Revell Sport Fishing Boat

Its looking great. Keep up the great work. Looking forward to the finished piece.

Hi,

I've started adding a gloss coat to the main hull.  The first coupole coats I tried with a brush, but you could see the brush strokes.  So after waiting a day to dry I tried using one of those "sponge" type brushes and the clear (Pledge Floor Care) appears to have gone on a bit smoother.  I may wait another day or two and try a final coat (or two) to see how everything looks.

In addition to that I alsopainted a lip around the upper bulwark to try and loo a bit like wood.  Its hard to see below, but it is meant to look similar to what is shown in the bottom picture.

I also tried adding a gold rub on stripe, but it didn't look so good, so I ended up deleteing/painting over it.

Hopefully, after adding the gloss coat Imay try and polishing the surface just a little, and then try and finish off the back end, before starting on the main deck and deckhouse structure.

Pat

Looking spiffy!

Progress is looking very good and moving along nicely.  Another example of a  "vintage" kit being turned into a gem.

TJS

Looking great Pat! Keep up the great work.

Jim 

Stay Safe.

Hi,

Although it might not look like a whole lot of progress, I have been able to make some headway recently on this build.  For the most part it has been taking me a lotof time trying to get the boot topping on, but I think I am almost done. 

In addition, although I liked the Aqua upper hull color that I had been using, I was having a little trouble geting it on smoothly and eventually and with my poor eyesight, it was kind of hard to differentiate it from the turquoise I used for the hull bottom.  So I ended up redoing the upper hull in Bright Blue.  In addition I more or less have finished up cleaning up the aft swim platform. 

So now, once I make a few final clean ups to the boot topping, and give the hull bottom one last coat of turquoise to clean up a little but of splatter, and replace one of the props that I acceidentally knocked off,  I hope to have the base hull more or less ready for a gloss coat.

Pat

mfsob

Don't know why it's happening, but my Malwarebytes program is blocking your photo links because it thinks they're trojans.

Hi,

Thanks for the heads up.  It looks like my website's SSL certificate had expired, which may also explain why my images weren't showing up, as well.  Please letme know if you are still having problems.

Thanks

Pat

Hi,

Sorry about that.  I will look into the settings on my website provider.

Pat

Don't know why it's happening, but my Malwarebytes program is blocking your photo links because it thinks they're trojans.

Hi,

Thanks for the interest.

Although I am still working on the boat, between the holidays, and some issues with painting, signs of visible progress have been really limited.  Most of the work that I have getten done lately has involved trying to smooth out some seems, reshape the stern area, and clean up the waterline boot topping.  Fortunately, I am pretty close tobeing able to put a gloss coat on the hull bottom.  But the hull sides still need some cleaning, sanding and buffing, before they will be ready to get glossed.

Hopefully I may be able to show some more progress later this week.

Pat

I havent noticed anymore updates. How is the project going?

Things are slowly progressing.  I've got the propellers and rudders in place now.

Pat

I'm really happy with my new 3D printer.  The detailis pretty impressive.  These props areboth about 12.5mm.  Right now they both turn the same way, but I hope to trim them both and mount one backwards.

Pat

PS.  I alsoneed toclean up the paint a bit.  Its kind of hard paiting them because of their size 

Hi,

Although it may not look much different, I did manage to carve out an anchor pockets (on both sides) and 3D print some anchors and rudders.  I am still working on the props and shafts though.  I also had a chance to try and get the other side of the boat further along as well. 

Pat

PS.  I've made a start at trying to addon the prop shafts and riudders, but may need to adjust them some.

Hi,

I got two packages of sunbathers in the mail today, for hanging out onboard the model once I'm done 

Pat

PS.  Here also is an image with the white boot topping.  It still needs a little work, especially forward, andI need to figure out how to add an anchor pocket.  (I probably should have thought of that earlier )

Shaping up nicely!

Jim 

Stay Safe. 

Hi,

Thanks Keavdog. 

Below is a picture of my latest progress.  I finally have decided on an Aqua Green upper hull with a light blue/turquois bottom and a white boot striping.

Pat

n

Hey Pat lots of surgery on this project.  She's looking good

Hi,

I've started messing around with some color ideas.

Pat

Hi Pat!

   Listen, When I was doing the Live-Aboard thing, Outside of Antioch Ca. in Bethel Island, I saw quite a few Chris-Craft and Owens Tri-Cabins from that era being used as well restored Live-Aboards. Beautiful Boats for the time!.

Hi,

I decided totry and print up some windows with my new 3D printer.  The blue stripe is just the tape that I am using to hold them in place for now.

I've also printed some freeing ports/lines hadling openings for the bulwarks and have downloaded a 3Dmodel for an anchor that I hope to print later this weekend.

Pat

Hi,

I wish that I could figure out why my photos are now showing up as links, all of a sudden, but in  the mean time here is an image showing a little progress.

Unfortunately when working on a project like this, sometimes I don't always think things through too well, and end up experimenting a bit.  Fortunately, the stern locker/garage and swim platform seem to look ok for now, from above at least.  I have noticed though that from below, things may look a little crooked, maybe in part because the original hull was a bitt off, but also maybe becuase I wasn't careful enough when measuring and cutting the hull insert 

Anyway, you can see how things are progressing along with a couple small 1/87 figures that I have.  I eventually also found some "beach scene" figures on eBay that I also hope to use, but they have not arrived yet.

I'm hoping soon to have the basic hull mostly finished up soon.

Pat

Hi,

Although it may not show it much, I've been making some progress on the hull.  First I reinforced and trimmed up the deck edge bulwarks, better shaped the deck into the hull, added some rub rails, trimmed back the transom and added a swim platform, and a rough shape for a stern "garage" (that I hope to clean up a bit).

I also bought some small generaic 1/87 scale people to place on deck.  

Regards

Pat

Cool 

Back in the "good old days" of RC boating, the guys in the club used to do a lot of modifications to the Dumas series of wooden Cabin Cruisers. 

https://photos.app.goo.gl/G92vFiHAnrwsHWJZ8

This isn't one of the 42'. Don't remember which one of the cruisers this is but I used to run it in the tank at the Phila. Boat Show in between the R/C sailboat races. Fwd., Rev., Port & Stbd. with dual 12 Volt engine control, all lights and a small tape deck with party noises & music. One of the Vendors wanted to play a joke on me by sending one of the guys from the Coast Guard booth over to inspect the boat. The joke was on them as it passed with flying colors. The signal flags were in their place in the locker with  the flare gun and the fire extinguishers had up to date inspection tags. Those Dumas kits were great fun and easy to build and easy to modify into many different designs.

Jim 

Stay Safe.

Hi,

Here is a quick image of the hull with its main deck in place (though not glued down yet) and another with a quick mock up of a rough notional superstructure.

Pat

Hi,

Here are some updates to the hull.

Although the original hull looked to be a single chine hullform, when I initially rescaled it to a larger boat I hadn't realized that the front end of the chine would look kind of low on the hull for the larger size.  As such, I'm kind of modifying it a little to make it a double chine hull with a higher upper chine, while also trying to smooth out the front end of the lower chine a little.

Pat

PS.  I don't know why the pictures are showing as links rather than inserted images, as I entered them the same way that I have done in the past.  But I think that the links (hopefully) will take you to the images, but I may be mistaken because sometimes I think computers will show an image from my cache instead of whats at the link, so please let me know if there is an issue in seeing them 

Hi,

I was able to find a second (complete) copy of this kit on eBay, so I decided to do a little kitbashing with this initial kit (that I bought knowing it was missing a few small parts).

Looking at the original boat, you can see that it is a bit short and stocky (Length overall/Beam overall of about 42/12.83 = 3.3 or so).  I started thinking about making the boat longer, but noticed that for a lot of power boats the L/B seems to go up a bit as length increases.  In general I noticed that for the hull, its bottom rake (slope) varies constantly over its length.  However, I found that if I cut the boat roughly in half I could add some mid section while smoothing over any discontinuities in the bottom since the bottom slope/rake was very low in that area.

The next issue though was that I couldn't really change the beam by much very easily, and that a beam of 12.83ft (or about 2.75in for the scale model) was kind of narrow for anything larger than the original boat size (of about 42ft).  I began to realize though that if I changed the scale of the model a little I could make a model of a bigger boat without adding too much midbody. 

In addition, I also realized the a larger boat would likely have a bit more hull depth, and that if I added some additional "strakes" above the existing top of the hull, the beam overall would go up a little more since the hull has a bit of flare in it.

In the end I decided on  changing the scale to 1/87 (HO scale) as opposed to its original scale of 1/56 since my (semi-) local hobby store stoicks some model train related stuff in 1/87 scale (including platic ladders and railings) 

The pictures below show where I was earlier today, with one side modified, and the other still only partially done.  One issue that I ran into was that when I cut the model in half I found that the basic hull was a bit asymmetric in shape with the sections being a bit concave on one side of the keel but a bit convex on the other side, as shown below.

As such I ended up gluing a thin sheet of styrene to the bottom of the hull to etither side of the keel to try and hide this weirdness in shape and to also help hide any "discontinuities" or flat spots in the bottom of the hull due to the added midbody.  In the end I also added a thin sheet of styrene to the modified sides of the hull too, to help clean up the relatively messing joints in the hull and to also add strength to the lengthened hull, as shown below (sorry that the images turned out a little fuzzy).

GThe 1st picture shows the port side of the hull with some strakes added on top to increase the hull depth and with its "outer plating" while the 2nd picture shows the starboard side before I added the upper strakes to increase depth and without its outer plating to make it look cleaner.  In this second picture you can also see the inside of the prt side of the hull where I added the extra strakes to increase its depth.

I was able to finish up the starboard side today, but am still working to clean up the "styrene sheet" joints and such.

In general, I'm hoping to try and make something roughly similar to the boat in this link, but not necessarily exactly the same as that boat.

Pat

Tanker-Builder,

Hi.  Your right, that aft cockpit space does liike pretty tight.  Looking at the model it is almost exactly 9" (without the bow pulpit) which scales out to about 42ft.  Doing a quick search on the internet does show several 42ft Chris Craft boats from the early 1950s of relatively similar layout, like in the links below.

And here are a couple other larger scale models of similar vessels.

As such, it probably does make more sense to convert the model to a Live Aboard cruiser than a sport fishing boat 

Using the pictures in some of these links and the rough layout sketch in the link below I might even be able to mock up a little bit of the interior if I really want to.