SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Blast from the not so distant past: 1/72 Matchbox He 115

12203 views
36 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Saturday, August 16, 2014 4:21 PM

That's looking nice. Those decals certainly improved after being left. I need to get one of these as well.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Saturday, August 16, 2014 3:46 PM
haha I hear ya, Jay Jay! I've always been a big seaplane fan, and I hope you have a good time at that IPMS show! My He 115 is ALL complete and ready for action! Hope you guys dig the photos, I'm afraid it looks a bit out of place....a kitchen counter is no place for a seaplane...but as soon as I'm all set working on another project, I'll be working on a diorama for my Heinkel. Thanks to everyone who offered me positive words of encouragement! This was a fun build, and I HIGHLY recommend this kit to anyone. The clear parts required quite a bit of masking, and I think that was honestly the toughest part. So if you end up buying this kit, make sure you spend the money and buy that Eduard die cut masking kit for this plane, you'll be glad you did! You might have to fiddle with the masking kit however, since it is for the "Revell" He-115, not the "Matchbox" one....but the clear parts for the matchbox kit are 99.9% identical to the Revell ones, so you should have very little difficulty! DSCF1484 DSCF1487

4badges

  • Member since
    August 2013
Posted by Jay Jay on Saturday, August 16, 2014 11:10 AM

I can see me coming home from the IPMS show in Orlando with a van full of new kits to build and this is one on my list if Ican find it therre. I love sea planes !

 

 

 

 

 

 I'm finally retired. Now time I got, money I don't.

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Friday, August 15, 2014 8:21 PM
Those decals? Completely laid flat on the surface of the plane overnight! They look fantastic. I sealed them with a clear coat the other day, and tonight I weathered my Heinkel! Here's a few shots: DSCF1481 DSCF1483 I went a bit heavy on the rust colored paint, seeing how this thing would have been landing on a salty ocean most of the time.

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Tuesday, August 12, 2014 7:10 PM
DSCF1480 The decals are on! They didn't give me much of a fight, however they were still kinda tricky. As I type this they're still a little rippled, I think the 20+ year old adhesive was on it's last legs. In fact, I got several big gobs of it on my Heinkel during the whole process! I will put a bit more decal solution on them and take a small pin to whatever bubbles or ripples there are. All in all, they didn't rip or tear, and they look pretty good!

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Tuesday, August 5, 2014 7:53 PM
DSCF1476 I masked off the patterns with Tamiya tape, and applied some RLM 70. It came out pretty good!

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Tuesday, August 5, 2014 7:50 PM

Troublemaker, sorry I  forgot to answer you back! It's Testor's Model Master paint- RLM 65!

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Monday, August 4, 2014 9:32 PM
DSCF1475 Hey everybody! Got back from a reenactment yesterday, and today I got back to working on my Heinkel! Before I left for the weekend I painted the underside with fresh RLM 65 from a new jar I bought at the local hobby store. And while at the store, temptation consumed me, and I picked up yet another kit to add to my stash! But hey, everyone needs a Fokker D VII at some point! Tonight I was able to put on the first coat of RLM 71 - and it came out pretty good. I'll start masking it off for the camouflage tomorrow or the next day.

4badges

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, July 28, 2014 5:05 AM

Rocker, no, I have no idea why matchbox did these multi coloured kits. maybe they thought it appealed to kids. Good choice on the Eduard masks.

I have had issues with fining paint dried up, and i can't point a finger at a reason for it. Sometimes its paint that's had thinner added, sometime it hasn't. Its happened to tinned enamels and acrylic in jars. I think the main factor is how secure the lid is on.

Troublemaker, i have been able to revive a dried up tin of paint on occasion, so i know it can be done.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    July 2007
  • From: Southern New Jersey
Posted by troublemaker66 on Monday, July 28, 2014 4:52 AM

What type of paint is it? Some people on theses forums would highly disagree with me but, I have reconstituted many a bottle of dried up paint and had absolutely no trouble at all. With Tamiya paints, I use 99% alcohol to get it nice and thin. On enamels, I use laquer thinner and them I pour the paint through a strainer to get any clumps out. At almost $4 for 1.5 oz. (Model Master), it`s worth the trouble to me anyway.

Len Pytlewski

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Sunday, July 27, 2014 7:58 PM

I don't have a photo to share, but I primed my Heinkel early this morning, and by mid afternoon the primer was dry. So I went downstairs to start painting...only to find my bottle of RLM 65 alllll dried up. I don't know how it happened, but in any case, I'll be hitting the hobby store tomorrow!

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Wednesday, July 23, 2014 10:31 PM
DSCF1473 Gotta love pre-cut masks! The greenhouse and the nose are all masked off, and I've painted the frames with RLM 66. Tomorrow afternoon I shall put some primer on this bird!

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Sunday, July 20, 2014 6:49 PM
Well folks, construction on the Heinkel is all set! Now comes the fun part...masking it off and getting it prepped for paint! DSCF1471

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Sunday, July 20, 2014 6:47 PM

Bish I don't envy me either! Luckily I've purchased an Eduard mask for this kit, so it won't be as demanding (or cruel and unusual!). This kit was the first I've ever built where each sprue was molded in a different color plastic, I'm not sure why they did this back in the day, but it won't matter once I spray some primer on it. I'm definitely thinking of going with a green scheme, I've seen some models done up in a gray scheme, but I like the way the green looks better :)

Troublemaker, sorry to hear about that Ki-45! :( Did you end up building another one?

4badges

  • Member since
    July 2007
  • From: Southern New Jersey
Posted by troublemaker66 on Sunday, July 20, 2014 2:30 PM

rocker286
DSCF1440Haha thanks troublemaker! I dig your profile photo- is that a Ki-46? I just picked up a Hasegawa one a few weeks ago. Here's a shot of the nose section- the two halves of the nose were a bit tricky to put on, so I placed the fuselage between the jaws of a large pair of hemostat tweezers on a mount and glued the clear parts on with the body of the aircraft standing upright. It worked and nothing fell off!

You`re close Rocker...it`s a Ki-45 Toryu, sadly sunk in Hurricane Sandy...lol.

Len Pytlewski

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Saturday, July 19, 2014 5:14 PM

Looking good there rocker. I would say it would be nice to see some green on here, but seems its already in 70/71 colours. I don't envy you masking that canopy.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Saturday, July 19, 2014 4:49 PM
DSCF1463 Floats are on!

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Thursday, July 17, 2014 9:27 PM
Got a little bit of time to myself this evening to work on the 115. All the clear plastic is cemented on, it's looking pretty good! DSCF1462

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Sunday, July 13, 2014 6:25 PM
DSCF1458 Thanks for the kind words everyone! This build is going together quite easily. As I type this, the cement on the portside wing is drying. The floats are all set, I'll just have to attach the nose cone and MG to the front of the aircraft, and attach a few small pieces and structurally, the plane will be complete!

4badges

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Tuesday, July 1, 2014 7:16 AM

I can count my shelf queens on 1 hand.  This is one.  i was not up tot he task at the time.  So I will be living vicariously through your build.  Nice work

Marc  

  • Member since
    February 2006
  • From: Smithers, BC, Canada
Posted by ruddratt on Sunday, June 29, 2014 2:25 AM

Man, I love this plane!  Not as much into the WWII birds as I used to be, but this one is something special. I'll be watching closely.  Yes

Mike

 "We have our own ammunition. It's filled with paint. When we fire it, it makes pretty pictures....scares the hell outta people."

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Sunday, June 29, 2014 1:43 AM

Lots of nice canopy to mask on this one. Looking good.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    October 2004
  • From: Northern Virginia
Posted by ygmodeler4 on Saturday, June 28, 2014 10:25 PM

Looking good so far!

-Josiah

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Saturday, June 28, 2014 8:52 PM
DSCF1441 The float halves have been glued together and in the morning they'll be dry.

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Saturday, June 28, 2014 8:50 PM
DSCF1440 Haha thanks troublemaker! I dig your profile photo- is that a Ki-46? I just picked up a Hasegawa one a few weeks ago. Here's a shot of the nose section- the two halves of the nose were a bit tricky to put on, so I placed the fuselage between the jaws of a large pair of hemostat tweezers on a mount and glued the clear parts on with the body of the aircraft standing upright. It worked and nothing fell off!

4badges

  • Member since
    July 2007
  • From: Southern New Jersey
Posted by troublemaker66 on Monday, June 16, 2014 1:23 PM
I have the same kit but it's packed away in a storage unit. .still rebuilding from hurricane Sandy and haven't been able to do much building. ..hope to be back at my bench in a month or so. Your build is looking great and I will be lurking. ..lol

Len Pytlewski

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, June 16, 2014 11:48 AM

USMC, I know what you mean, I built their Chinook a couple of years back and I am glad Revell have kep[t there kits going.

Looking good there rocker.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Sunday, June 15, 2014 10:08 PM
DSCF1438 Put together one of the wings. The fit was perfect, too soon to tell if I'll need any filler but so far, so good!

4badges

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Sunday, June 15, 2014 10:07 PM
DSCF1437 coated the clear parts in Future.

4badges

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.