SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Larry Wolf Memorial Close Air Support Group Build 2021 Needs YOU!

55876 views
561 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2017
Posted by StugIIIG on Saturday, April 17, 2021 8:19 AM

Thank you!  I finally found more last night, too.  There seemed to be multiple places they attached bombs on to the wings.  This was one, another was aft and outside these pylons when using the fuel pods and another has the two each outboard the engines on the wings.  

I could attach 6 500 lbs bombs, since the P-38H supposedly had the capacity, but I've seen some heated internet "debates" over it's REAL capacity to know that that could start a S-Storm with some folks.  Maybe I'll do it anyway.  Eduard has a really nice set of 6 bombs so why not use them all?

  • Member since
    June 2017
Posted by UnwaryPaladin on Wednesday, April 21, 2021 7:17 AM

Lewbud, I'd like to enter with a Tamiya 1/72 Aichi M6A1 Seiran. Not on the list, but meets the criteria for the groupbuild. I will defer to your judgement, thanks!

Joe

  • Member since
    May 2004
  • From: Land of Lakes
Posted by cbaltrin on Wednesday, April 21, 2021 7:26 AM

UnwaryPaladin
I'd like to enter with a Tamiya 1/72 Aichi M6A1 Seiran. Not on the list, but meets the criteria for the groupbuild


Does not sound like a 'close air support' type of a/c to me , however, I think it meets the  very loose criteria defined for this GB Wink

lewbud
Dedicated attack aircraft definitely allowed

Based on that, I would say you are good to go...

On the Bench: Too Much

  • Member since
    May 2004
  • From: Land of Lakes
Posted by cbaltrin on Wednesday, April 21, 2021 7:34 AM

Still have not decided what to build for this. Has to be simple, low parts count.. Was thinking something in 1/72.. Perhaps an Airfix F-111 if I can find one on the cheap  or an  A-7A/D/E from Airfix, revell or Italeri (not Fujimi, want to try something new)... Then again I would  not mind doing a Huey gunship... or a Heller T-28... or a skyraider... a decisions...

On the Bench: Too Much

  • Member since
    June 2017
Posted by UnwaryPaladin on Wednesday, April 21, 2021 12:38 PM

cbaltrin

 

 
UnwaryPaladin
I'd like to enter with a Tamiya 1/72 Aichi M6A1 Seiran. Not on the list, but meets the criteria for the groupbuild

 


Does not sound like a 'close air support' type of a/c to me , however, I think it meets the  very loose criteria defined for this GB Wink

 

 
lewbud
Dedicated attack aircraft definitely allowed

 

Based on that, I would say you are good to go...

 

 

I wanted to avoid redundancy, hence the unusual subject. I have a few others in the stash that definately fit the bill, so if the Sieran does not qualify, no problem!

  • Member since
    April 2014
  • From: Australia
Posted by lostagain on Sunday, April 25, 2021 7:21 AM

Frank, you are a machine!

Liking the look of the Tigercat, how are you going with the Montex masks?

StugIII, only 6? I'm sure you could fit more on there...

The vengeance has wings on and all panel lines scribed - well all the ones I am going to do.

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Sunday, April 25, 2021 4:20 PM

There are a few details I am skipping on the A-18, like the little hinges on the rudder.  The decals were very fragile and the less handling the better.  Looks cool the way it is, in my bookParadise

I used Alclad 101 aluminum rubbed with SNJ aluminum powder for the metal areas, and Alclad white aluminum for the fabric.  The landing gear legs may have more metal in them than resin, they are very fragile, and were also too short.  All's well that ends well.  I wish I has a P-36 in 1/72 to pose with it, the P-39 is the closest I could come age-wise, and of course the Bell YFM-1B Airacuda, like the A-18, another design based on mistaken conceptions and whose time was past before it ever arrived.

 

 

 

 

 

 

 

http://goldeneramodel.com/mymodels/a18/024a18.jpg

 

 

 

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    April 2014
  • From: Australia
Posted by lostagain on Monday, April 26, 2021 7:06 AM

Hi John, the A-18 looks great - that is an unusual subject really well done. Great NM finish

Had to read up a bit on the Shrike and then the Airacuda - quite a pair. ANd your issues with the landing gear sounds just like the real thing.

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Monday, April 26, 2021 8:05 PM

Thanks, Piers!

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Thursday, April 29, 2021 7:20 PM

Got some work done on the Sea Hawk

 

  • Member since
    May 2020
  • From: North East of England
Posted by Hutch6390 on Friday, April 30, 2021 2:24 PM

tempestjohnny
Got some work done on the Sea Hawk

That looks fab - very nicely done.  The Fleet Air Arm scheme is beautiful and the invasion stripes are the icing on the cakeCake!

Vell, Zaphod's just zis guy, you know?

   

TakkaTakkaTakkaTakkaTakkaTakka

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Friday, April 30, 2021 3:09 PM

Nice work on that Sea Hawk TJ, looking good.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    May 2004
  • From: Land of Lakes
Posted by cbaltrin on Saturday, May 1, 2021 6:07 AM

Nice work  John. Facinating how these aircraft designs evolved..would have loved to have been around back then... 

Really love the last picture with the 3 kits and truck.  Is that the airfix p-39? Just curious...

On the Bench: Too Much

  • Member since
    May 2004
  • From: Land of Lakes
Posted by cbaltrin on Saturday, May 1, 2021 6:17 AM

Does this qualify for the GB? WhistlingWhistlingWhistling

Butcher Bird

On the Bench: Too Much

  • Member since
    June 2017
  • From: Winter Park, FL
Posted by fotofrank on Saturday, May 1, 2021 1:13 PM

cbaltrin

Does this qualify for the GB? WhistlingWhistlingWhistling

Butcher Bird

 

That must have been a very scary airplane to fly. Very scary.

OK. In the stash: Way too much to build in one lifetime...

  • Member since
    July 2008
  • From: Vancouver, the "wet coast"
Posted by castelnuovo on Saturday, May 1, 2021 1:43 PM

tempestjohnny

Got some work done on the Sea Hawk

 

Looks great! Are the stripes decals or painted?

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Saturday, May 1, 2021 2:05 PM

Pull the trigger and the plane goes backwards!

Thanks,

John

  • Member since
    April 2019
  • From: South west, PA
Posted by Tomcat on Saturday, May 1, 2021 4:59 PM

fotofrank

 

 
cbaltrin

Does this qualify for the GB? WhistlingWhistlingWhistling

Butcher Bird

 

 

 

That must have been a very scary airplane to fly. Very scary.

 

I don't know if its scary to fly, but being shot at by it....yes, very scary!

Mark aka Tomcat

On the workbench: Monogram 1/24 '69 Pontiac GTO and a Monogram 1/67 (box scale) B-26 Invader

  • Member since
    July 2014
Posted by modelcrazy on Saturday, May 1, 2021 10:30 PM

I just learned a few minutes ago the Lewbud Larry "Buddy" Wolfe II passed away on Jan 30. 

Mopar Madness (Chad), mostly Chad, and I did some investigation and found this obituary.

https://www.google.com/amp/s/www.dignitymemorial.com/obituaries/arlington-tx/larry-buddy-wolfe-10037737

The obit does not give a cause and Chad has put up a memoral thread in the Ready Room.

Rest in peace Buddy, you were a good friend of mine and had a very soft and giving heart.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    May 2004
  • From: Land of Lakes
Posted by cbaltrin on Saturday, May 1, 2021 10:43 PM

Was afraid of this..very sad...

On the Bench: Too Much

  • Member since
    July 2014
Posted by modelcrazy on Saturday, May 1, 2021 11:03 PM

-

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Saturday, May 1, 2021 11:12 PM

How sad, and too young.  I sent an email to Elizabeth Nash asking if the GB could be retitled to something like the Larry Wolfe Memorial Close Air Support Group Build.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Saturday, May 1, 2021 11:28 PM

Sad - way to young.  

Thanks,

John

  • Member since
    April 2015
Posted by Mopar Madness on Saturday, May 1, 2021 11:30 PM

jeaton01

How sad, and too young.  I sent an email to Elizabeth Nash asking if the GB could be retitled to something like the Larry Wolfe Memorial Close Air Support Group Build.

 

Great idea!

Chad

God, Family, Models...

At the plate: 1/48 Airfix Bf109 & 1/35 Tamiya Famo

On deck: Who knows!

  • Member since
    March 2008
Posted by Caveman on Sunday, May 2, 2021 2:25 AM

Shocked to say the least.  RIP buddy.

 

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Sunday, May 2, 2021 5:43 AM

castelnuovo

 

 
tempestjohnny

Got some work done on the Sea Hawk

 

 

 

Looks great! Are the stripes decals or painted?

 

Decals. I wasn't sure if I wanted to try them or not. But I figured I'd try and if they looked bad I would paint them on. They came out pretty good

 

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Sunday, May 2, 2021 5:44 AM

cbaltrin

Was afraid of this..very sad...

 

Me too. He hadn't been on in quite awhile. RIP Buddy

 

  • Member since
    March 2017
Posted by Armor_Aficionado on Sunday, May 2, 2021 8:52 AM

Update on the A-10 - got the overall painting done, camo scheme of Dark Ghost Gray over Light Ghost Gray:

False canopy in Gunship Gray on the underside:

and, got the weapons load painted:

 

 

 

 

 

 

  • Member since
    April 2020
Posted by Eaglecash867 on Monday, May 3, 2021 8:20 AM

Started working on the last of the internal details for the fuselage on the Frog.  Got the avionics bays all painted up and mostly finished...just have a couple of equipment panels that need to get painted and installed.  Then its on to making a little styrene box to put behind the holes for the foot steps.  I'm going to fill the box with Milliput, which I'll then carve out to simulate the canvas "bags" that line the insides of the steps.

 

"You can have my illegal fireworks when you pry them from my cold, dead fingers...which are...over there somewhere."

  • Member since
    April 2014
  • From: Australia
Posted by lostagain on Monday, May 3, 2021 8:35 AM

 

Caveman

Shocked to say the least.  RIP buddy.

 

 

Oh wow, that is so sad. RIP Lewbud, thanks for the (weekend) madness

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.