SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

WW III GB

14843 views
94 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2008
  • From: Wherever the hunt takes me
Posted by Boba Fett on Sunday, February 6, 2011 11:06 AM

This is the GB that never dies! Ok,, I'll sand my F-16 and get some paint on it...

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Sunday, February 6, 2011 10:50 AM

Very nice!  Also, kudos for having stuck with it. My project is still in gloss coat, untouched for several months......

Apprentice rivet counter.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Friday, December 31, 2010 8:53 PM

Well my entry to this GB is finally done. Marked as a Guards Airborne BMD-1P as dropped into Calumet Colorado in the opening of Red Dawn...:bigun2::ak2::AR15firing:

The VDV Airborne figure is by Dragon and shown for scale with the little beast...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Tuesday, November 2, 2010 8:33 PM

Yes it is alive.....Today I applied a gloss coat and then decals once it dried. Markings are for a Guards Airborne unit.

Next up is a flat topcoat... deatil painting,weathering and final bits attachment....

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Tuesday, November 2, 2010 3:15 PM

It's alive!

Apprentice rivet counter.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Monday, November 1, 2010 6:39 PM

Break that puppy out Boba! Well today I was able to get the Russian Green basecoat on. I used Mr Color and am not overly impressed with that line of paint. Their old Aqueous line airbrushes far better. In its' favor though the Mr Color had no problems covering the PE parts unlike most acrylics.

Tomorrow my goal is a gloss coat and maybe the decals...

 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    May 2008
  • From: Wherever the hunt takes me
Posted by Boba Fett on Wednesday, October 13, 2010 11:49 AM

gosh darn it... forgot about this GB! Maybe I should pull my F-16 out of the stash again...

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Tuesday, October 12, 2010 7:56 PM

Well six months later I have completed all building on this kit.Embarrassed But hey, it is finished buildwise (except for attaching the shovel and crowbar after the basic painting is completed...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Thursday, April 22, 2010 1:06 PM

I've been building, just doing other things, I guess.  I still plan on finishing mine, just don't know when......

Apprentice rivet counter.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, April 15, 2010 5:18 PM

Same here...I have been in the model building doldrums for awhile here...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Thursday, April 15, 2010 5:06 PM

Is anyone still working on anything here?  Mine's been shelved for quite a while.....

Apprentice rivet counter.

  • Member since
    October 2007
Posted by White_R34 on Thursday, April 15, 2010 10:49 AM

Magnificent work guys, as I'm a big fan of Ghost in the Shell. The chopper is number one on my list of must haves. I Love the work on the BMD (Must Have) and Abrams(Got two). Keep it up guys love this theme.

Building the Impossible Is my main goal!!
  • Member since
    October 2006
  • From: Lakewood, CO
Posted by kenjitak on Tuesday, January 12, 2010 12:30 AM

Sorry I have to renege on my build for this GB. Some major parts were lost or missing from kit. There have been some great builds here, it would've been an honor to on here with you.

 

Ken

  • Member since
    January 2009
  • From: Oregon
Posted by falschimjager on Thursday, December 24, 2009 5:45 PM

That thing looks vicious, Love the air cavalry Insignia

amerruss_flag_promo.jpg picture by eclark262

frop.jpg picture by eclark262

Badges finally redone they should work.

  • Member since
    December 2002
  • From: Midwest US
Posted by balta1 on Thursday, December 17, 2009 8:16 PM

I've made some more progress! I tried to preshade nut it didn't come out the way I wanted toSad I'm still a little heavy handed on the airbrush but at least it gave me some practiceSmile I did find some areas that I will need to touch up then it will get a wash.

WIP pics

Stir not the bitterness in the cup I have mixed for myself!

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Monday, December 14, 2009 6:29 PM

Neat!

I did nothing on my M1 but did work on the base a bit. I just need to decide on the final markings and finish the base.

Apprentice rivet counter.

  • Member since
    December 2002
  • From: Midwest US
Posted by balta1 on Saturday, December 12, 2009 12:22 PM

Well still makinf progress! I'm trying to wrap up this build by the end of the year. I've layed down the primer and now I'll do some preshading. I still dont know if I should paint it Helo Drab or a ghost grey scheme. Here are some WIP pics.

Stir not the bitterness in the cup I have mixed for myself!

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Wednesday, December 2, 2009 11:15 AM

I didn't even look, it's been just a busy GB.....Whistling [:-^]

I suppose I should finish up, but I've got serious "modeller's ADD". Oh well.

Apprentice rivet counter.

  • Member since
    January 2009
  • From: Oregon
Posted by falschimjager on Tuesday, December 1, 2009 7:20 PM
 RBaer wrote:

Pics sure are small.....

I've got a couple of pics on my M1, but they're not great, camera's not going to the proper setting. I'm going for a re-marked, out-of-the-reserves look, so I put on some "fictional" markings, then put more right over them after scraping them up pretty good. All the markings are from Verlinden's old M1 dry-transfer sheet. Latest unit marking are supposed to be from a unit stationed in Germany, 1988 or so. I'm going to percolate on it a while before I put the last coat of clear flat on. I'm not sure if I like the big "USA" on the engine cover yet. Also I have a pic if the base I've started for it, it's the beginnings of a European street scene. Comments appreciated......

 

man that looks really nice.

Has anybody else noticed that this has technically been over for a month?Laugh [(-D], oh well looking forward to the rest of the builds.

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Thursday, November 5, 2009 5:41 PM

Pics sure are small.....

I've got a couple of pics on my M1, but they're not great, camera's not going to the proper setting. I'm going for a re-marked, out-of-the-reserves look, so I put on some "fictional" markings, then put more right over them after scraping them up pretty good. All the markings are from Verlinden's old M1 dry-transfer sheet. Latest unit marking are supposed to be from a unit stationed in Germany, 1988 or so. I'm going to percolate on it a while before I put the last coat of clear flat on. I'm not sure if I like the big "USA" on the engine cover yet. Also I have a pic if the base I've started for it, it's the beginnings of a European street scene. Comments appreciated......

 

Apprentice rivet counter.

  • Member since
    January 2009
  • From: Oregon
Posted by falschimjager on Wednesday, November 4, 2009 5:25 PM
  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Wednesday, November 4, 2009 11:15 AM

I did the markings on the M1 this morning, as soon as I get the camera functional I'll get a pic or two up.

BMD's looking neat!

Apprentice rivet counter.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Tuesday, November 3, 2009 4:10 PM

Here are a few shots of the BMD... getting close to finishing

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    December 2002
  • From: Midwest US
Posted by balta1 on Monday, November 2, 2009 9:21 PM

Here's some pics of my progress. I plan to have primered by this weekend.

Stir not the bitterness in the cup I have mixed for myself!

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Tuesday, October 27, 2009 5:55 PM
I actually did a display base for my M1 (well, it's well under way...) so I should have some progress to show soon.....

Apprentice rivet counter.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Sunday, October 25, 2009 3:08 PM
I tok a break from my BMD for awhile. But last week on my days off I made some progress on the suspension. I will try to get that (mainly those dang indy link tracks) done, and finish up construction this week.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    May 2008
  • From: Wherever the hunt takes me
Posted by Boba Fett on Sunday, October 25, 2009 11:11 AM
 btp2k2 wrote:

 Boba Fett wrote:
Ok. I got the seat out. The thing is a gem! I plan on adding to it, and modding the side consoles with the Revell parts. Why could'nt AMT do that? And the AMT kit is like 20 yrs newer? That is one company which I strongly dislike...

Despite a more recent date stamped on the box, the AMT F-16 is actually a bit older than the Revell. AMT reboxed a ton of ESCI/Italeri kits, including the one you have in your hands.

Yeah, true. I forgot about ESCI... well, Italeri is another manufacturer that irks me... Tongue [:P] Got the fuselage halves together, and let the puttying begin!

  • Member since
    December 2002
  • From: Midwest US
Posted by balta1 on Saturday, October 17, 2009 8:45 PM
What's up all! I've been traveling for the past couple months so I've not been able to work on my kit. I just got back into it yesterday and made some progress. I'll post some pics tomorrow.

Stir not the bitterness in the cup I have mixed for myself!

 

  • Member since
    October 2007
  • From: Bothell, WA
Posted by btp2k2 on Wednesday, October 14, 2009 10:09 PM

 Boba Fett wrote:
Ok. I got the seat out. The thing is a gem! I plan on adding to it, and modding the side consoles with the Revell parts. Why could'nt AMT do that? And the AMT kit is like 20 yrs newer? That is one company which I strongly dislike...

Despite a more recent date stamped on the box, the AMT F-16 is actually a bit older than the Revell. AMT reboxed a ton of ESCI/Italeri kits, including the one you have in your hands.

Paul I Like Tomcats!
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.