1/350 Scale Aircraft Diorama

UPDATE 23

Hi Again Guys!

I put the decals on the F-111TACT.  They went on without a hitch.  The only problem is that I noticed when I was putting them on that the text below TACT did not print across as it should of, and printed on multiple lines.  My file isn’t that way, so Yuuichi must have truncated it by accident when he printed them, and neither one of us noticed it.  It’s unfortunate, but I can live with it (I think).

I also went ahead and glued the office building in place.

UPDATE 22 – 2/15/2015

Ola Mi Amigos!

I haven’t done too much modeling over the last few days, but I did put the F-111TACT together, and gave it a coat of Future.  I also touched up the white parts of the office building/circuit board housing.

I hope to put the decals on later today.

CHEERS!!!

UPDATE 21

Good Morning All!

I redid the decals on the U-2, following the advice I received from a fellow modeler, with much more experience than myself.  I first removed the decals and sprayed the model with Future.  When it dried, I applied the decals, and when they dried, I sprayed it with Dullcoat.  I think it looks better.

I also painted the Office Building, using 3 coats of white Rust-Oleum Plastic Primer, with a light sanding between coats.  The window frames, back door (I forgot the front door) and awning were painted with dark blue Model Master’s Acrylic.  I still have some touch ups and the front door to do, and of course, the nickels are only temporary.  

HAPPY MODELING!!!

UPDATE 20

Hi Again Everybody!

I’m continuing to make progress on my diorama.  I painted the black bit on the nose of the F-111TACT.  I thought about trying to make a template, but in the end I did it by hand.  As you can see, the left side came out better than the right side, which is no surprise since the plan was for the right side to be facing the viewer.  Even so, it looks pretty good with the naked eye.

I also painted the tables.  The tables themselves are white (at the moment although I’m considering painting them grey) the umbrellas are red and the umbrella poles are silver.

CHEERS!!!

UPDATE 19 – 2/3/2015

Thanks tankerbuilder! 

I hadn’t thought about doing a Falcon, but it isn’t out of the question.

With the tower wired and working, it was time to start building some of my models for the dio.  I completed the U-2 and the El Caminos, although in the process of taking these pictures I realized that the tail decals separated from the surface in places, so I redid I, but I’m going to redo it again, because it has been recommended that I spray a coat of glosscoat, or even future on it, before applying the decals, followed by a coat of dullcoat.

The last picture shows the models in their spots on the dio.  I was initially going to display the U-2 still beating it down the runway and the El Caminos in hot pursuit, but when I put it in position, I started thinking that it may be better to have it as if it just came to a stop and toppled to one , with the El Caminos close in.  This will prevent me from having to glue it in place, which, at least for the time being, I would like to avoid doing as much as possible.  If I ever get around to putting people on it, I could have airmen putting the pogos in place.

Hey ! That's neat  

.I liked your G-1V . Are you gonna do a Falcon 10 or 20 in natural metal ? Ya know for when I landed at Sanctuary field ta get gas ? L.O.L.   I flew unmarked ( temp markings . ) Falcons from Orly to the States for Falcon of North America many yearens ago. The only thing finished inside was the ferry cockpit .

UPDATE 18 – 2/1/2015

Hi All,

I glued the G-IV in position on the dio, as seen in the following two images.  I don’t plan on gluing planes on, unless I have to.  The G-IV was back heavy, and wouldn’t lay flat.  I’ll have to glue the U-2 on, since I am displaying it on the runway after landing.  They didn’t have wing gear, and I doubt it will stand up by itself.  And of course, I’m going to have to glue the F-111TACT and one of the T-38’s on, since they will be at least partially in-flight.

After taking the pictures, I realized that I should probably dull coat the base, because even though it’s kind of cool to see the slight reflection of the model on the ground, it’s not very realistic.  I used only a small dab of superglue to attach it, so I can always take it off if I decide to do it. 

I gave the office building and tables a Future dunk and am waiting for them to dry so I can prime and paint them.  The image bellow shows the circuit board without the office building covering it.  It is upside down because I had already designed the office building to house it based on the dimensions on the internet, and there wasn’t room for the wires.  The board is so light though, that it is support by the wires connecting it to the light. 

Hi again guys,

I drilled the necessary holes and did the wiring for the beacon light.  I did it wrong the first time and had to redo it, but it’s working good now, as you can see below.  I also glued the hangars and tower in place, adding posts to the hangars in the form of ¼” styrene tubing, which went in holes drilled in the base.  The office building is just sitting there and I'll start the painting process on it tomorrow.

Greetings All!

It has been a while since my last update, but I haven’t had anything to report, as I have been waiting to get the office building/circuit board holder printed.  It’s a long story, but I finally had C2D print it, along with some tables (with umbrellas) I made.  For the most part, I’m pretty happy with the way everything turned out.  The only real issue I had was that the supports for the front door awning.  The outer most ones are gone and the inner ones are warped.  I should have over sized them more and used a larger diameter, but I can easily use styrene or brass rods to replace them. 

The circuit board fits perfectly,…

…So now it’s time to drill out the base board and do the wiring for the beacon light.

UPDATE 15

Hi again everybody!

I had some time to kill this afternoon, so I put the wheels on the El Caminos.  It went way smoother than I thought it would.  I only lost one.  Fortunately I had several spares.  You might notice that the alert beacon in the back of one of them is missing.  It printed OK, but I think I knocked it off when I unpacked it.  I still have it, but I think it would be near impossible to get it back on.  I guess we’ll see.

UPDATE 14

Thanks Bish!

I’ve made a start on another “scene” of the dio.  I partially assembled the U-2R and first sprayed a coat of Future on it followed by a coat of Rust-Oleum flat black.  Next, I will sand it and give it another coat.  I also brushed on 2 coats of Modelmaster’s “Ensign Blue” enamel on the chase El Caminos, and a coat of Testor’s gloss black enamel on their wheels.  The El Caminos are TINY!  Putting the wheels on is going to be a challenge.

Now this is some amazing work and a brilliant idea. Will be sure to keep an eye on this.

UPDATE 13

Hi Everybody,

I’ve made slow progress on the diorama, although perhaps not as much as I would like.  Still, some progress is better than no progress.  The images below show the almost completed G-IV in position on the dio to be.

UPDATE 12

Thanks m1!

I haven’t spent much time on the diorama in the last couple of weeks, but I did just put the decals on the surviving T-38.  I still need to brush Microsol on them and paint the engine intake areas black.  I’m also going to put a new nose gear assembly on it when it arrives, but I wanted to see how the decals would look, so I went ahead and did them.  I’m pretty happy with them.

CHEERS!!!

That's just simply amazing!  

UPDATE 11

This post ought to make you feel better T.B. 

I haven’t gotten a lot done on the diorama, but I did get the decals on the F-111A’s.  They went on real smoothly, and after they dried I applied MicroSol to them.  Even though the tail letters on the port side were damaged slightly, and the stripe slopes down, I’m fairly happy with them

I also painted the noses of the T-38’s black and their exhaust pipes silver, had let them dry and was preparing to put the decals on them when a minor disaster struck.  The models were on my work table behind my desk, where I was working on my computer, when my wife called urgently.  When I spun my chair around to go see what the problem was, I knocked my half full coffee cup over on top of them.  Needless to say it was not a pleasant scene, with my wife calling for me while I frantically cleaned up coffee, which I had mostly cleaned up before I noticed the carnage.  One of the T-38’s was only missing a front wheel.  The other one suffered more serious damage, as you can see in the pictures below.  Two of the three wheels were broken off and the top of the tail fin was gone.  While searching for the parts, I found the nose gear for the less damaged model floating on a small pool of coffee I had missed.  I never found the tail or other wheels.  I imagine that they went into the trash with coffee soaked paper towels. 

I was able to put the wheel back on the less damaged model, but the other one just became the first member of my Bone Yards.

Oh… And 1/700 big ships are hard!

Gee Whiz!

  Can you do any more gorgeous stuff to make me feel bad . Whatta ,Brain you is got ! He.He. I do like and will continue to follow your work . And I thought 1/700 big ships were hard ?      T.B.

UPDATE 10

Good Afternoon Guys!

I have a couple of good things happened today.  I had my Battery Case and Office Building printed today, and I received my Beacon Light kit.  The picture below shows the beacon light kit and the parts as they printed.  Today’s color was orange.

I paid the extra $10 for assembly and testing, so I got to try it right away.  I’ve never posted a video to You Tube before, nor have I tried linking one from this site, but if it works, here is a super short video of it.  I kept it short to keep the file size down, but you get the idea.  The light is in the top of the tower, that I had to drill slightly larger with a hand drill to get it to fit.  The light diameter was between drill bit sizes (of course), so the hole is slightly large, but I think gel superglue will do the trick.

The picture below shows a close up of the Office Building, as printed.  I’m not happy with it at all.  I’m going to have to redo it and get it printed on a better machine.  Not only did it not print particularly well, the inside dimensions are slightly too small for the circuit board.  If it looked alright, I could probably sand the sides down enough to fit it in, but the capacitor is slightly taller than the specs I saw on their web site, so it doesn’t quite fit.  I could make a skirt for it if the part printed nicely, but it didn’t.

The battery/switch case is a slightly different matter.  You can see in the image below, taken as it printed, that the battery fits nicely in the case.

I’m glad that I paid the extra $10 for assembly and testing, but as expected, I’m going to have to redo the wiring to fit it to my dio.  Knowing this, I cut the wires from the various components, and assembled the battery/switch box.  Fitting the switch required a little scraping with an Exacto knife, but I was able to get it in so it fits good and snug.  I was going to glue it in place, but that would make it extremely difficult to repair should a wire get pulled loose while changing the battery.

There is one minor issue.  I designed the box for a top with the wires coming out of the clip perpendicular to the battery nodes, and the clip they sent comes out one end.  The box closes snuggly the way it is though, so I’m not going to worry about it.  I don’t need to paint it either, because I think I’m going to put the switch in the top drawer under the display. 

UPDATE 9B

Hi Again All!

I couldn’t help myself.  I had to put the T-38’s in their approximate positions, even though they aren’t completed.  I thought you might be interested in seeing it too.

CHEERS!!!

UPDATE 9

Hi All!

Well, I put the second T-38 together, with only one slight issue.  I broke a wheel off the front landing gear.  Fortunately, since the 2^nd T-38 will have its nose gear up, and the 1^st one has all gear on the deck, I had an extra extended nose gear, so no real harm was done.

After I put it together, I went out and sprayed the undersides of them.  Here my modeling inexperience really showed, as I didn’t mask the windows thinking that as long as they were upside down, nestled in a cloth, they would be OK.  Well they were lame before, now they are partially painted lame.  I’ll have to give some thought on how to best deal with it.  I have several options, but I’m not crazy about any of them.

Anyway, you can see different attitude of the 2 planes due to the slightly different nose gear.  You can also see that I positioned the flaps up on the 2^nd one.

UPDATE 8 – 8/24/2014

Good Morning All!

I started the day off with my usual coffee, and decided to work on one of the T-38’s.  I learned real quickly that I didn’t plan the build very well.  I should have put the inner gear doors and speed brakes on before I painted it, possibly the gear too.  The fit of the parts is so tight that I had to spend quite a bit of time scraping the paint out of the recesses so the parts would fit.  Once I got the paint scraped out though, the parts fit like a glove, and the gear nestled in to the recesses nicely so that I didn’t have to worry about alignment.  After assembling them and turning the plane over, it sat level and balanced.  YEAHHH!!!

I had one slight issue, as I learned, once again, that small parts and tweezers don’t mix.  I had cut out the first speed brake, but had inadvertently left a little small bit sticking out.  I used the tweezers to hold it down as I cut it off and then I heard that dreadful “twing” sound, and the part disappeared.  I saw which way it went, and thought I heard it hit something to my left, but after 30 minutes of searching on my hands and knees with a flash light and magnifying glass, I gave up the search.  Luckily it is on the underside of the T-38 still on the deck, and won’t be visible.

Next, I will sand it lightly, mask the windows (that are somewhat lame), and give it one final light coat of paint.

This is fun, even with the fruitless and somewhat frustrating search for the Houdini part.  NO MORE TWEEZERS!

CHEERS!!!

UPDATE 7

Thanks mississippivol!  “I’m a likin’ it” (so far) as a mentor of mine would say.  Of course I’m a looong way from finishing it.

I haven’t had a lot of time to play with it this week, but I did mask the F-111TACT in preparation for painting the light gray areas.  After doing that I decided to give it another quick shot of white to seal the tape seams.  Unfortunately, it wrinkled on me, as you can see below.  I suspect it was the heat, as it was almost 100 ^oF yesterday.  Fortunately, I don’t have to paint the areas that wrinkled, so I just sanded them off, and it should be OK.

I’m trying to decide now how to paint it.  I have some Model Master’s acrylic Aircraft Gray, and I was originally planning on brushing it on, but I am now considering spraying it.  I have an El Cheapo spray gun though, that I have only used for spraying Future, and am not sure how good it will do.  I know if I’m going to spray it that I need to go get some thinner, but I’m a little leery of trying it since I have never used a spray gun to paint models before.  Any suggestions?

On another note, I brushed Future on the canopy parts, but they still aren’t very clear.  I thought about trying to make my own glass bits, but in the end decided to use the parts that came with the kit.  It doesn’t look the greatest, but I’m hoping it will look better when I get the frame bits painted white.  I think if I was doing the CAD work for them again, I would make the canopy one piece, at least for the in-flight version.

Hopefully, I will get to play with it some more tonight.

CHEERS!!!

That's coming along nicely!

UPDATE 6

Hi Again Everybody!

I just brought the base back in and put it in its spot.  Of course I had to take pictures.  I don’t know why the “grass” looks gray.  It’s not.  It’s green.  It doesn’t really matter though.  I think I’m going to cover it with green felt, but I haven’t decided yet.  Also, I don’t know what the apparent smudges on the tarmac are.  You can’t see them at all when you look at it, no matter what angle you look from.

CHEERS!!!

UPDATE 5 – 8/19/2014

Good Evening Everybody!

I printed out the new base for the diorama today.  As before, I printed it on glossy paper, which cost $12.  I then stopped by Michael’s and bought some Scotch Super 77 spray adhesive and glued the print out to the base board.  The process went a lot smoother this time than the last.  I only have one little smudge, and it is definitely glued on better than the last one was.

In order to keep it from fading to light yellow again, I sprayed it heavily with Krylon UV-Resistant Clear Acrylic Coating (Matte).  I don’t know if it will work, but it was worth a shot.  The picture below shows it drying after I sprayed it.  Sorry that it is so dark.

While letting the glue dry, before spraying the UV protection, I painted the letters on the hangars. The fact that they were printed raised made this easier, and I am happy with the way they turned out.

On another front, although the office building will house the circuit board for the light beacon, something still needs to be done about the battery, connector and switch.  I decided to build a box for it, that at the moment I plan on storing in the drawer below the display.  I considered attaching it to one of the sides of the dresser, but thought that keeping it in the drawer would minimize the risk of damage when the battery needs changing.

I started by going on line and finding dimensions for a 9-volt battery, the battery connector, and the switch.  These items are shown in red in the following images.  The top was designed to house the connector and it may even be possible to glue it in place within the top.  It was also designed to fit snuggly inside the bottom.  The bottom has a hole in the side for the switch, and a hole in the bottom for the wires to go to the display.  The bottom was made to have 2 sides, one for the battery, and one for a little extra wire to accommodate changing the battery. 

School started back yesterday, so the earliest I could get access to the printer is next Wednesday.   Hopefully I can get these and the office building printed then.

UPDATE 4 – 8/18/2014

Hi Everybody!

I have had a good evening so far, as I mostly completed the F-111A.  I started by painting the gear and bomb clusters, black and dark green, respectively.  I used the same Model Master’s acrylic, which I like because it goes on smoothly and dries fast.  I painted the clear plastic parts with Future, just dabbing it on, rather than painting.

The assembly was fun and I learned something.  To make my locator tabs, I use spheres, subtracted from one part and joined to the other, the tab being 0.002” less diameter than the recess.  This is the easiest way to do it, but it doesn’t allow for good alignment.  I should have used two of them, or made them using oblong rectangles, so it would force the parts to be straight.  In the pictures below, you can see that one of the bomb clusters is ***-eyed. (I have since fixed it.)

Everything went fairly smoothly for a while.  I started with the windows, beginning with the side attached to the fret.  They were somewhat tricky to get in, and one of the tricks was making sure the tabs were cut cleanly, and that the paint was scraped from the edges.  Through trial and error, I learned that the best way to put them in was to stick an Exacto knife blade into the part on the side facing out.  I could then move it carefully into position, then shift the knife slightly and the part would come off.  After a few tries, I could get it to come off where I wanted it (or close) and nudge it into position.  A dab of super glue filled the spaces, thanks to capillary action, and I soaked up the rest with a paper towel.  This method seemed to work fairly well, so I did the same thing on the airframe side.

The main gear were next, and they fit like a glove, and the bombs went on fairly easily.  Even the crooked one went on nicely.  I’m not sure how it got crooked.

The front gear did not go so well.  I didn’t get the hole it fit in cleaned out enough, I guess, and it was crooked.  In the process of trying to straighten it, I accidently hit the wheels and knocked them off.  No big deal.  I straightened the base and glued it in place.  Then I picked up the wheels with tweezers and was getting ready to attach them to a dab of glue I had ready and TWING. They disappeared.  I felt something hit my arm and heard something hit a plastic bowl.  One of the wheels was by the bowl.  The other one, the one that hit my arm was gone.  30 minutes later, on my hands and knees  with a flashlight, I found it, just as I was about to give up.  After I found them I used the Exacto knife stick trick to easily get them on, and although they are not perfectly straight, you have to look pretty hard to tell.

The camera, with telephoto lens, that I used to take the pictures, really shows my flawed painting.  It looks a lot better in person than the pictures show, but thanks to the pictures I know that I have some touch up painting to do.  There are a lot of holidays, as my dad calls them.

Besides the paint touch ups, all that is left are the decals, which are in the mail.  The last image shows the decal sheet I made for the F-111A, and were printed by Yuuichi Kurakami.

It was a fun model to build.

CHEERS!

:o)  You are close mississippivol.  I don’t use a microscope, but I do use a magnifying lamp.

Man, I'd need a microscope to work that small! Lookin' great!

UPDATE 3

Good Evening Everybody.

As anticipated, I painted the F-111A airframe in camo today.  I used Model Master Acrylic paints including Dark Tan (FS30219), Medium green (FS34102), Dark Green (FS34079), and Flat Black (FS 37038).  I used a pattern found on line and tried to match it as closely as possible, without being anal about it.  I’m not very experienced at modeling, so it’s not the greatest paint job in the world, but I’m fairly happy with it.  I suspect however that I will probably make some touch ups on down the line.