Revell 1/96 Cutty Sark

damn that looks neat!

I also added a barrel of copper nails for the copper sheets

Little closer image of the work on the rudder and the tools and parts

one from the bow.......a wood gang is present on the port side just at the prow.

You can see the outrigged set up a bit clearer in this image.

I worked in the jury rudder control..which was done via outboard blocks and rope/chain attached to the rudder.  This side is still intack and tide off at the ways........

Finished the bow railing

And repair tools and parts

Some more work.  I added some details...like a ladder

I did further research and I will wash over the pintles and gudgeons with a green/brown wash to discuise them as bronze.  Thanks for the *clue*.

Rob

I agree.........much happened to the CS...so I wanted to depict one instance.....the most memorable

Nice to see the depliction of the busted rudder event.  Can you imagine doing that at sea with the weight and seas running? Wooden ships - Iron Men

I enjoyed building the ways and detailing them along with weathering them.....I had fun.  I think it looks good too.

Rob

Thanks for the fine observation...I know about the disimilar metal issue..but chose(through license) to paInt the pintles nd gudgeons black...a detail most will never be aware of and less familiar with the metal issue.   Thanks a lot.

I'll take the liberty of making a small suggestion.  (I wouldn't do it if it wasn't an easy fix.)  The rudder pintles and gudgeons on a copper- (or Muntz metal-) sheathed ship can't be made out of iron.  When iron and copper (or Muntz metal) are put in contact with each other and submerged in salt water, galvanic corrosion takes place and the copper dissolves.  Pintles and gudgeons on such ships have to be cast from either copper or bronze.  (I don't know whether Muntz metal can be cast into such shapes or not; I guess it probably can.)  

Shipwrights made this discovery in the early days of copper sheathing.  They nailed the sheathing plates in place with iron nails.  After a few months the sheathing plates started to fall off, because corrosion had eaten away the material adjacent to the nails.  From then on, shipwrights used copper spikes for the purpose.  

So the pintles and gudgeons should be the same color as the surrounding sheathing - not black.

Lots of ladders will be added  and wood and tools and stuff..........minor issues....but great details.

Rob(thanks for your fine comments)

Howzabout a ladder so we yardbirds can get up onto the scaffold to do some work??

Top view of scapold and new rudder to be installed

Showing scafold

More closeups of the jurry rudder being replaced

Looking down the ways

Some closeups of the bow getting some new copper

Here are some pics of the CS on its ways for repairs

Thanks..I appreciate that..but I will be using the rudder that comes with the kit as the replacement rudder in the diorama..........:)

If you need another rudder I will send you one, free.

Dave

I finally figured out what to do with my model.  create a diorama..yep.

I built a *ways* from strip redwood..1/8" and mounted and supported the CS...then I decided I would create a ficticious scene where she was getting her gurry rigged rudder replaced...a ficticious scene based on actual events.  I will also make replacement of some copper sheets being depicted as well.

Fun fun fun.

pictures will follow later.

Rob

little larger view of the entire ship

And some rope detail at the davits

Added the spars and forward boat skid

And one looking aft.......wish I was a better modeler..my aging hands are trouble.

Now for the railing