with appropiate paint work for the thought process in my twisted little mind.......

Just wiating for it to kick off.

Bish

I have my entry, about time i got one of these.

 I still haven't gotten one of those yet. Does it come with a fish?

modelcrazy

 

 

Bish

I have my entry, about time i got one of these.

 

 

 

 I still haven't gotten one of those yet. Does it come with a fish?

 

Unforunatly not, but i might see if i can come up with somthing.

waynec

I forgot. i have this fire truck too and the big Revel 1/25 one.. May also do a Soviet MAZ-537 8x8 as civilian using the high vis greenish yellow for civilian categories at contests. have a Ural 6x6 that will be orange.

I've waited for years for some manufacturer to do a 'real scale' version of a fire-fighting Oshkosh...but this is the closest to appear. Fortuitously, this GB makes the perfect venue for it!