SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Region 5 Convention

10916 views
28 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Sunday, March 15, 2009 6:42 PM

Gerald- Great photos, thanks! Smile [:)]

Jeff-

Sorry about that!  I was wondering why somebody was standing there staring at me! Blush [:I]  Sure am glad I decided not to call security. Smile,Wink, & Grin [swg]

I remember that F-16, and talked to the owner a couple of times.  I have never heard of "Gulf Gray", but the color on that jet is "Dark Gull Gray".  It is FS36231, which testors has- #1740. Tamiya XF-54 and Gunze H57 are also pretty close.  HTH!

Frank 

 

  • Member since
    August 2006
  • From: Neenah, WI
Posted by HawkeyeHobbies on Sunday, March 15, 2009 6:16 PM
You should have said something, I would have liked to meet you again.

Gerald "Hawkeye" Voigt

http://hawkeyes-squawkbox.com/

 

 

"Its not the workbench that makes the model, it is the modeler at the workbench."

  • Member since
    September 2007
  • From: Crystal Lake, IL
Posted by firesmacker on Sunday, March 15, 2009 5:36 PM

Nice Gerald. I saw you a few times but you looked pretty busy each time so I didn't want to bother you. I'm not saying you would have brushed me off just that I would have litterally had to leap in front of you to remake your aquiantance.

On a side note, has anyone ever heard of "Gulf Grey"? I was admiring the 1/32 F-16 in the Alaskan camo, or Arctic Camo. I am building the same kit and wanted to do something similar. Me and some old guy were looking at the build and I remarked that I wished that I knew what colors he used, and this bitter old man mumbled what sounded like "Gull Grey". I thought he said "Gull Grey" so I was like "Maybe it's dark gull grey" And he barks at me "NO, GULF GREY!" and walks off mumbling to himself. Jerk.

But, yeah, meeting Frank was really cool even though I looked like a stalker when I was trying to read his hat...And Mike (Recon) Is a really cool guy too. Wish I wasn't so far south of you all.

  • Member since
    August 2006
  • From: Neenah, WI
Posted by HawkeyeHobbies on Sunday, March 15, 2009 9:47 AM
Link to some of my pictures.

Gerald "Hawkeye" Voigt

http://hawkeyes-squawkbox.com/

 

 

"Its not the workbench that makes the model, it is the modeler at the workbench."

  • Member since
    December 2007
  • From: Bridgeview, Illinois
Posted by mg.mikael on Sunday, March 15, 2009 9:07 AM
Thank you for explaining.

"A good plan executed now is better than a perfect plan next week." - George S. Patton

  Photobucket 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Sunday, March 15, 2009 7:40 AM
You're right!  It was in Madison, WI. Thumbs Up [tup]

Frank 

 

  • Member since
    December 2007
  • From: Bridgeview, Illinois
Posted by mg.mikael on Sunday, March 15, 2009 12:01 AM

Where exactly was the Region 5 convention?Question [?] I'm gonna assume someplace in Wisconsin.

"A good plan executed now is better than a perfect plan next week." - George S. Patton

  Photobucket 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Saturday, March 14, 2009 10:54 PM
What an exciting show!  I had the chance to meet some extraordinary people today.  Aaron Skinner, Matthew Usher, Mark Hembree, Gerald Voigt, Jeff (firesmacker), John Vojtech, and numerous others.  Sorry if I forgot to mention your name!  I managed two first place awards, and considering the quality of the work on display there, I am most honored. Approve [^]

Frank 

 

  • Member since
    August 2006
  • From: Neenah, WI
Posted by HawkeyeHobbies on Saturday, March 14, 2009 10:54 PM
It was a good show. Would like to have seen the tables full, but the quality level of those on display were great. I'm going to post the pictures I took at the show, not sure where or exactly when but I will get them up.

Gerald "Hawkeye" Voigt

http://hawkeyes-squawkbox.com/

 

 

"Its not the workbench that makes the model, it is the modeler at the workbench."

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Friday, March 13, 2009 7:41 PM
I stopped by this afternoon to register my models, some excellent work there on display already.  It's gonna be an AWESOME show! Tongue [:P]

Frank 

 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Friday, March 13, 2009 7:25 AM
Roger that, hope to see you guys there! Big Smile [:D]

Frank 

 

  • Member since
    August 2006
  • From: Neenah, WI
Posted by HawkeyeHobbies on Thursday, March 12, 2009 7:25 PM
I won't be able to get there now until Saturday...too many loose ends to tie up before I can go out to play. Sigh [sigh] If I had my drothers I would just fly to someplace tropical, warm and away from work. I am tired of winter!

Gerald "Hawkeye" Voigt

http://hawkeyes-squawkbox.com/

 

 

"Its not the workbench that makes the model, it is the modeler at the workbench."

  • Member since
    September 2007
  • From: Crystal Lake, IL
Posted by firesmacker on Thursday, March 12, 2009 5:51 PM

Gotcha Frank,

I can't make it out Friday but I'll be there around 11ish saturday. I'm about 2 hours south and I plan on hitting the road somewhere between 8 and 9. Since it's such a long drive I plan on sticking around for a few hours at least. See you there.

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Wednesday, March 11, 2009 8:16 PM

Jeff-

I am hoping to be there for a bit Friday afternoon, Friday after 7pm, and Saturday after 1pm.  Look for the guy in the dark grey ballcap with "Kesslers Diamonds" on the front. Big Smile [:D]

Frank 

 

  • Member since
    November 2007
  • From: Verona, Wisconsin
Posted by Recon on Wednesday, March 11, 2009 5:46 AM

The weather is supposed to be clear and in the high 30's low 40's. That is what I heard this morning.

Mike

AMPSWI

  • Member since
    September 2007
  • From: Crystal Lake, IL
Posted by firesmacker on Tuesday, March 10, 2009 7:42 PM

I'm pretty stoked. I've been saving my allowance(yes, I'm 41 years old and get an allowance). One last chance to add to the stash before I'm forced to start building the kits I already have. I'm just hoping the weather doesn't get too bad, not looking forward to driving through a blizzard for 2 hours to get there.

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Tuesday, March 10, 2009 5:18 AM
Aaron- I am looking forward to meeting you and Matt on Saturday, see you then! Big Smile [:D]

Frank 

 

Moderator
  • Member since
    April 2006
  • From: my keyboard dreaming of being at the workbench
FSM at Region 5 Convention
Posted by Aaron Skinner on Monday, March 9, 2009 3:07 PM

FSM editor Matt Usher and I will be at the show this Saturday so stop by and say howdy. We'll be at our usual photo booth in the contest room shooting pictures of your models.

See you then.

Cheers,

Aaron

Aaron Skinner

Editor

FineScale Modeler

  • Member since
    August 2006
  • From: Neenah, WI
Posted by HawkeyeHobbies on Tuesday, February 17, 2009 9:03 AM
No clue...I'll find out more from Larry. Not sure it a schedule has been posted to the R5 website yet either.

Gerald "Hawkeye" Voigt

http://hawkeyes-squawkbox.com/

 

 

"Its not the workbench that makes the model, it is the modeler at the workbench."

  • Member since
    September 2007
  • From: Crystal Lake, IL
Posted by firesmacker on Monday, February 16, 2009 5:25 PM

What time is that going to be Gerald? I plan on getting there Saturday around 10. See you there.

Jeff

  • Member since
    August 2006
  • From: Neenah, WI
Posted by HawkeyeHobbies on Monday, February 16, 2009 10:46 AM
I've been asked to participate in a NMF painting seminar with Larry Schramm at the convention. Hope you guys can attend.

Gerald "Hawkeye" Voigt

http://hawkeyes-squawkbox.com/

 

 

"Its not the workbench that makes the model, it is the modeler at the workbench."

  • Member since
    November 2007
  • From: Verona, Wisconsin
Posted by Recon on Sunday, February 15, 2009 5:59 PM

Does anyone coming to the show need or want a Tamiya Paint Rack? I have one that I do not have room for. If your interested send me an email. First one who replies gets it.

Mike

AMPSWI

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Thursday, February 5, 2009 7:27 PM

LOL, thanks for the offer Jeff!

I'm hoping to be able to break away at least for a little while, but only time will tell. Thumbs Up [tup]

 

Frank 

 

  • Member since
    September 2007
  • From: Crystal Lake, IL
Posted by firesmacker on Thursday, February 5, 2009 6:29 PM
 Daywalker wrote:

Not sure if I'll be going now, as I have to work both days.  Too bad really, as I work about 5 blocks away. Disapprove [V]

Frank, I can call in a Bomb-Threat and get you out for a few hours on Saturday.

Wait, is that illegal?

If the FBI ever reads this, my account was hacked and stuff...Whistling [:-^]

think about it... 

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Monday, January 12, 2009 8:33 PM
Wish I could go.  There is never any big shows around here.

 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Monday, January 12, 2009 8:57 AM

Not sure if I'll be going now, as I have to work both days.  Too bad really, as I work about 5 blocks away. Disapprove [V]

Frank 

 

  • Member since
    August 2006
  • From: Neenah, WI
Posted by HawkeyeHobbies on Sunday, January 11, 2009 9:43 PM
There should be a good sized contingency from our club attending...IPMS-Steve Wittman, Oshkosh...which includes me.

Gerald "Hawkeye" Voigt

http://hawkeyes-squawkbox.com/

 

 

"Its not the workbench that makes the model, it is the modeler at the workbench."

  • Member since
    September 2007
  • From: Crystal Lake, IL
Posted by firesmacker on Saturday, January 10, 2009 3:32 PM

The one in Wisonsin? I'm going.

Jeff

  • Member since
    November 2007
  • From: Verona, Wisconsin
Region 5 Convention
Posted by Recon on Saturday, January 10, 2009 2:50 PM

Who is coming to the convention this year?

Mike

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.