US WWII hull red

mfsob

I think it's out of production, but I use Floquil Railroad Colors Boxcar Red, no. F110074. Not too much brown, and not a ghastly bright red either. When you build ion 1/700, a bottle of this goes a longgggg way.

 

Yes, Floquil paints have gone the way of the Dodo, along with Polly Scale and Model Master. All of those Testors owned specialty paint lines are discontinued, out of production, and extinct. Any of those paints that you may find available are the remaining old stock.

I think it's out of production, but I use Floquil Railroad Colors Boxcar Red, no. F110074. Not too much brown, and not a ghastly bright red either. When you build ion 1/700, a bottle of this goes a longgggg way.

These guys are outstanding for all accurate US Navy paint codes.

https://trucolorpaint.com/military-ships/

I was thinking of Maritime Commission service.

Bill

GMorrison

And despite the comic pages, the decks on civilian Libertys are the same color as the verticals.

Often, the only thing consistent about merchies is their inconsistency.

Another one I like is the Ace Hardware spraycan version of actual Rustoleum primer. It's got more red, less Tuscan brown than rustoleum.

Bill

rocketman2000

Testors used to have a British Crimson that was a good color for seagoing bottoms, but I have not seen it in ages. 

For freshwater hulls I usually use red oxide primer, which is widely available.

 

Yes, that was in their Model Master II line of colors. It's now OOP.

Testors used to have a British Crimson that was a good color for seagoing bottoms, but I have not seen it in ages. 

For freshwater hulls I usually use red oxide primer, which is widely available.

Surprised to find my Mission paint order in the mail today.  Just ordered it Tuesday afternoon.

Pretty good service from Spray Gunner and the USPS.

Thanks for the heads up.  I'll stick with mission thinner.

GM - NOT going to be building any 1/350 Shermans. 

goldhammer88

Thanks stik, I'll order some.

Edit....on the way, along with their thinner, just incase Testors acrylic thinner isn't compatible.

 

They are absoluty not compatable. That's my only beef I have with Mission. Thin with their thinner and clean the AB with watter. Anything else will break up the paint and you'll have paint chips and specks to clog your brush. I have found that Vallejo thinner works ok. I love Mission other than that. It's just not compatable with other acrylics.

Included in the Vallejo Nuclear Submarine paint set (71.611) is the Model Air Fire Red (71.084), slightly oranger than rusty primer red.  I also like Reaper MSP 9242 Carrot Top Red.

Reaper's Rust Brown (9072) is a bit redder, Auburn Shadow (9241) is a bit browner

No boot.

And no Sherman tanks on the hatch covers!

Bill

Thanks.  Took a look, and will keep in mind for future, but not big on enamels, shot too much of it as a painter in the auto body industry.

I used True North anti-fouling paint of my stalled Titanic buiild.   Nice paint and lots of naval paint - maybe take a look

https://www.truenorthpaints.com/paintstore

Thanks GM.  That's what I've gleaned from an old thread from somewhere that one of the crew of the O'Brien chimed in on.  Also said the color split was at the 10' line, and no boot. He added the top of the stack and upper mast were black.

Going to prime anyway as I had to sand the seam between upper and lower hulls.

Got several bottles of MM 5-O.

Well the thing is that Liberty ships were not Navy ships and were built in various civilian yards all over the country.

Their paint colors didn't really follow any uniform standard, topside Gray being the prime example. 5-O is pretty close usually, but any kind of red oxide on the bottom works.

Also the Trumpeter top bottom split is a little high up the sides.

And despite the comic pages, the decks on civilian Libertys are the same color as the verticals.

Bill

Wouldn't surprise me.  I try to stick with maker's recommendation..... I have enough problems already.

But can mix a few drops in a cup and see what happens.

goldhammer88

Thanks stik, I'll order some.

Edit....on the way, along with their thinner, just incase Testors acrylic thinner isn't compatible.

 

I don't believe that the two types work together. One of the many "joys" of acrylics... incompatible formulas and thinners.

Thanks stik, I'll order some.

Edit....on the way, along with their thinner, just incase Testors acrylic thinner isn't compatible.

Mission Models MMP-111, Anti Fouling Hull Red Norfolk 65A