SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

M26 Pershing...DONE!!!, lots of pic's

10626 views
44 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2007
  • From: Schroon Lake, NY
M26 Pershing...DONE!!!, lots of pic's
Posted by SMJmodeler on Monday, November 30, 2009 9:45 AM

Guys:  I had a productive holiday weekend!  I started the Pershing Thanksgiving morning and by Saturday night I got her this far:

As you guys said this baby goes together great!  The only hang-up were the side skirts...I put them on then had a heck of a time getting the sprockets over the axle.  Thankfully I kept them in halves or I would have had a REAL problem.  

I painted her standard issue olive drab then post-shaded it with two shades of OD lightened with yellow-green.  I really like the effect..the olive-tones are very sharp!  The lighter shades will also help offset the darkening effect of the washes (still to come).

The suspension on this baby is killer, it moves just like the real thing!  The only problem, as you can see in the pic's, is that it won't stay flat...the back end keeps poppin' up. No problem to fix/adjust though, AND I had intended to show the working suspension by having it going over a fallen tree. 

I'm sure glad to be back at the bench and posting my stufff again!

 

  • Member since
    March 2003
  • From: Rain USA, Vancouver WA
Posted by tigerman on Monday, November 30, 2009 10:17 AM
I like the different tones Stephen. Welcome back!

   http://i7.photobucket.com/albums/y269/wing_nut_5o/PANZERJAGERGB.jpg

 Eric 

  • Member since
    February 2003
  • From: A Spartan in the Wolverine State
Posted by rjkplasticmod on Monday, November 30, 2009 10:20 AM

The shading came out great.  Well done!

Regards,  Rick

RICK At My Age, I've Seen It All, Done It All, But I Don't Remember It All...
  • Member since
    May 2004
  • From: Kings Mountain, NC
Posted by modelbuilder on Monday, November 30, 2009 10:36 AM
Is there a tutorial out there for post shading? I see many of you guys use it. would like to give it a try myself

  • Member since
    May 2008
  • From: Budd Lake, New Jersey
Posted by BeltFed on Monday, November 30, 2009 2:10 PM
What kit did you Use?  Makes me wanna build another Pershing....
  • Member since
    October 2007
  • From: N.H.
Posted by panzerguy on Monday, November 30, 2009 4:19 PM

 You got this far in three daysShock [:O]! I would say the funk is over buddy!

 Nice job on the post shading. Looking forward to seeing the signature SMJ weathering on this guy.

"Happiness is a belt fed weapon"

  • Member since
    January 2007
Posted by the doog on Monday, November 30, 2009 6:39 PM

Nice work, Steve! Goood to see that you're over your funk!

This is a really nice kit--I built it about two years ago.

  • Member since
    July 2006
  • From: New Jersey
Posted by redleg12 on Monday, November 30, 2009 8:42 PM

What funk!!!

Hey, nice work, hope you took some time out for turkey!!.

Beeeeee careful with OD and washes. You are a little dark now....don't go much darker. Shading looks good but beeeeee careful.

For US WWII/Korean OD base I use PolyScale OD 505370 and use a 80/20 blend of Tamiya OD and YellowGreen for the dark shades. Then you are light enough for dots followed by a MIG wash.

Rounds Complete!!

"The Moral High Ground....A Great Place to Emplace Artillery."

  • Member since
    September 2009
  • From: Rugby, England
Posted by Hinksy on Tuesday, December 1, 2009 6:08 AM

Lovely job so far!

I built the very same one and, like you say, it just assembled itself-all I had to do was add the cement.

I sat a nice block of lead held (not overly heavy) in place with velcro stick on bases inside the tank base before fitting the top half of the hull-it really makes the torsion bars sit down nicely.

Here's mine-she's brush painted as I don't own an AB yet. For my third ever build I was chuffed to bits with her. Oout of all my builds she's my definate favourite so far..............

Keep us posted on the WIP.............

ATVB

Ben Smile [:)]

On the Bench - Dragon Pz. IV Ausf. G (L.A.H.) Yes

Your image is loading...

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Tuesday, December 1, 2009 12:22 PM

Nothing like a well-engineered kit to get the juices flowing again.

Looks great, Steve. 

Apprentice rivet counter.

  • Member since
    July 2004
  • From: Texas
Posted by wbill76 on Tuesday, December 1, 2009 5:06 PM
Looks like a very productive 3 days Steve! Nice work on this one so far. Thumbs Up [tup]
  • Member since
    April 2007
  • From: Schroon Lake, NY
Posted by SMJmodeler on Friday, December 4, 2009 10:47 AM

tigerman/rjkplasticmod/panzerguy/doog/Rbaer/wbill76:  Thanks for the comments and encouragement!

modelbuilder: I'm not sure if a post-shading tutorial is out there...I would think so though.  Go check it out and let me know.  If not one is definately needed!

BeltFed:  This is the Tamiya Kit.

redleg12: I'm with you on being careful not to darken this one too much...I will proceed with that in mind.  Thanks for watchin' my backThumbs Up [tup].

Hinksy: Nice Pershing..and that's w/o and AB...not badThumbs Up [tup]!

  • Member since
    April 2007
  • From: Schroon Lake, NY
Posted by SMJmodeler on Friday, December 11, 2009 11:20 AM

Guys:  Here's some current pic's. These were taken after oil washes of raw umber, burnt umber, permanent green and lemon yellow.  They were VERY diluted but I think they gave it a nice look.  I also added a pin wash to the details.    I'm sure enjoying this change of pace American thing!

  • Member since
    September 2009
  • From: Rugby, England
Posted by Hinksy on Friday, December 11, 2009 12:17 PM

Oooh yeah,

She is looking great-keep it up!

One tip: If I were you I'd remove the .50cal MG mount while you are working in on her. I didn't and it took the lightest of knocks and the tiny stub that pushes into the hole snapped off in the hole-it's VERY brittle.

Obviously I managed to fix it but it wasn't easy! A Pershing isn't  a Pershing without the .50 cal!

HTH

Ben Cool

 

On the Bench - Dragon Pz. IV Ausf. G (L.A.H.) Yes

Your image is loading...

 

  • Member since
    July 2004
  • From: Texas
Posted by wbill76 on Friday, December 11, 2009 12:33 PM

Coming along nicely Steve, good to see this one progressing with your usual method of tone variation. Yes

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Friday, December 11, 2009 3:48 PM

I'm likin' it a lot.Yes

Apprentice rivet counter.

  • Member since
    April 2007
  • From: Schroon Lake, NY
Posted by SMJmodeler on Thursday, December 17, 2009 4:10 PM

Hinksy: I'm working VERY cautiously around ALL the turret add-ons...I have to, they are all glued on, including the MG!

wbill76: Thanks Bill...the tonal variation will be VERY apparent when I post the next pictures...I'm liking how this one is coming along...OD can be made interesting with a little effort.

Rbaer: Thanks man!

  • Member since
    May 2005
  • From: Dublin Rep Of Ireland
Posted by terry35 on Friday, December 18, 2009 8:02 PM

Steve I would normally not click into an Allied build, but this time I'm glad that I did, AMAZING WORK AND PROGRESS. Truely looks great.

Terry.

  • Member since
    April 2007
  • From: Schroon Lake, NY
Posted by SMJmodeler on Tuesday, December 22, 2009 10:17 PM

terry35:  I'm glad you came by to take a look..and thanks.   I'm nearing completion and hope to get some more pictures up soon...it looks A LOT different!  Much more weathering...but I think I restrained myself enough to make it unique but not overdone.

  • Member since
    July 2006
  • From: New Jersey
Posted by redleg12 on Wednesday, December 23, 2009 5:21 AM

Steve - LOOOKING Good. Nice wash work. Coming along very well.

Rounds Complete!!

"The Moral High Ground....A Great Place to Emplace Artillery."

  • Member since
    April 2007
  • From: Schroon Lake, NY
Posted by SMJmodeler on Wednesday, February 10, 2010 10:33 AM

Guys: After quite a build funk and a bittersweet holiday season I finally got something completed at the workbench! 

This is my Tamiya M26 Pershing.  It was a great kit and a real fun build for me!  I've been wanting to depict a tank in my "yard" using my persoanl home property as a setting.  So here's a picture out my front door to give you the look I was going for as the base: 

I gathered up leaves, sticks and a rock to make it authentic.  I crumpled-up the leaves to get them to the right size and I used tamiya flat base on a few sticks of the sticks to get the Birch tree bark look. 

I envisioned the tank as being a late WWII vet, seeing a bit of action, then re-used in the Korean War..hence the sunbleached finish and rust.  She is OOB except for the netting and rope.

So without further ado here is how it all came out!:

Thanks for looking!

 

 

 

  • Member since
    April 2009
  • From: Carmel, IN
Posted by deafpanzer on Wednesday, February 10, 2010 11:45 AM

WOW!  I really like your diomara.Yes Did you use real leaves?  It just looked too real... cutting old leaves into smaller pieces or something like that?  If so, never thought about this before since I have PLENTY of trees and leaves in the yard.   

Andy

  • Member since
    April 2007
  • From: Schroon Lake, NY
Posted by SMJmodeler on Wednesday, February 10, 2010 12:58 PM

deafpanzer: Those are INDEED real leaves!  I happened to find a bunch of dry ones in some protected corners around my house.  I crumpled them by hand to get them to correct scale...or so.  It was very easy, except I used a lot of watered down glue to get them to stay put.

  • Member since
    July 2004
  • From: Texas
Posted by wbill76 on Wednesday, February 10, 2010 1:20 PM

Nice work on this one Steve, glad to hear you were able to get back to this project and get it finished. Beer

  • Member since
    October 2009
  • From: South Carolina
Posted by jetmodeler on Wednesday, February 10, 2010 3:22 PM

Nice job. I like the netting. What did you use for it?

 

  • Member since
    May 2005
  • From: Dublin Rep Of Ireland
Posted by terry35 on Wednesday, February 10, 2010 6:16 PM

Steve excellent work it looks super, the netted barrel looks like the tank is acting as a sniper, really cool,

Terry.

  • Member since
    December 2007
  • From: Bridgeview, Illinois
Posted by mg.mikael on Wednesday, February 10, 2010 7:36 PM

Now that is one beauty of a Pershing, SMJ!!Bow Down Seriously the weathering is superb, and the base is stunning as well. Overall I love the look of the tank on that base, right next to some birch trees.

 

"A good plan executed now is better than a perfect plan next week." - George S. Patton

  Photobucket 

  • Member since
    July 2006
  • From: New Jersey
Posted by redleg12 on Wednesday, February 10, 2010 8:28 PM

Steve - very nice work. The netting is a nice touch. Glad to see you back in the saddle. Nice job with the leaves

Rounds Complete!!

"The Moral High Ground....A Great Place to Emplace Artillery."

  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in central North Carolina.
Posted by disastermaster on Wednesday, February 10, 2010 8:38 PM

Good job overall Steve. Love those trees.

Seems that everything ties together very nicely here.

http://www.innovationbyinstinct.com/services/hosting/clients/accountyp/status/DisasterMaster/%23t1-4.jpg

 https://i.imgur.com/LjRRaV1.png

 

 

 
  • Member since
    July 2003
  • From: Toronto, Ontario, Canada
Posted by zokissima on Wednesday, February 10, 2010 9:52 PM

Wow, fantastic work on this one.

 

Aside from the tank, I think you got a sweet look with those birch trees Smile

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.