SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Messerschmitt BF109 GB 2012

245478 views
1198 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, January 10, 2013 4:57 PM

Thats a lovely looking 109 tax. Great work on the paint job.

I know plz66 hasn't been around for a while. But seeing as this GB is on going, and i am building a 109 for the 1943 GB, i am going to jump in on this as well.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Thursday, January 10, 2013 4:46 PM

Thanks Rigid, I've finished the 109-G6, apart from the filter (?) that goes on the air scoop on the side of the fuselage. I've lost it somewhere in the last 48 hours. I'll wait to see if it shows up, or whether I have to come up with another one. I can vouch that its not on the modelling bench, not in the carpet around the bench and most definitely not amongst all of the gunk in the vacuum clean - yuck.

It's the Italeri 1/72 109G-6, which I picked up for $2 somewhere. Extra work was to add an instrument panel  from resin, photoetched seat belts, drilled out the gun barrels, added the aerial wire, and a scratchbuilt pitot from Microtube. Then I just built and painted it. I also used an Eduard masking set for the canopy, saves heaps of time. I also pinched some swastika decals from the stash, as the kit didn't include any.

It's my first try at freehand camo without masking, it's not bad but the scheme has minor differences from the instructions.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    October 2008
  • From: Georgia
Posted by Rigidrider on Tuesday, January 8, 2013 6:24 PM

Looking good Tony! Bravo!!!   Yes

When Life Hands You A Bucket Of Lemons...

Make Lemonade!

Then Sell It Back At $2 Bucks A Glass...

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Tuesday, January 8, 2013 4:32 PM

I reckon 4 in  row would finish me off too.

I had a busy night then couldn't sleep so I put all the detail bits on it. I think there's the flat coat, some weathering and exhaust stains, aerial wire, pull the canopy mask off and navigation lights and I'll call it done. Apologies for the poor photography, I hurriedly took them before work this morning.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Tuesday, January 8, 2013 8:37 AM

Heh, I just finished 3 at once, and have 1 half done now, getting alittle burnt out on mottling, need to switch to something else for a bit.

 

 

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Monday, January 7, 2013 9:17 PM

Yep, the white spots are just that. I put a coat of Future over them this morning and they magically disappeared ,as always. I can remember being alarmed the first time it happened though.

Every time I build a 109 I want to build more, but other projects and GBs always get in the way ! I knew a guy who churned out one 1/48 109 per month for years, must have been a stunning collection.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Monday, January 7, 2013 6:51 PM

Lookin' good so far Tony. Nice airbrushing and like a few others have said before, great scheme!

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Monday, January 7, 2013 4:57 PM

Nice clean build Tony. I take it the white spots are from the setting solutions affecting the Future?

 

 

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Monday, January 7, 2013 4:52 PM

I've made no effort to verify the authenticity of the scheme, I'm just building this one. Anyways, I've given it the panel line wash, a coat of future and the decals. The kit decals go down pretty well, only one showed some silvering. I do think they are a little over size though. You'll note that there is some whitening of the future around some decals on the wing upper surfaces. As usual, a subsequent coat of Future has eliminated that effect, but I haven't photographed that yet. I will probably delay the flat coat until tomorrow as it's hot again here today, and too hot to spray in the garage. I might tinker with the prop, aerial, undercarriage and ordnance tonight instead.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Sunday, January 6, 2013 3:59 PM

Nice job. Interesting colors for a G-6

 

 

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Sunday, January 6, 2013 3:22 PM

Mine is a HP-B Plus. I am really impressed with how easily it sprays really fine lines.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    January 2012
  • From: East Peoria, IL
Posted by stoutfella on Sunday, January 6, 2013 1:04 PM

Nice. Which Iwata did you get? I got the HP-CS I asked Santa for.

Cheers,

Stoutfella

On the bench: 1/48 Tamiya Bristol Beaufighter

On deck: 1/48 Tamiya P51-B

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Sunday, January 6, 2013 1:01 PM

Nifty looking camouflage.  Well-done.

 

 

 

 

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Sunday, January 6, 2013 7:29 AM

OK, here are some more progress shots of the Italeri 1/72 Bf 109G-6..

First, marked up ready for camo.

I was keen to try the Iwata airbrush I got for Christmas, so I decided to test it out and freehand the camo scheme. Not too bad, have to be very careful to keep it tight in 1/72 though. The only masking used was the canopy framing (thanks Eduard) and the yellow fuselage band.

Hopefully progressing to gloss and decalling shortly.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Friday, December 28, 2012 8:53 PM

Thanks Mustang, I've added the RLM 76 now.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Wednesday, December 26, 2012 7:11 AM

Looking great so far taxtp!

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Wednesday, December 26, 2012 1:49 AM

Here is the last photo before paint. These Eduard masking sets make it really easy, a great time saver.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Wednesday, December 19, 2012 5:24 PM

Thanks, Trey!

 

 

 

 

  • Member since
    August 2009
  • From: Borlando Fla home of the rat
Posted by TREYZX10R on Wednesday, December 19, 2012 5:12 PM

CMK that 109 came out fantastic ,graet looking build!

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Wednesday, December 19, 2012 4:15 PM

Thanks, Stoutfella.  I admit, I used your posted photos for some inspiration and reference.

 

 

 

 

  • Member since
    January 2012
  • From: East Peoria, IL
Posted by stoutfella on Wednesday, December 19, 2012 8:30 AM

Checkmateking02: A belated "ditto" from me. That Emil turned out very nicely!

Taxtp: Eager to follow your progress. Looks like a good start.

Cheers,

Stoutfella

On the bench: 1/48 Tamiya Bristol Beaufighter

On deck: 1/48 Tamiya P51-B

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Wednesday, December 19, 2012 8:09 AM

Thanks, taxtp.  And, it looks like you overcame the mess.  Good work!

 

 

 

 

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Tuesday, December 18, 2012 3:02 PM

Checkmateking - somehow I missed your completed 109, it's very good.

I'm back on my little Italeri 109G, and finished the main construction last night. The seams are all OK now, alhough the wing to fuselage join was a mess.

I'm just taking it one GB at a time.

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Wednesday, November 21, 2012 2:55 PM

I need to get busy with the ANZAC group build.  I've begun work, but haven't posted any photos of progress.  I'm encountering some discrepencies and confusions on the net about the paint scheme.

Also pledged to the 1943 GB when that starts up, and Bish's "Gift" GB.

 

 

 

 

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Wednesday, November 21, 2012 11:54 AM

checkmateking02

Thanks to you all for the comments.  I appreciate the insights and advice I received along the way.

What's next?

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Monday, November 19, 2012 4:55 PM

Thanks to you all for the comments.  I appreciate the insights and advice I received along the way.

 

 

 

 

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Monday, November 19, 2012 12:18 PM

cmking - that turned out super!  Really amazed at how well this one turned out considering the quality of the moldings. 

regards,

Jack

  • Member since
    July 2011
  • From: minnesota
Posted by handiabled on Monday, November 19, 2012 12:08 PM

 

 

 

                                       Ditto    YesCool

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Monday, November 19, 2012 11:48 AM

checkmateking. There aint NOTHIN wrong with that! That looks fantastic chief.

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Monday, November 19, 2012 8:26 AM

A few final views.

That's it.  I enjoyed the GB, I enjoyed the kit.  It's not so bad, when it's finished.

Thanks for looking.

 

 

 

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.