SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

removeing crome

676 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2009
removeing crome
Posted by 63 impala on Tuesday, August 11, 2009 9:27 AM
i am trying to remove the crome off some die cast parts so i can paint them any ideas
  • Member since
    June 2008
Posted by lewbud on Tuesday, August 11, 2009 11:33 AM
Are the parts metal or plastic?  Don't know what to tell you if they're metal.  If they're plastic, you can dunk them in bleach and that usually removes the chrome, but leaves the clear lacquer undercoat.  If you want to get down to bare plastic, go to your local walmart or auto parts place and get you some Super Clean.  Dunk it in the purple lake for a while and you should be good to go.  Rinse well, let dry and then primer.  Welcome to the Forums.  What are you building?

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Tuesday, August 11, 2009 11:45 AM

Oven cleaner will also remove the chrome, down to the bare plastic.

The active ingredient is lye, which is caustic to skin and other tissue, so it's a good idea to use it in a well-ventilated area, or outside, weather permitting, and to use gloves, like household cleaning gloves, to handle the parts while they're covered.

I use an old glass baking dish, place the items to be cleaned in the dish, and spray on the oven cleaner until the parts are covered.  Wait a couple of minutes, and then take an old toothbrush and scrub away the foam and gunk.  Rinse the parts with water, and repeat as necessary.  It doesn't take too long for it to remove the thin layer of chrome plating.

Hope that helps!

Brad

The bigger the government, the smaller the citizen.

 

 

  • Member since
    March 2009
  • From: Saint Marys, OH
Posted by Ivawoody on Friday, August 14, 2009 12:21 PM
I use Westley Bleach White like you would use on your white wall tires. Takes the chrome plating right off in about 10-15 minutes and doesnt leave any sticky residue My 2 cents [2c]
-Woody Follow my Viper RT/10 build here: http://cs.finescale.com/forums/1107466/ShowPost.aspx See my Huey project here: http://cs.finescale.com/forums/1105968/ShowPost.aspx
  • Member since
    January 2007
Posted by the doog on Saturday, August 15, 2009 9:38 AM
Regular Clorox bleach takes it off in about 10 minutes too.
  • Member since
    July 2009
  • From: North Carolina
Posted by Back to the bench on Sunday, August 16, 2009 1:47 PM
I have not tried it but I have also heard several people recommend brake fluid.

Gil

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.