SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

To all Filipino Modelers

151429 views
2189 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 1:30 PM
QUOTE: Originally posted by sigman

Ben,

I just working on an academy mig21 and P40 since i hate doing decals. just bought micro set/sol and am not sure how to apply or use it. any tips?

I'm proceeding with a star wars droid fighter since it has no decals but i'm scratchbuilding some parts on it to have it a real copy with the red interior lights.


Sigman,

I saw your thread down at 'decaling'. The tips that the other mebers posted about using Micro sol i think were pretty good.
  • Member since
    December 2003
Posted by jepot on Thursday, June 3, 2004 3:49 PM
QUOTE: Originally posted by smvillalon

QUOTE: Originally posted by jepot

QUOTE: Originally posted by smvillalon

QUOTE: Originally posted by jepot

Shonen- wanna borrow a BDA i used in the field? Sorry can't lend you my pop gun; its kinda " reserved" for offcial use only.
Buck- im back, i think...
IPMS BAC folks- finally, the outposts are manned, with detachments posted beyond! Relieved in place na ako...
Fellow FIlipino modellers- just enjoy the hobby, and be honest with yourselves and your fellow Filipino modellers
smvillalon- remember me?do hope so...
noel_carpio - you also remember me? do hope so too....



Good to see you back on the board. Did you have an entry in the BAC Cup? I hear great things about it. Smile [:)] I'm glad it was a success. It'll bring in more modelers to the fold.

Jun


Jun, thank you for the welcome. I appreciate itWink [;)]; and thank you for the portly fine email you sent me; that i appreciate too; no i couldnt have any entries to the last BAC contest; i was in thailand literally waving the Philippine flag infront of the Thai, US, SIngaporean, and Mongolian soldiers, who we had an exercise with. Nice BDAS these guys had.
Big Man: Yes Master.... im back Master...what are your instructions Master?Approve [^]
Mischief [:-,]


Oh well, there's always the next competiton.

Are you preparing for the Nationals na? That's a really big event. I remember the last National competion. It was a pity only a few entries came from the far provinces. But it was really fun. I'm sure the next will be even better.

Jun


Jun,
hopefully i could build a kit or even hust rehabilitate an old, depending on my schedule and workload- the nature of my work and its collateral duties makes scale modelling a rather elusive pasttime nowadays for me.
Ben- thank you for the welcome note
  • Member since
    December 2003
Posted by jepot on Thursday, June 3, 2004 4:01 PM
Buck- salamat sa pagbati; its been a long time since we were just the 2 outpost guards here; continue Kagitingan; for my contribution, we have the ship plans of PN and PCG ships which jr also has copies of
Adolf is that you? Hey, a lot of old hands are looking for you, as in they had been trying to get in touch with you; the late Bert for sure was one of them, but i guess now it 'll be up to his heirs; just dunno why; what gives pal?
  • Member since
    July 2003
  • From: Philippines
Posted by Dwight Ta-ala on Thursday, June 3, 2004 6:44 PM
Allan: Thanks.

Shrikes: Don't worry I am planning a diorama with a plane in it soon. Anyway, I am really expecting great entries from others since it is going to be the main model comp being the nationals. Moreover, I have great respect for the IPMS guys. I know that they are among the best of the best out there as far as plastic modeling is concerned. Parang nakakahiya pagnagsubmit ng entry na basta-basta lang. I will try to build something better and I hope I can finish it in time for the competition.

BTW, here is one diorama I just did which is also aircraft related.

http://geocities.com/ddta_ala/d5.htm

He-he-he. Biro lang anti-aircraft pala.

  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 7:41 PM
Hi Sigman,

I am using Mr. Mark softer/setter, but the procedure were the same. Once your decal is ready for the transfer, wet the spot on the model where the decal will be place with a drop or two of the softener ,move or adjust your decal and then dab the decal with the setter.

Ben Borja
  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 7:51 PM
Good Morning Sigman, Mike J

Mike J, i found out last night that Rape of Manila (PG13) actually happened during1700 or 1800 wherein the Her Royal (English) Majesties armada captured Manila Bay and occupied Manila and nearby towns for almost a year until Spanish reinforcement came and drive them off.

Ben Borja
  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 7:54 PM
QUOTE: Originally posted by smvillalon

QUOTE: Originally posted by Mike J

QUOTE: Originally posted by Ben Borja

LordT, how's the little baby girl, were you able to repair the two shermans that you on
the floor , pare ko sci-fi fan din ako, have ten gundam "endless waltz" series,
W-gundam zero customs,.

Have been reviewing my FSM Mags collections (from 2000-2004) will prepare
photocopies of weathering techniques for desimination to our new members.

Mike J can we grant off-site membership to davao and zamboanga?

Noel - Tuloy ba yung group build na Rape of Manila (PG 13)?


Welcome to the Forum , Jepot

Ben Borja


We can give offsite membership to anybody as long as it is within the framework of our by-laws. Reggie will become an offsite member when he settles down out there. Iknow someone in Davao who may want to be a member of our group, unless he opts to join Benhur. I gave him benhur's email address for him to write to.

BTW,
I wasn't able to try the table salt technique, too tired after watching Harry Potter 3 last night. Will try again tonight.

I think Lord T's Shermans that flew off the stairs are actually test materials at Bikini Atoll. (lol)

Let's discuss the Rape of Manila when we meet. Sino si Manila? Saan pala... May Manila rin kasi sa Oklahoma...(lol) Oooops, PG13 nga pala.

Mike


MIke,

I think we'll try the "salt thing" on the weekend. How did you fibnd Harry Potter? I preferred the old Dumbledore... But Hermione's getting prettier Big Smile [:D]

Ooops... back to modeling... Tongue [:P]

Jun


I almost fell asleep... Should have just gone to making my models.
  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 8:56 PM
QUOTE: Originally posted by Ben Borja

Good Morning Sigman, Mike J

Mike J, i found out last night that Rape of Manila (PG13) actually happened during1700 or 1800 wherein the Her Royal (English) Majesties armada captured Manila Bay and occupied Manila and nearby towns for almost a year until Spanish reinforcement came and drive them off.

Ben Borja


Ben,

You are right, it was when the British captured Manila in 1762 during the Seven Years war. Wouldn't it have been better if the British had taken over and not hand us back over to the spaniards in 1764 ? I actually doubt it, we would have been traded as slaves. Sorry about it, history fascinates me... used to compete in trivia contest when I was a kid...world history, general info.

We actually are talking about a different rape scene here which the japs did.
We just called it that. Cool [8D]

BTW,

Markie already gave his eaddy.

Mike
  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 9:38 PM
QUOTE: Adolf is that you? Hey, a lot of old hands are looking for you, as in they had been trying to get in touch with you; the late Bert for sure was one of them, but i guess now it 'll be up to his heirs; just dunno why; what gives pal?


Lord T aka Adolf!

How are you? How is your gate in panzer colors and Balkan Cross? Big Smile [:D]

BigMan
  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 9:49 PM
QUOTE: Originally posted by mdlchiw

BigMan,

thanks, but i have some more questions? hehe, does seamless sucker have a webpage, coz i cant find it?

Flightpath, UK
FP-GS-006 F-15 Eagle Tail Pipe Set

Do you think this Tail Pipe set is a seamless replacement for the exhaust, coz i also cant find it on the net?

mdlchiw



mdlchiw,

no problem, just keep the questions coming Smile [:)]

i dont think seamless suckers has a website of its own. have you tried browsing at hannants or squadron? i'll check my scale aviation magazines for their mailing address. they usually submit their product there for review once in a while. i'll get back to you on this one. Smile [:)]

i've visited flightpath's web but i havent seen their F-15 tailpipe Ashamed [*^_^*]. i suggest you visit www.aires.cz. they have replacement tailpipes for F-4s and F-14s. I dont know if they have tailpipes for F-15 since i cannot access their website (blank page always appears) and i dont know why! Banged Head [banghead]

cheers! Smile,Wink, & Grin [swg]
bigman
  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 9:57 PM
Hi Buck!

Nice to see your back!

Thanks again for the sig!

BigMan Cool [8D]
  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 11:50 PM
QUOTE: Originally posted by BigMan

QUOTE: Originally posted by mdlchiw

BigMan,

thanks, but i have some more questions? hehe, does seamless sucker have a webpage, coz i cant find it?

Flightpath, UK
FP-GS-006 F-15 Eagle Tail Pipe Set

Do you think this Tail Pipe set is a seamless replacement for the exhaust, coz i also cant find it on the net?

mdlchiw



mdlchiw,

no problem, just keep the questions coming Smile [:)]

i dont think seamless suckers has a website of its own. have you tried browsing at hannants or squadron? i'll check my scale aviation magazines for their mailing address. they usually submit their product there for review once in a while. i'll get back to you on this one. Smile [:)]

i've visited flightpath's web but i havent seen their F-15 tailpipe Ashamed [*^_^*]. i suggest you visit www.aires.cz. they have replacement tailpipes for F-4s and F-14s. I dont know if they have tailpipes for F-15 since i cannot access their website (blank page always appears) and i dont know why! Banged Head [banghead]

cheers! Smile,Wink, & Grin [swg]
bigman


BigMan,

www.aires.cz doesnt have replacement for the f-15. hannants, is that the one on the wood finishing products? theres also none in squadron.

which ACES II Ejection Seats is better thone from verlinden or aires, both in resin with photo etched parts?

mdlchiw
  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 11:54 PM
QUOTE: [i]
Oh well, there's always the next competiton.

Are you preparing for the Nationals na? That's a really big event. I remember the last National competion. It was a pity only a few entries came from the far provinces. But it was really fun. I'm sure the next will be even better.

Jun


Jun,
hopefully i could build a kit or even hust rehabilitate an old, depending on my schedule and workload- the nature of my work and its collateral duties makes scale modelling a rather elusive pasttime nowadays for me.
Ben- thank you for the welcome note



Yeah... I know about the rigors of work. I have to put off modeling for months at a time especially when I'm in the provinces... I envy those guys doing Research and Development at Academy and Tamiya here in the Philippines. Imagine they can build models all day... and get paid for it! Wink [;)]

Jun
  • Member since
    November 2005
Posted by Anonymous on Thursday, June 3, 2004 11:58 PM
QUOTE: Originally posted by Mike J

QUOTE: Originally posted by smvillalon

QUOTE: Originally posted by Mike J

QUOTE: Originally posted by Ben Borja

LordT, how's the little baby girl, were you able to repair the two shermans that you on
the floor , pare ko sci-fi fan din ako, have ten gundam "endless waltz" series,
W-gundam zero customs,.

Have been reviewing my FSM Mags collections (from 2000-2004) will prepare
photocopies of weathering techniques for desimination to our new members.

Mike J can we grant off-site membership to davao and zamboanga?

Noel - Tuloy ba yung group build na Rape of Manila (PG 13)?


Welcome to the Forum , Jepot

Ben Borja


We can give offsite membership to anybody as long as it is within the framework of our by-laws. Reggie will become an offsite member when he settles down out there. Iknow someone in Davao who may want to be a member of our group, unless he opts to join Benhur. I gave him benhur's email address for him to write to.

BTW,
I wasn't able to try the table salt technique, too tired after watching Harry Potter 3 last night. Will try again tonight.

I think Lord T's Shermans that flew off the stairs are actually test materials at Bikini Atoll. (lol)

Let's discuss the Rape of Manila when we meet. Sino si Manila? Saan pala... May Manila rin kasi sa Oklahoma...(lol) Oooops, PG13 nga pala.

Mike


MIke,

I think we'll try the "salt thing" on the weekend. How did you fibnd Harry Potter? I preferred the old Dumbledore... But Hermione's getting prettier Big Smile [:D]

Ooops... back to modeling... Tongue [:P]

Jun


I almost fell asleep... Should have just gone to making my models.


Me naman, I couldn't sleep... Yung kasama ko kept on asking me "who's that"? "What's that?" "what's he doing?" ... sometimes it's hard to go watch sequels with people who haven't watched the first parts. Sad [:(]

Jun
  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 12:50 AM
QUOTE:
BigMan,

www.aires.cz doesnt have replacement for the f-15. hannants, is that the one on the wood finishing products? theres also none in squadron.

which ACES II Ejection Seats is better thone from verlinden or aires, both in resin with photo etched parts?

mdlchiw


mdlchiw

too bad, aires makes very good replacement afterburner cans Disapprove [V]. i have the F-4B/N replacement in 1/48 and its really good!

then your best bet will the the replacement from flightpath. i'll try to research on this and i'll get back to you Blush [:I]

check out hannants at www.hannants.com.uk. sorry, i gave the wrong address earlier.Blush [:I]

actully both ejection seats are very good, thus you may want to decide on which replacement is cheaper. My 2 cents [2c]

good day!

bigman

  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 2:22 AM
QUOTE: Originally posted by smvillalon

QUOTE: Originally posted by Mike J

QUOTE: Originally posted by smvillalon

QUOTE: Originally posted by Mike J

QUOTE: Originally posted by Ben Borja

LordT, how's the little baby girl, were you able to repair the two shermans that you on
the floor , pare ko sci-fi fan din ako, have ten gundam "endless waltz" series,
W-gundam zero customs,.

Have been reviewing my FSM Mags collections (from 2000-2004) will prepare
photocopies of weathering techniques for desimination to our new members.

Mike J can we grant off-site membership to davao and zamboanga?

Noel - Tuloy ba yung group build na Rape of Manila (PG 13)?


Welcome to the Forum , Jepot

Ben Borja


We can give offsite membership to anybody as long as it is within the framework of our by-laws. Reggie will become an offsite member when he settles down out there. Iknow someone in Davao who may want to be a member of our group, unless he opts to join Benhur. I gave him benhur's email address for him to write to.

BTW,
I wasn't able to try the table salt technique, too tired after watching Harry Potter 3 last night. Will try again tonight.

I think Lord T's Shermans that flew off the stairs are actually test materials at Bikini Atoll. (lol)

Let's discuss the Rape of Manila when we meet. Sino si Manila? Saan pala... May Manila rin kasi sa Oklahoma...(lol) Oooops, PG13 nga pala.

Mike


MIke,

I think we'll try the "salt thing" on the weekend. How did you fibnd Harry Potter? I preferred the old Dumbledore... But Hermione's getting prettier Big Smile [:D]

Ooops... back to modeling... Tongue [:P]

Jun


I almost fell asleep... Should have just gone to making my models.


Me naman, I couldn't sleep... Yung kasama ko kept on asking me "who's that"? "What's that?" "what's he doing?" ... sometimes it's hard to go watch sequels with people who haven't watched the first parts. Sad [:(]

Jun


Pre,

Sino kasama mo?Evil [}:)]
  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 2:25 AM
QUOTE:
mdlchiw

too bad, aires makes very good replacement afterburner cans Disapprove [V]. i have the F-4B/N replacement in 1/48 and its really good!

then your best bet will the the replacement from flightpath. i'll try to research on this and i'll get back to you Blush [:I]

check out hannants at www.hannants.com.uk. sorry, i gave the wrong address earlier.Blush [:I]

actully both ejection seats are very good, thus you may want to decide on which replacement is cheaper. My 2 cents [2c]

good day!

bigman




BigMan,

is that so, too bad. ill just pray that they make it in the future while im still not working on it, heheBig Smile [:D]

www.hannants.com.uk doesnt return any webpage.

thanks again for the additional help. hope i can go to harrison plaza and have my kits ordered asap.

mdlchiw
  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 3:35 AM
QUOTE:
BigMan,

is that so, too bad. ill just pray that they make it in the future while im still not working on it, heheBig Smile [:D]

www.hannants.com.uk doesnt return any webpage.

thanks again for the additional help. hope i can go to harrison plaza and have my kits ordered asap.

mdlchiw


mdlchiw,

sorry! my mistake again Banged Head [banghead]!! its www.hannants.co.uk! sorry!Dunce [D)]

i'll check scale aviation magazine also for other manufacturers of burner cans. Big Smile [:D] i know i saw those burner cans somewhere.... Shy [8)]

maybe you can call natalie and ask for her email address so that you can email your orders instead.

happy weekend!

bigman Cowboy [C):-)]
  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 4:04 AM
lipton,

i remembered i'll get back to you re availability of 1/72nd italeri B-25s at lil's mega. sorry, there arent anymore. Ashamed [*^_^*]

on other news... the lady clerk at lils mega told me that they ran out of application forms and chopper shall deliver a fresh batch soon (i guess it was already delivered)! Shock [:O] the lady clerk also said that a lot were inquiring about the forms!

whew! i hope the venue will really accomodate all entries during the nationals. Blush [:I]

bigman
  • Member since
    June 2003
  • From: Cavite, Philippines
Posted by allan on Friday, June 4, 2004 4:35 AM
Lipton,

I cant see you but I know youre there. hehehe!

Bigman,

Anytime, my friend. Im trying to do one also for 4eyes. But the other guys are far better at this than me. My sig was developed mostly by Meekai.

Was in Tacloban yesterday and in Hotel Alejandro there's this fabulous collection of WW2 photos. In fact, every room has about two pics. And in the middle of the collection is a shelf full of WW2 scale model planes. I know the owner. Its a relative of Pointer.

No bucks, no Buck Rogers

  • Member since
    June 2003
  • From: Cavite, Philippines
Posted by allan on Friday, June 4, 2004 4:39 AM
Shrikes,

With that laser there will never, ever be exaggerated panel lines. Hehehe! I wonder how he put that thing to use. Imagine making hinges without a sweat.

No bucks, no Buck Rogers

  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 5:11 AM
QUOTE: Originally posted by allan

Lipton,

I cant see you but I know youre there. hehehe!


Eheh he he he.... Just came from MegaMall, bought a sable brush and a P-40E Warhawk in.....

..... 1:72nd scale.... and its YOUR fault. Big Smile [:D]Big Smile [:D]Big Smile [:D]

Shrikes and Bigman
Thanks my inquiry about the B-25. I guess I'll buy it from JMN na lang. Is that kit (italeri or revell? Sorry too lazy to scroll up :o) ) any good?

Dhel
Hello! Good to hear from you again. Sorry if I forgot your handle the other time. Di ko na kakalimutan ulit [I will not forget it again] promise. Approve [^]


Drats!!! Somethings wrong in my sig again grrrrEvil [}:)]
  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 9:25 AM
QUOTE: Originally posted by Dwight Ta-ala

Allan: Thanks.

Shrikes: Don't worry I am planning a diorama with a plane in it soon. Anyway, I am really expecting great entries from others since it is going to be the main model comp being the nationals. Moreover, I have great respect for the IPMS guys. I know that they are among the best of the best out there as far as plastic modeling is concerned. Parang nakakahiya pagnagsubmit ng entry na basta-basta lang. I will try to build something better and I hope I can finish it in time for the competition.

BTW, here is one diorama I just did which is also aircraft related.

http://geocities.com/ddta_ala/d5.htm

He-he-he. Biro lang anti-aircraft pala.


Hey dude! Nice dio! How was the Flak? Meron din ako nyan kaso di ko pa ginagawa. What I'm concerned much is the fit and gaps on the kit. Does it have a perfect fit?
  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 1:14 PM
QUOTE: Originally posted by cbrain

QUOTE: Originally posted by laninoche

hi cbrain

wish i was there,something wrong with the pics? i can't see your gerwalk.Smile [:)]


lani


lani & dhel

Sorry 'bout that, it seems that I've exceeded my allotted file transfer through my image hosting site. Wuhuhu.... even my sig isn't visible now. Blush [:I] ehehehe. Anyway I've opened another account in another host site.... Big Smile [:D]






cbrain

hey! its cute, nice and clean unlike my paintjob which is nothing less than dirty for now i mean..hehehe

what scale is it 1/144 or 1/100? does it really have big hands?

thanks, for the acrylic info.

lani
  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 1:20 PM
QUOTE: Originally posted by emjaetee

QUOTE: Originally posted by laninoche

yo! i'm here, tinkering with my F-22 this trumpeter kit isn't as good as the revell F-23.
i'm experimenting with tamiya acrylics on this one, i know with enamels if i make mistakes i just wash them with ordinary paint thinner, when it comes with acrylics how does it come off? oh geeez, my planeSad [:(]

i think beth and dhel are busy with overtime.

BTW were is mang ernie and allan?

lani


these might help you...

http://www.paintingclinic.com/clinic/clinic.htm

http://www.allsands.com/Art/acrylicspaintin_hy_gn.htm


hehehe... i usually use lacquers and enamel. Big Smile [:D]

cheers!



emjaetee

thanks, i'll check it out.

yeah, sacrifices must be made for the benefit of others...huhuhuSad [:(]

lani
  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 1:44 PM
QUOTE: Originally posted by laninoche

QUOTE: Originally posted by cbrain

QUOTE: Originally posted by laninoche

hi cbrain

wish i was there,something wrong with the pics? i can't see your gerwalk.Smile [:)]


lani


lani & dhel

Sorry 'bout that, it seems that I've exceeded my allotted file transfer through my image hosting site. Wuhuhu.... even my sig isn't visible now. Blush [:I] ehehehe. Anyway I've opened another account in another host site.... Big Smile [:D]






cbrain

hey! its cute, nice and clean unlike my paintjob which is nothing less than dirty for now i mean..hehehe

what scale is it 1/144 or 1/100? does it really have big hands?

thanks, for the acrylic info.

lani


cbrain

WOW! ganda naman, now i can relate can't see them before while everyone's talking about your gerwalk, it makes me want to drop whatever i'm doing start building mine.Big Smile [:D]


lani

the hands are really big, its an ARII 1/100 kit, i'd replaced mine with a spare 1/144 gundam hands to maintain proportion and function the hands do retract into the forearm during reconfiguration to veritech mode. mine ain't finish yet. buti ka pa tapos na F-23 moSad [:(]

good luck with your paint experiment.Big Smile [:D]


dhel

  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 1:52 PM
QUOTE: Originally posted by jmfrancisco

Dhel
Hello! Good to hear from you again. Sorry if I forgot your handle the other time. Di ko na kakalimutan ulit [I will not forget it again] promise. Approve [^]




Hi Lipton

me too, i promise i won't forget yours.Big Smile [:D] hehehehe ,saw your bradley on your website, outstanding! what's your next build?Smile [:)]

dhel
  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 2:20 PM
QUOTE: Originally posted by dhel

QUOTE: Originally posted by laninoche

QUOTE: Originally posted by cbrain

QUOTE: Originally posted by laninoche

hi cbrain

wish i was there,something wrong with the pics? i can't see your gerwalk.Smile [:)]


lani


lani & dhel

Sorry 'bout that, it seems that I've exceeded my allotted file transfer through my image hosting site. Wuhuhu.... even my sig isn't visible now. Blush [:I] ehehehe. Anyway I've opened another account in another host site.... Big Smile [:D]






cbrain

hey! its cute, nice and clean unlike my paintjob which is nothing less than dirty for now i mean..hehehe

what scale is it 1/144 or 1/100? does it really have big hands?

thanks, for the acrylic info.

lani


cbrain

WOW! ganda naman, now i can relate can't see them before while everyone's talking about your gerwalk, it makes me want to drop whatever i'm doing start building mine.Big Smile [:D]


lani

the hands are really big, its an ARII 1/100 kit, i'd replaced mine with a spare 1/144 gundam hands to maintain proportion and function the hands do retract into the forearm during reconfiguration to veritech mode. mine ain't finish yet. buti ka pa tapos na F-23 moSad [:(]

good luck with your paint experiment.Big Smile [:D]

dhel



cbrain

nice job! i see you got dhel's full attention on your gerwalk she goes gaga on anything that is macross it relieves her of stress..Big Smile [:D]

dhel

seen something you like?Smile [:)]i haven't munched on anyone in the field. well, not yet.Big Smile [:D]

emjaetee

hi there! i'm still alive and kicking,Big Smile [:D]

lani

good luck!Big Smile [:D]


beth
  • Member since
    November 2005
Posted by Anonymous on Friday, June 4, 2004 2:43 PM
hi guys,

i'm still working on my CV6 and decided to finish it in its mid-war version, did the Enterprise recieved her catapults during this period or later of 1944? i don't know if the 1/700 tamiya kit is an early version of her or they just forgot to add the catapults?

does anyone knows what type of scheme was she painted between 1943-44?

rod

  • Member since
    December 2003
Posted by jepot on Friday, June 4, 2004 6:00 PM
please be advised that there will be a static display of AFP equipment at the old PC Barracks in Intramuros on June 7 2004; not sure for how long will the display be; info from OJ-7, GHQ. To those who are into AFP stuff, well, you might find equipment you want to see- except of course flying and floating assets, obviously...
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.