SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

AFV Club 1/35th M10 TD...

4356 views
30 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2009
  • From: SW Virginia
AFV Club 1/35th M10 TD...
Posted by Gamera on Sunday, May 18, 2014 6:44 PM

Just finished this for Hunters II Group Build. The AFV Club kit build right outta the box, I only added some storage and a set of AFV Club turned brass 76mm ammo. This is my first attempt with a heavy distressed whitewash scheme. I added a little model railroad 'snow' - I'm not sure I like it or not, I guess I can still remove it with a heavy stiff brush.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    December 2013
Posted by CodyJ on Sunday, May 18, 2014 7:54 PM

Looks really Great Gamera.  I like the fade in the middle.  The supplies tied to the back is a neat touch too.

  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Sunday, May 18, 2014 7:55 PM

Nicely done. An impressive build.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Sunday, May 18, 2014 9:05 PM

I like it! Well worn from hard fighting in the Ardennes.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Sunday, May 18, 2014 9:17 PM

Hey thanks guys, that means a lot! I tried a couple of new things here and I think they mostly came out pretty good. Funny, I tried some colour modulation but you can't see it for the whitewash and mud!

You guys think the 'snow' looks ok? As I said I thought about removing it, still sorta sitting on the fence. I tried to concentrate it where I thought it would collect and away from the warm areas like the engine deck and where the crew would knock it off.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    January 2006
  • From: California
Posted by SprueOne on Sunday, May 18, 2014 9:48 PM

Your first attempt at distressed white wash looks good.

The 'snow' works for me. The white wash explains the winter snow story. If it was an olive green tank with the same sprinkling of snow on a non diorama, plain base like that, then it may not have been as clear 

Anyone with a good car don't need to be justified - Hazel Motes

 

Iron Rails 2015 by Wayne Cassell Weekend Madness sprueone

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Sunday, May 18, 2014 10:21 PM

Thanks SprueOne. I'm intending on working her into a small dio with an abandoned German tank sometime in the future so I just slapped her on an unfinished base just for the photo.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    December 2013
Posted by CodyJ on Monday, May 19, 2014 12:02 AM

Yeah Gamera I like the snow.  Especially the fine layer on the top.   I especially like seeing the star even though there is a white wash and snow layer.  Very realistic.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Monday, May 19, 2014 2:48 AM

OK, now I got a better look at the photos on my tablet as opposed to my tiny phone screen. The snow effect definitely works. One thing I might suggest for your diorama is some wet spots or pools on the engine deck to suggest melted snow in that area from the heat of a running engine.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, May 19, 2014 7:33 AM

Thanks again guys!

Cody: Yeah I was very happy with how the white star comes though the whitewash like that. Wasn't really planned but it was a lucky accident! The vehicles I looked at didn't seem to have much other in the way of markings.

SP: I like the idea of the melted snow but not sure how to do it without having tell people that it's supposed to be wet and melted snow and not glossy areas I missed on the model!  

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    January 2007
Posted by the doog on Monday, May 19, 2014 10:27 AM

Looks really nice. I would definitely add some glossy streaks though, to simulate meltwater and even frozen ice trails down the sides.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, May 19, 2014 10:29 AM

Thanks Karl, didn't think of that. Great idea - I'll see what I can do.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    March 2014
Posted by BarrettDuke on Monday, May 19, 2014 10:37 AM

Gamera. Fantastic build. I don't know how the snow looks in real life (The camera shapes perspective and reveals things my naked eye does not pick out initially.), but it sure looks good in the pics. Congrats on the snow. I have always felt that it would  be really hard to depict a snow scene. But with yours, I felt cold just looking at it. Then I got to thinking about the men who had to sit in that during the winter. In my opinion, the best tribute one can get from a model is to know that it causes people to imagine the real thing. Well done and congratulations.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, May 19, 2014 11:04 AM

Thanks BD, not sure if she's all that but a big thank you all the same!!! Not sure when I'll get around to the abandoned German AFV and the dio but I do have this set of American tankers in overalls that I plan to use. Really nice set, they really get across the impression of these poor guys freezing their tails off in the Bulge. As you said if I can get across even a little bit of the blood, sweat, toil, and tears of these guys to give us what we have today I'll be very happy. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Monday, May 19, 2014 11:29 AM

I do love those Miniart figure sets! So realistic in their poses. Karl's idea of meltwater and ice streaks on the side is a dang good one I think!

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    January 2003
  • From: Hancock, Me USA
Posted by p38jl on Monday, May 19, 2014 12:21 PM

Looking pretty sweet.. !!

I did a similar build a few years ago of the same tank..

[Photobucket]

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, May 21, 2014 10:58 AM

Hey thanks P38!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in central North Carolina.
Posted by disastermaster on Wednesday, May 21, 2014 2:10 PM

This looks super/great and all the advice given should greatly enhance your efforts.

 It would surely look fitting setting next to my M4A3E2 Sherman.

 The snow on the tracks (needs some on the front) looks proficient however I DO believe you need to mix a bit 'O mud with the track/snow effect though.

 Now, you just need to plop a drop of flat black down the barrel of that main gun.

                                  http://www.clawa.org/Images/drip.gif 

 Maybe it's just me, but I'm seeing a shine all the way down to the south pole in that barrel.

http://i852.photobucket.com/albums/ab85/Tempest977/US%20TDs/DSCN6395_zpsda54fdc2.jpg

 https://i.imgur.com/LjRRaV1.png

 

 

 
  • Member since
    December 2008
  • From: Goffstown, NH
Posted by New Hampshire on Wednesday, May 21, 2014 5:59 PM

I like it!  I like it a lot!  And what is funny is it reminded me of this historical snippet from the battle of the bulge I saw recently. 

Dec. 23, 1944 - "Battle of the Bulge" - An entire U.S. armored division was retreating from the Germans in the Ardennes forest when a sergeant in a tank destroyer spotted an American digging a foxhole. The GI, PFC Martin, 325th Glider Infantry Regiment, looked up and asked, "Are you looking for a safe place?" "Yeah" answered the tanker. "Well, buddy," he drawled, "just pull your vehicle behind me...

I'm the 82nd Airborne, and this is as far as the b*****ds are going."

Big Smile

Brian

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, May 21, 2014 7:01 PM

DM: Thanks and yeah on looking at the same photo there I noticed the shiny aluminum muzzle... I was just waiting for someone to point it out! Guess everyone was being polite until you were honest with me? Wink

I didn't put any snow on the front of the tracks since I figured the vibration and heat from the friction would melt it and bend it with the mud. Maybe? I dunno... The snow on the running gear does need to be blended in better, sorry first time with this and I'm kinda bumbling around in the dark. Thanks for the advice - I can use all I can get!

NH: Thanks! That's a good tale, wish I'd have that much guts while freezing my tail off!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    March 2007
  • From: Northeast WA State
Posted by armornut on Wednesday, May 21, 2014 9:25 PM

It doesn't take guts to freeze your tail off , you just have to believe in doing something bigger than yourself , no disrespect intended to those who served or the ones who still are or yourself  Gamera just saying, those of us who've been in harms way did it so hopefully NO ONE would ever have to face that challenge again. As I should have led off with , your model looks fantastic, for your "bumbling attempt" ya knocked it out of the park. Thanks for showing and keep up the good work.

we're modelers it's what we do

  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in central North Carolina.
Posted by disastermaster on Wednesday, May 21, 2014 11:54 PM

Gamera

DM: Thanks and yeah on looking at the same photo there I noticed the shiny aluminum muzzle... I was just waiting for someone to point it out! Guess everyone was being polite until you were honest with me? Wink

I didn't put any snow on the front of the tracks since I figured the vibration and heat from the friction would melt it and bend it with the mud. Maybe? I dunno... The snow on the running gear does need to be blended in better, sorry first time with this and I'm kinda bumbling around in the dark. Thanks for the advice - I can use all I can get!

 Nothing wrong with being honest about questionable details as it can be a big help; it's just how you say it that counts for a lot. That's one way wars could be avoided.

 About the track snow. If it was on the track (at the rear just after leaving the frozen ground) and headed toward the front http://www.foromedios.com/public/style_emoticons/default/41873.gif it's just a matter of seconds before that frozen snow would be present at the front.

And as far as first time goes...... 

        "we all   have to start somewhere".

 https://i.imgur.com/LjRRaV1.png

 

 

 
  • Member since
    January 2013
Posted by jibber on Thursday, May 22, 2014 7:52 AM

Gamera thats one great build, I especially like the way you blended in the weathering. Your winter weathering is awesome and you can see the attention to detail on every part, real niceā€¦.

Terry

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Thursday, May 22, 2014 8:47 AM

Armornut: Thanks and good point there!

Terry: Hey thanks!

DM: Thanks a bunch for the help, I've been doing stuff the same old way for years and I'm trying to pick up some new stuff from guys like you and Karl. It's been a little difficult for this old dog to pick up some new tricks and I appreciate the help!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in central North Carolina.
Posted by disastermaster on Thursday, May 22, 2014 11:28 AM

          

     

                                                                             http://www.sherv.net/cm/emoticons/hand-gestures/thumbs-up-smiley-emoticon.gif

 https://i.imgur.com/LjRRaV1.png

 

 

 
  • Member since
    April 2014
Posted by r13b20 on Monday, June 2, 2014 6:46 PM

I agree with all of the above. Nice destroyer. Which way to Bastogne? Bob

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Monday, June 2, 2014 11:08 PM

That is pretty cool looking - now I know why you haven't posted  much progress in the Japanese III GB - lol.

Again, Nicely done. Yes

regards,

Jack

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Tuesday, June 3, 2014 7:23 AM

Hey thanks guys!

Jack: You got that right- it's one of about a dozen distractions... I wish I could be one of the those people who start one kit and work at it till I finish and then start another instead of having about two dozen unfinished projects lying around.

"I dream in fire but work in clay." -Arthur Machen

 

cml
  • Member since
    March 2007
  • From: Brisbane, Australia
Posted by cml on Tuesday, June 3, 2014 7:41 AM

I really like this build Gamera, I especially like the transition between the mud and the white camo.  What that airbrushed?

Chris

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Tuesday, June 3, 2014 8:19 AM

I really like it,looking good from the whitewash and weathering along with the stowage,nice job.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.