SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Not as seemingly seamless as it seems

1380 views
17 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2015
  • From: providence ,r.i.
Not as seemingly seamless as it seems
Posted by templar1099 on Friday, February 12, 2016 4:38 PM

This is my first subject specific forum I've posted to. This is my personally favorite aircraft, the A-10. I was always under the impression that the impetus for the development of a new ( at the time ) generation close ground support aircraft was predicated on the need to counter-balance the armored divisions of the Warsaw Pact pouring through, the Fulda Gap, say, and hold until reinforcements arrive. What little research I did for this neither confirmed nor dispelled my belief. Anyhow this is Revlell' s 1:48 model. I got a bad kit. The plastic;rubbery, 3 of the sprues' injection molding were molded deep enough to be integral parts of the pieces attached to them, one side of fuselage and its corresponding parts had all the raised details doubled in number and in height, its opposite side and parts were barely visible. I used a lot of perfect putty, had to mickey mouse the cockpit to fit,all the contact points were off and that antenna on the wing... . Known self inflicted errors were the nose decal, the canopy,and boarding ladder, and I'm less than thrilled with the wheels, don't know how you guys do it. This was my first time I tried free hand airbrushing a camo thus the wide pattern. In fact other than most of the cockpit it was all air, including the smallest touch ups. Also used Mr. Surfacer for priming considering the state it was in and I liked it. Other special tools included: a Harley hammer,Sawz-all, and arc welder. Thanks.


     photo DSC03768_zpsexsli90w.jpg


 photo DSC03771_zpsnzjhfvel.jpg


 photo DSC03828_zpsntt6kuce.jpg

"le plaisir delicieux et toujours nouveau d'une occupation inutile"

  • Member since
    September 2012
Posted by GMorrison on Friday, February 12, 2016 4:45 PM

I think it's a very nice model of a bad kit. I picked one up once a really long time ago at a hobby shop GOB sale, and ended up throwing it away half done.

Since it's your favorite a/c, I'm sure the Hasegawa one is a whole lot better.

 Modeling is an excuse to buy books.

 

  • Member since
    December 2015
  • From: providence ,r.i.
Posted by templar1099 on Friday, February 12, 2016 5:58 PM

Thanks G, I just opened a Hasegawa Zero and am looking foward to it. Yea the A-10 was a bargin and for practice.

"le plaisir delicieux et toujours nouveau d'une occupation inutile"

  • Member since
    September 2012
Posted by GMorrison on Friday, February 12, 2016 6:48 PM

And....Hasegawa doesn't make an A-10. I don't know why I thought that. Maybe once upon a time.

 

The HobbyBoss kit seems to get really positive reviews.

 Modeling is an excuse to buy books.

 

  • Member since
    July 2007
Posted by scorpr2 on Friday, February 12, 2016 8:28 PM

I think you did a good job on it, especially with all of the problems you had with it.  I like the camo paint job.  Keep up the good work.

  • Member since
    December 2015
  • From: providence ,r.i.
Posted by templar1099 on Friday, February 12, 2016 8:51 PM

Thank you Scorp.

"le plaisir delicieux et toujours nouveau d'une occupation inutile"

  • Member since
    August 2013
Posted by Jay Jay on Saturday, February 13, 2016 10:36 AM

Nice job on this less-than-perfect kit. I admire your fortitude on sticking with it to the finish.

 

 

 

 

 

 I'm finally retired. Now time I got, money I don't.

  • Member since
    December 2015
  • From: providence ,r.i.
Posted by templar1099 on Saturday, February 13, 2016 10:45 AM

Thanks JJ, gotta look at it for what it was, a learning experience, everything I tried to do on this came from these forums.

"le plaisir delicieux et toujours nouveau d'une occupation inutile"

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Saturday, February 13, 2016 1:15 PM

Despite the issues and concerns, you did a fantastic job on this build!

Toshi

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    December 2015
  • From: providence ,r.i.
Posted by templar1099 on Saturday, February 13, 2016 2:02 PM

Considering the source that's quite a compliment, thanks Tosh.

"le plaisir delicieux et toujours nouveau d'une occupation inutile"

  • Member since
    February 2016
Posted by Slingshot on Monday, February 15, 2016 7:52 AM

I feel your pain.

You did a great job. It's gratifying to turn a &$#@ kit into something decent...I too bought an A-10 kit that was beyond terrible to build.

final result was ok, but like you - so much customization/putty/extra work to get it to look somewhat close to what it's supposed to.

I'm now contemplating the Trumpeter 1:32 version with all the fancy upgrade bits for it.....

 

I'm partial to these aircraft as I spent a week overseas working with them.

 

  • Member since
    June 2003
  • From: Cavite, Philippines
Posted by allan on Monday, February 15, 2016 7:41 PM

Came out a beauty, assembly, painting and all. Nice build!

No bucks, no Buck Rogers

  • Member since
    December 2015
  • From: providence ,r.i.
Posted by templar1099 on Wednesday, February 17, 2016 6:30 AM

Slingshot
feel your pain. You did a great job. It's gratifying to turn a &$#@ kit into something decent...I too bought an A-10 kit that was beyond terrible to build. final result was ok, but like you - so much customization/putty/extra work to get it to look somewhat close to what it's supposed to.


Improvise,adapt,overcome. Everything will be put to use on subsequent builds. Thanks for the comment and back at you on yours. I really like the standrad gray clean look but wanted to experiment with freehand air. Is that you earning a paycheck wing side ? Lucky you. Hard to believe that at one point there was a debate as to replacing these monsters.

"le plaisir delicieux et toujours nouveau d'une occupation inutile"

  • Member since
    December 2015
  • From: providence ,r.i.
Posted by templar1099 on Wednesday, February 17, 2016 6:31 AM

allan

Came out a beauty, assembly, painting and all. Nice build!

 


Thanks Allan. I surprised myself.

"le plaisir delicieux et toujours nouveau d'une occupation inutile"

  • Member since
    February 2003
Posted by Jim Barton on Wednesday, February 17, 2016 11:50 AM

Great build, especially with a poor-quality kit! 

I've always liked the Warthog and definitely glad they decided not to retire it! 

"Whaddya mean 'Who's flying the plane?!' Nobody's flying the plane!"

  • Member since
    December 2015
  • From: providence ,r.i.
Posted by templar1099 on Wednesday, February 17, 2016 12:42 PM

Jim Barton
Great build, especially with a poor-quality kit! I've always liked the Warthog and definitely glad they decided not to retire it!


Amen.

"le plaisir delicieux et toujours nouveau d'une occupation inutile"

  • Member since
    February 2012
  • From: Olmsted Township, Ohio
Posted by lawdog114 on Friday, February 19, 2016 2:33 AM
Its not you...its the kit. Absolutely brutal fit-wise and an exercise in patience. One of the first kits I build when I returned and I almost quit again. That said, you did a beautiful job on it.

 "Can you fly this plane and land it?...Surely you can't be serious....I am serious, and don't call me Shirley"

 

 

 

 

  • Member since
    December 2015
  • From: providence ,r.i.
Posted by templar1099 on Friday, February 19, 2016 5:34 AM

Thanks Lawdog, sometimes it's hard to tell the difference between kit and self-inflicted.

"le plaisir delicieux et toujours nouveau d'une occupation inutile"

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.