SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

This morning at the FSM offices ...

9041 views
36 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2012
  • From: Douglas AZ
Posted by littletimmy on Tuesday, February 5, 2013 11:03 AM

While you guys were trying to hide model kits I found this "well used " coffie cup!   EWWWW !!

 Dont worry about the thumbprint, paint it Rust , and call it "Battle Damage"

  • Member since
    August 2008
Posted by tankerbuilder on Tuesday, February 5, 2013 7:24 AM

YOUSE GUYS , YOUSE GUYS .

I have been watching all this from under the invisibility cloak I borrowed from that nice kid , Hmm Was his name HARRY ? I think we have to light up everything ! Just think of all the nice new nightlights we old folks would have .That would look good in the nursing home hallway on or near the ceiling .Where did I put my walker anyway (nope don't mean SKYWALKER )

Moderator
  • Member since
    April 2006
  • From: my keyboard dreaming of being at the workbench
Posted by Aaron Skinner on Monday, February 4, 2013 4:31 PM

Success! After dropping a Bangalore torpedo over Tim's hastily assembled razor-wire barricade, followed by a couple of flashbangs to stun him, I sprayed the room with paint to reveal the location of the kit. If anybody wants me, I'm in the corner drooling over the 1/6 scale Cylon Centurion.

And Tim: I've booby-trapped the hallway so don't even think about launching a counterattack.

Aaron

Aaron Skinner

Editor

FineScale Modeler

  • Member since
    January 2007
Posted by the doog on Monday, February 4, 2013 12:45 PM

Indifferent..........Crying............Big Smile

lol....

Moderator
  • Member since
    September 2011
Posted by Tim Kidwell on Monday, February 4, 2013 12:34 PM

<unspools razor wire around desk> Hey Karl, sorry but it looks like we've lost that info.

<throws Cohen fractal cloak over boxes> And the kits seemed to have disappeared, too. Never mind the razor wire. It's for research purposes only.

--

Timothy Kidwell
tkidwell@firecrown.com
Editor
Scale Model Brands
Firecrown Media

 

  • Member since
    January 2007
Posted by the doog on Monday, February 4, 2013 12:21 PM

Tim Kidwell

WHOA! Just got two big boxes full of models from Moebius! Gotta look inside! <sneaks away without telling Aaron>

Oh, they forwarded them to the FSM offices? They were destined for my house, Tim; you guys have my address--ask Monica, and just ship them out tomorrow, ok? I'll be watching for them, Wink

Moderator
  • Member since
    September 2011
Posted by Tim Kidwell on Monday, February 4, 2013 11:26 AM

WHOA! Just got two big boxes full of models from Moebius! Gotta look inside! <sneaks away without telling Aaron>

--

Timothy Kidwell
tkidwell@firecrown.com
Editor
Scale Model Brands
Firecrown Media

 

  • Member since
    February 2007
  • From: Brunswick, Ohio
Posted by Buckeye on Wednesday, January 30, 2013 10:55 AM

Indifferent LOL

Moderator
  • Member since
    April 2006
  • From: my keyboard dreaming of being at the workbench
Posted by Aaron Skinner on Wednesday, January 30, 2013 8:43 AM

Tim Kidwell

Aaron and I are shooting a series of new videos about photoetched-metal parts this morning. He gets to play with fire and I get to worry about his playing with fire.

Fire pretty. So pretty.

Aaron Skinner

Editor

FineScale Modeler

Moderator
  • Member since
    September 2011
Posted by Tim Kidwell on Wednesday, January 30, 2013 8:40 AM

Aaron and I are shooting a series of new videos about photoetched-metal parts this morning. He gets to play with fire and I get to worry about his playing with fire.

--

Timothy Kidwell
tkidwell@firecrown.com
Editor
Scale Model Brands
Firecrown Media

 

Moderator
  • Member since
    September 2011
Posted by Tim Kidwell on Wednesday, January 30, 2013 8:39 AM

Phil_H

LOL Tim, No not dissing the "A" That was a quote from Scotty in the TNG episode "Relics" - He's on Holodeck of the Enterprise-D and asks the computer to show him the bridge of "his" Enterprise. The computer replies "There have been five Federation ships with that name. Please specify by registry number." to which Scotty replies N-C-C-1-7-0-1. No bl**dy A - B - C - or D!.

I should have known!

--

Timothy Kidwell
tkidwell@firecrown.com
Editor
Scale Model Brands
Firecrown Media

 

  • Member since
    August 2008
Posted by tankerbuilder on Monday, January 28, 2013 8:13 AM

HI :

I am engaged in a construction project too .My " ENTERPRISE " is not going to have anything lit .I would rather be the one lit after a project like this one and the " SEAVIEW " hmmmmm , coffee's got brandy in it ! Will that help clean the cup ? HE . HE . HE .        Tanker-builder

  • Member since
    August 2005
  • From: Sydney, Australia
Posted by Phil_H on Friday, January 25, 2013 6:04 PM

Aaron Skinner
We are talking about the TOS Enterprise. I'm definitely lighting the Bussard collectors on Polar Lights new kit (using PL's lighting set). The question of canon came up in relation to the vents mounted on the inside edge of the warp nacelles.

Ahh, I see, you're talking about the warp field emitters. Indeed, they were not lit. Smile

Tim Kidwell
My God, Phil. What have you done? You dissed the A.

And Aaron is lighting the Bussard collectors. It's the intercoolers he's crabbing about.

LOL Tim, No not dissing the "A" That was a quote from Scotty in the TNG episode "Relics" - He's on Holodeck of the Enterprise-D and asks the computer to show him the bridge of "his" Enterprise. The computer replies "There have been five Federation ships with that name. Please specify by registry number." to which Scotty replies N-C-C-1-7-0-1. No bl**dy A - B - C - or D!.

PS: The intercooler vents are another thing again - These are on the inside face of the pylons Wink

  • Member since
    March 2004
  • From: Spartanburg, SC
Posted by subfixer on Friday, January 25, 2013 3:20 PM

I'm from the government and I'm here to help.

Moderator
  • Member since
    September 2011
Posted by Tim Kidwell on Friday, January 25, 2013 3:01 PM

<stares into the hypnotic eyes of Doom Kitty>And I'll not take it back, no matter how big your eyes get. Blink, you infernal feline! BLINK!

--

Timothy Kidwell
tkidwell@firecrown.com
Editor
Scale Model Brands
Firecrown Media

 

  • Member since
    July 2010
  • From: Tornado Alley
Posted by Echo139er on Friday, January 25, 2013 2:54 PM

Tim Kidwell

Dammit, Subfixer! I'm an editor, not a scientist!

oooh... you said a bad word.  LOL

Moderator
  • Member since
    September 2011
Posted by Tim Kidwell on Friday, January 25, 2013 8:55 AM

Phil_H

PS: If we're talking about the Enterprise in TOS, (NCC-1701, no bl**dy A,B,C or D), depending on the time period and what shots you look at in the show, she could have had illuminated Bussard collectors. 

My God, Phil. What have you done? You dissed the A. 

And Aaron is lighting the Bussard collectors. It's the intercoolers he's crabbing about.

--

Timothy Kidwell
tkidwell@firecrown.com
Editor
Scale Model Brands
Firecrown Media

 

Moderator
  • Member since
    April 2006
  • From: my keyboard dreaming of being at the workbench
Posted by Aaron Skinner on Friday, January 25, 2013 8:54 AM

stikpusher

Of course the Y-Wing is still my preferred fighter

Stik,
The Y looks cool, but for sheer hitting power, I prefer the B-wing.
Cheers, Aaron

Aaron Skinner

Editor

FineScale Modeler

Moderator
  • Member since
    April 2006
  • From: my keyboard dreaming of being at the workbench
Posted by Aaron Skinner on Friday, January 25, 2013 8:52 AM

Phil_H

PS: If we're talking about the Enterprise in TOS, (NCC-1701, no bl**dy A,B,C or D), depending on the time period and what shots you look at in the show, she could have had illuminated Bussard collectors. Certainly they weren't there at the start, but the 11 foot model was retrofitted with lights in the nacelle caps which rotated by way of a motor and slip-ring system. This can be seen in some episodes. Other shots were done with a 3-foot model which had solid (unlit) nacelle caps, so either can apply.

We are talking about the TOS Enterprise. I'm definitely lighting the Bussard collectors on Polar Lights new kit (using PL's lighting set). The question of canon came up in relation to the vents mounted on the inside edge of the warp nacelles. PL gives you the option to light them because that was originally the plan but was omitted on the filming miniature to save costs. I am not going to light those or the impulse engines, also an option on the model, because I was aiming to be accurate to the 11' model as seen today at the Air and Space Museum.

Cheers, Aaron

Aaron Skinner

Editor

FineScale Modeler

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Friday, January 25, 2013 1:40 AM

I know guys... just stirring the pot....Wink

I did not even mention photon torpedoes or the Romulan's plasma weapon from "Balance of Terror"... Or V'ger's plasma weapon...Hmm

"Propulsion unknown... guidance unknown..."

But the X Wing does carry missiles of a sort... internally...Geeked

Of course the Y-Wing is still my preferred fighter

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

Moderator
  • Member since
    September 2011
Posted by Tim Kidwell on Thursday, January 24, 2013 10:52 PM

Yes, but they're inside the Krupx MG7 torpedo launchers located under the cockpit inside the fuselage with a standard load of three torpedoes each, not slung under the wings. Of course, you can replace the proton torpedoes with concussion missiles, but they don't have the same oomph. Putting missiles under the wing's wouldn't be canon. Besides, the Incom T-65 has plenty of armament on the wings with four Taim & Bak KX9 laser cannons, which are canon, and thus Aaron's point, curse him.

--

Timothy Kidwell
tkidwell@firecrown.com
Editor
Scale Model Brands
Firecrown Media

 

  • Member since
    August 2005
  • From: Sydney, Australia
Posted by Phil_H on Thursday, January 24, 2013 10:45 PM

stikpusher

Tim Kidwell

Tim [rolls eyes]: But it will be cool.

Aaron: It's not canon. That would be like putting missiles on an X-wing.

Tim: Now that's just silly and stupid.

But the proton torpedoes sure behave like missiles instead of a beam type weapon....Hmm at least in the original...

Stik, IIRC, the Proton Torpedoes were carried internally - there are troughs in the lower fuselage sides for the launchers. I think he meant hanging weps under the wings ;)

PS: If we're talking about the Enterprise in TOS, (NCC-1701, no bl**dy A,B,C or D), depending on the time period and what shots you look at in the show, she could have had illuminated Bussard collectors. Certainly they weren't there at the start, but the 11 foot model was retrofitted with lights in the nacelle caps which rotated by way of a motor and slip-ring system. This can be seen in some episodes. Other shots were done with a 3-foot model which had solid (unlit) nacelle caps, so either can apply.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, January 24, 2013 6:29 PM

Tim Kidwell

Tim [rolls eyes]: But it will be cool.

Aaron: It's not canon. That would be like putting missiles on an X-wing.

Tim: Now that's just silly and stupid.

But the proton torpedoes sure behave like missiles instead of a beam type weapon....Hmm at least in the original...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    January 2006
  • From: NW Washington
Posted by dirkpitt77 on Thursday, January 24, 2013 3:50 PM

Tim Kidwell

That's why this thing looks so nasty! <pulls off fake mustache> Serves me right, buying villain accoutrements from the bargain bin at Evil Guys R Us.

  Your maniacal plan to build a droid army of blenders has been foiled!

    "Some say the alien didn't die in the crash.  It survived and drank whiskey and played poker with the locals 'til the Texas Rangers caught wind of it and shot it dead."

Moderator
  • Member since
    April 2006
  • From: my keyboard dreaming of being at the workbench
Posted by Aaron Skinner on Thursday, January 24, 2013 1:40 PM

Gamera

Um, don't emus have feathers instead of hair?

Indeed. And this would be why I'm building the Enterprise (without intercoolers lit), and why Tim isn't.

Cheers, Aaron

Aaron Skinner

Editor

FineScale Modeler

Moderator
  • Member since
    September 2011
Posted by Tim Kidwell on Thursday, January 24, 2013 1:39 PM

Gamera

Um, don't emus have feathers instead of hair?

That's why this thing looks so nasty! <pulls off fake mustache> Serves me right, buying villain accoutrements from the bargain bin at Evil Guys R Us.

--

Timothy Kidwell
tkidwell@firecrown.com
Editor
Scale Model Brands
Firecrown Media

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Thursday, January 24, 2013 1:22 PM

Thanks Gene, saw one at a zoo last fall but I really didn't want to get too close to a critter that could disembowel me with one kick to look too closely...  

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    January 2010
Posted by CrashTestDummy on Thursday, January 24, 2013 1:19 PM

Hair-like feathers, but they look like a wet cat when you apply the mustache wax!  :-)

Gene Beaird,

Pearland, Texas

G. Beaird,

Pearland, Texas

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Thursday, January 24, 2013 1:15 PM

Um, don't emus have feathers instead of hair?

And I think it depends on the situation if the Bussard Collectors light up or not - if you're cruising at Warp 5.1495 on a Thursday they do light up - otherwise no... 

"I dream in fire but work in clay." -Arthur Machen

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.