SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Official Natural Metal Finish Group Build II

266176 views
1792 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2009
  • From: hamburg michigan
Posted by fermis on Friday, January 21, 2011 11:26 PM

Redraider, "stang's coming along nice! I never get tired of seeing em!Yes

Casper, That is some MANtastic work there!!!

CallSignOWL

Fermis, you are very quick builder, and how do you paint so well? The airbrushing, for me, is one of the more stressful parts of the build. Your cockpit, too, is amazing.

 

 I'm not really that quick (I don't think, anyway), I just just have lots of time on my hands, and I'm a master of time management!!! It's winter time, got nothin else to do!!! As far as the painting...well, um, I really don't know, I'm usually daydreaming when I paint, and it seems to work outTongue Tied.

 Got it all marked up yesterday, let another gloss coat set, overnight. Spent today on the fiddly bits. Missiles need another sealing coat and I'm scratchin a boarding ladder. Finish pics should be in tomorrow, but for now, here's where I left off last night.

 

 I stepped outside this afternoon to bring in some firewood, and this little critter scared the crap outta me!

I fear I may have made a friend! The poor little guy was shivering soooo bad, it hurt my heart. I normally put a little lead in them....couldn't do it, he was hurt too. I got an blanket (and elbow deep leather gloves) out of the garage, caught him, wrapped him up and gave him some food, and got him nice and warm. I think he knew what was going on, no hissin, growling, or fighting, better than a kitty cat! Once he was warmed up, I set him loose....right back to the wood pile. Every time I'd step back out, he'd pop out. He hung out most of the day, gone now though.

  • Member since
    March 2010
  • From: Brisbane
Posted by Julez72 on Friday, January 21, 2011 11:36 PM

some stunning work going on in hereBow Down

Randy sorry for my absence lately things here have been busy...I'll be making a start on the B-29 this weekend and i hope to have the office done in a few days...pics soonYes

 

 

 

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Saturday, January 22, 2011 1:15 AM

Back atcha, Fermis!

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    January 2009
  • From: hamburg michigan
Posted by fermis on Saturday, January 22, 2011 9:38 AM

All done!!!

I'll post the rest of the pics in the A/C forum for all to see!

  • Member since
    March 2010
  • From: Brisbane
Posted by Julez72 on Saturday, January 22, 2011 5:58 PM

Fermis, very cool build...The subtle shading looks awesome, i'll have a go at post shading my next NMF i think...Thanks for sharingYesYesYes

 

 

 

  • Member since
    July 2008
  • From: USA California
Posted by vetteman42 on Sunday, January 23, 2011 12:53 AM

Redraider you are doin some very nice work, I like that fact that you removed the panel lines from the wings. They look more real to my eye that way. the yellow looks fine from where I am sitting. YesYes

Casper The pit looks FANTASTIC !! The colored PE really makes the detail stand out without over powering the detail.

 

fermis

 

 CallSignOWL:

 

Fermis, you are very quick builder, and how do you paint so well? The airbrushing, for me, is one of the more stressful parts of the build. Your cockpit, too, is amazing.

 

 

 I'm not really that quick (I don't think, anyway), I just just have lots of time on my hands, and I'm a master of time management!!!

http://i661.photobucket.com/albums/uu340/fermisb/2011/EE%20Lighning/004-2.jpg?t=1295673350

CallSignOwl now we know how Fermis builds em so fast and manages his time so well. His help is arriving for the day, a couple cans of Red Bull and this guy is zoomin, kind of like the squirrel in Over The Hedge 

Now Ricky don't forget to call in the secrets you learned so I can build as good as he does one day.

Fermis, seriously, a nice build you have there. I really like the shading and the way you have made the panel lines stand out. It truly does look as if it has seen some use. The scratched ladder in a great touch that really adds to the look of the build.

The front page has been updated with your build my friend.

Randy So many to build.......So little time

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Sunday, January 23, 2011 3:10 AM

I saw some pictures of the front of the Mirage dashboard and there seemed to be some sort of black mesh coverings under the windshield. I used some railway metal walkway parts as they had a nice sized appropriate mesh.

With a bit of flat black it looks effective

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, January 24, 2011 2:11 PM

Fermis: Ditto on the cool panel line shading. Another great all around build!

Casper: And another great looking cockpit on your Mirage.

 

Update: Pulled out the B-29 and got a little more work done on her. The Censored seam line on the top of the fusilage is giving me fits. Keep sanding and repainting it but there always seems to be a crack somewhere in it. I wonder if I'm flexing it while sanding and breaking parts of it. Still hope I'll be done painting soon. Bang Head

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Tuesday, January 25, 2011 6:38 PM

It literally took an hour and a half to scrape off the ridges on the exhaust. I forgot to take a comparative photo but you can probably imagine the work. But once the exhaust was dressed up with the Eduard PE it looked great. Shot a bit blurry but you can get the idea.

Some structural reinforcing, the fuselage tends to warp slightly inwards. And I remembered to weight the front this time!

Despite some of the parts having a lot of flash and pin marks and the sprues being not the best I've seen, the bird actually is coming together relativity cleanly. I will have minimal Milliputing to do as far as I can tell. There will be a bit of a gap where the top of the wing meets the fuselage but that will be about it.

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Tuesday, January 25, 2011 9:26 PM

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    March 2010
  • From: Brisbane
Posted by Julez72 on Tuesday, January 25, 2011 10:24 PM

Casper, awesome looking office buddy well doneYes i have the hobby boss Mirage IIIc half built which will eventually get markings for 75SQD...Hopefully i'll get it finished later on in the year...looking forward too seeing some more work from your endToast

 

 

 

  • Member since
    July 2008
  • From: USA California
Posted by vetteman42 on Thursday, January 27, 2011 10:38 AM

Casper that office is no less than top notch, very well done, Just goes to show what can be done with a " not so good kit " in the hands of a modeler.

Randy So many to build.......So little time

  • Member since
    September 2007
  • From: Crystal Lake, IL
Posted by firesmacker on Thursday, January 27, 2011 5:03 PM

Awesome job, Fermis!

I don't have as many WIP photos as I should. I took a bunch of photos of the 'pit but I think my wife might have deleted them thinking I had already uploaded the pics since I usually do it right away. You ain't missing much since the PE seat belts I used didn't want to sit flat against the seat back for anything.

I did her in overall Alclad II duraluminum and did some panels in dark aluminum for some contrast. I never tried to contrast panels so I'm not sure if it's too stark or not.. There are a few areas where I over sprayed with the flat black but the decals will cover that so I ain't worried.

The gear bay doors are also painted as well as the canopy and windscreen. I should have this one wrapped up pretty soon.

Thanks for looking. As always, any comments or suggestions are welcome.

Regards,

Jeff

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Thursday, January 27, 2011 7:21 PM

vetteman42

Casper that office is no less than top notch, very well done, Just goes to show what can be done with a " not so good kit " in the hands of a modeler.

Thanks Vetteman, I can see how much I have been improving with each kit. So far the Zero is my fave but the Mirage has errors present! Big Smile

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    July 2008
  • From: USA California
Posted by vetteman42 on Thursday, January 27, 2011 7:50 PM

Firesmacker from where I am sitting I would say its a very well done paint job Yes I would think a few more smaller panels done a bit darker would really set it off, it seems a bit too symmetrical to me. Just a thought not meant as a criticism by any means.

Casper from my own experiance mind you, I have never built a mistake free model, to be honeswt if I ever do build one I will probably give up the hobby because the challange would be gone, gone forever

Randy So many to build.......So little time

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Friday, January 28, 2011 7:39 PM

vetteman42

Casper from my own experiance mind you, I have never built a mistake free model, to be honeswt if I ever do build one I will probably give up the hobby because the challange would be gone, gone forever

BTW that last post of mine was meant to read "the Mirage has NO errors present!" I am extremely pleased with the way it's come together.

All Milliputting done and now leave it to dry. First undercoat applied tomorrow;

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Saturday, January 29, 2011 8:13 PM

Ok, so first two colours are on. A base coat of Light gray followed by some blue gray.

Next I'll do the dark gray for the nose and the yellow with black tiger camo for the tail fin. I want to be able to add the Mr.Colour metaliser over the top and not have to mask anything else around it after it's applied. It has a nasty habit of peeling off with tape.

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    March 2010
  • From: Brisbane
Posted by Julez72 on Sunday, January 30, 2011 4:11 AM

Casper, looking really nice there so farYes I must have missed a couple of posts and not caught the scheme your doing, Is it a Tiger meet scheme???

 

 

 

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Sunday, January 30, 2011 4:16 AM

Yep, Tiger camo on the tail, light gray underneath, dark gray nose, strip of blue gray around the cockpit and NMF across the top and the entire top of the wings.

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    March 2010
  • From: Brisbane
Posted by Julez72 on Sunday, January 30, 2011 4:39 AM

Yeah thats a cool scheme, are you adding the drop tanks on the finished build???

 

 

 

  • Member since
    July 2008
  • From: USA California
Posted by vetteman42 on Monday, January 31, 2011 12:44 AM

Casper cant wait to see this paint scheme are you planning to paint the tiger stripes ?

Randy So many to build.......So little time

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Monday, January 31, 2011 12:53 AM

Hi vetteman and Julez, yes I will be doing the tiger stripes on the fin and the drop tanks! I have cut out the paper templates nicely provided by Eduard but it's a shame they didn't include them as masks. They provided that for the ripped metal effect to be added to the wing so I am going to trace and cutout the shapes onto thick mask to stick on the wing to ensure perfectly crisp application without any feathering.

Drop tanks may prove more difficult...

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    July 2008
  • From: USA California
Posted by vetteman42 on Monday, January 31, 2011 1:03 AM

Casper will be watching closely Eats I have a 1/32 F-16C I want to do tiger stripes on, will be my first 1/32 scale too.

Guys and young lady, there have been a few asking if I am planning to host NMF III. The end of this one is still a few months off but I thought I would ask what you all think. Anyone want to see a round 3 ?

Randy So many to build.......So little time

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Monday, January 31, 2011 1:14 AM

Yeah that might be a good idea. Not sure if I can get my Thunderjet under way by the end of May with Semester 1 looming in a couple of weeks!

I'll be lucky to finish the Mirage now that my modelling is back to weekends now

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    March 2010
  • From: Brisbane
Posted by Julez72 on Monday, January 31, 2011 3:09 AM

Casper, thats a lot of masking, will look very cool when it's doneYes

Randy, you already know my answerToast The B-29 is obviously going to be my last for this GB but in reality i've only just scratched the surface of NMF and have at least 3 projects here that i would do in NMF III...I reckon let this one run it's course and start the next one abouth a month later....

 

 

 

  • Member since
    January 2010
  • From: Nebraska, USA
Posted by CallSignOWL on Monday, January 31, 2011 6:08 AM

I have a few more kits that are NMF in the stash, so I would not mind seeing a round 3.  Toast

 

OWL

------------------------

Now that I'm here, where am I??

  • Member since
    June 2009
  • From: Netherlands
Posted by kermit on Monday, January 31, 2011 10:36 AM

...but I thought I would ask what you all think. Anyone want to see a round 3 ?

ahem.....

H*LL YEAH!!!Yes

Richard

"Success is the ability to go from one failure to another with no loss of enthusiasm." - Sir Winston Churchill

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Monday, January 31, 2011 4:56 PM

vetteman42

Guys and young lady, there have been a few asking if I am planning to host NMF III. The end of this one is still a few months off but I thought I would ask what you all think. Anyone want to see a round 3 ?

By all means! May well be porting my remaining builds over there...depends what I decide to do between the Mossie and the PBJ. May try to squeeze in one more NMF.

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    April 2005
Posted by Thunderbolt379 on Monday, January 31, 2011 5:19 PM

Would love to see an NMF III -- I might actually get something finished! I'm on my biggest output schedule ever but the bench looks like a WWII factory and things are moving down as fast as they can...

M/TB379

http://worldinminiature.blogspot.com/

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Monday, January 31, 2011 5:32 PM

Ok, got all the masking done!! Around the wings, nose, tiger stripes etc.

Big job Stick out tongue

The H308 and H307 seem to be very similar in shade I was hoping for something a little darker for the nose so I mixed a few drops of Germany Gray into the airbrush. I also didn't want to waste the black leftover from the stripes so I did some panel pre-shading in prep for the metaliser coat. Once the tiger camo is dry I can mask off the fines to put down the Aluminum finish.

I think I just squeeze in with the 30% NMF component on this build. Wink

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.