Airfix Group Build 2011-2012

old??? all of these have just been released this year, and the year before!!

http://www.modelsforsale.com/listphotos/AA03014.jpg

http://www.oxoniansplasticfantastic.co.uk/ekmps/shops/powerinverters/images/airfix-1-72-model-kit-03053-focke-wulf-fw-189-77-p.jpg

http://www.modelhobbies.co.uk/shop/product_thumb.php?img=images/military72b/A02013.jpg&w=140&h=102

http://thetoyhq.com/shop/images/AX05021.jpg

http://www.jacksonsmodels.co.uk/images/_lib/airfix-a02019-arado-ar196-a2a3-172-scale-kit-37991-0-1313425598000.jpg

Current progress on the buffalo.

The struts were flimsy so it's gonna be wheels up on a base.

the real red baron

old??? all of these have just been released this year, and the year before!!

http://www.modelsforsale.com/listphotos/AA03014.jpg

http://www.oxoniansplasticfantastic.co.uk/ekmps/shops/powerinverters/images/airfix-1-72-model-kit-03053-focke-wulf-fw-189-77-p.jpg

http://www.modelhobbies.co.uk/shop/product_thumb.php?img=images/military72b/A02013.jpg&w=140&h=102

http://thetoyhq.com/shop/images/AX05021.jpg

http://www.jacksonsmodels.co.uk/images/_lib/airfix-a02019-arado-ar196-a2a3-172-scale-kit-37991-0-1313425598000.jpg

i'm not sure about the year, airfix did some new mold but don't remember none of these between new molds, ask the customer to show the box content, if are old molds is simply to check

New molds for sure are the bae hawk ,bf-110 the sabre, the mig-15, a bf-109 and the valiant and the new spitfire mk I.

For the p-40, the b version is new, the e version not and one of hurricanes

here the new boxes to safely get the good ones

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=53051

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=41146

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=37322

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=40704

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=36660

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=38442

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=38442

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=40705

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=39934

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=40615

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=40874

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=43213

http://www.mblmodellismo.it/dettaglio_articolo.asp?id=44581

One of my online customers specific when the kit is a new tooling.

theres also the harrier gr9 but not find the artbox

By me airfix is reboxing again some older kits with new package 

TD nice updated on buffalo  

the real red baron

old??? all of these have just been released this year, and the year before!!

http://www.modelsforsale.com/listphotos/AA03014.jpg

http://www.oxoniansplasticfantastic.co.uk/ekmps/shops/powerinverters/images/airfix-1-72-model-kit-03053-focke-wulf-fw-189-77-p.jpg

http://www.modelhobbies.co.uk/shop/product_thumb.php?img=images/military72b/A02013.jpg&w=140&h=102

http://thetoyhq.com/shop/images/AX05021.jpg

http://www.jacksonsmodels.co.uk/images/_lib/airfix-a02019-arado-ar196-a2a3-172-scale-kit-37991-0-1313425598000.jpg

Know your kit....

• 1:72 HE-111H-20 (A05021) - 1962
• 1:72 AR-196     (A02019) - 1966
• 1:72 BV-141     (A03014) - 1970
• 1:72 FW-189     (A03053) - 1970

TD4438

Current progress on the buffalo.

The struts were flimsy so it's gonna be wheels up on a base.

Looking good TD.  I love these old Airfix kits.  Reasonably accurate shapes that just need some old-fashioned modelling to make them look nice.  For the price they are a great way to hone skills.

Tim

Stayed up last night getting my Airfix.

Have I said this kit has been simple? A little Tamiya putty on the seams and some sanding. I thought that the barrel to the 7.5 was an oppurtunity that they passed up on. I drilled it out using dif xacto tips. I put a little was on some sections just to see them pop. I'm looking forward to researching some birds today. I'm not even going to try the orig decals and have enough spare ones to come up with something interesting.

On to my progress pics:

Nice looking Buffalo, TD; appealing shade of brown paint you're using.

Henschel looks to be moving right along, Noah.  As for the decals, depending on their age, sometimes Airfix decals go on and settle over the details better than some aftermarket ones.  If the kit-supplied ones don't work, you can always take them off and use something else.

It's probably not dark enough,but it's the closest shade I have.The buffalo is definately a nice kit so far.I hope the canopy fits reasonably well.Poor fitting canopies seems to be a hallmark of Airfix.

I am soooooo enjoying this!

I love hand painting camo.

Lovin this Arifix 1/72 HS129. Tonight I taped up and put in theater markings.:

Noah nice work on this nice kit i cannot disting details, panrl lines are reaised or good engraved?

The buffalo is looking great whit camo TD used citadel acrilycs?  A rivet counter question, the first star of the engine seems molded wrong ,airfix miss a cilinder  

My 1/72 C-337 (O-2a) is basically ready for painting, it will be back to brushpainting as I broke my airbrush:-(

Some "interesting" filling and sanding was needed on this little model.

I was palnong on doing it in the colours of the Rodhesian air Force, but there are to many mods to be done and I don't recon this model is worth the effort.

The decals for the USAF are very old and yellow so I will be painting it in a "what if South African Air Force" bush war sceeme with some left over SAAF decals.

Theuns

bsyamato. Raised panels lines. i missed some injector pin markings as well. I'm pondering how far to bring down the darker grey splinters on the sides. Without a working airbrush my splotches dont come out that well. This is why I havent done a German plane in a bit.

Theuns. Looking forward to the SAAF outcome.

Definitely i like this plane Theuns

Noah i hoped in engraved panel lines to build another 129 at low price built the really good italeri/revell ome years ago but with the price of it i can buy two airfix .... resignation

Noah T

Without a working airbrush my splotches dont come out that well.

Noah,

A member of my club uses the fine tipped Microbrush, size: Superfine.  I get mine at hobby shops.  I haven't tried them yet because it's been a very long time since I built a Luftwaffe subject, but he puts just a little bit of paint on the tip, almost like a dry-brush, then dabs the side.  It looks really good and he's done it on 144th as well as 72nd subjects. 

Tim

OK, off & running, officially!

I've started the Mirage F1c before my Heinkel 177. It's a 1/72 kit, and will be doubling up for the African Group Build.

• Raised panel lines & everything looks good shape-wise.
• There is a slight warp to the fuselage halves but nothing that some careful gluing can't fix.
• I'm going to try to use the oob decals (presently hanging in a sunny window to bleach them a little, Microscale decal film waiting!) for a South African Air Force machine.  If I can't salvage the originals I'll have to go aftermarket or print my own.
• lots of flash on the landing gear, but I think I managed to mostly clean that up, so I may not have to mount her "in-flight" as I planned.
• I will be deflecting the control surfaces slightly, including the all-flying elevators.

First pics! Only four years younger than me!

Elevator - note the long tab.

I've trimmed the tab in to the pivot point, leaving a little bit to mount with. I won't deflect them too much because I will likely still need to have some surfaces close enough together to glue. Now I need to fill in the gap in the fuselage slots. I may have to attach these before gluing the halves together...

Extended the cabin floor & attached a couple of styrene bits for the "pedals", stretched sprue for the control stick. (I still have some spares to dig through, I might find something better than what I will be scratching for this!)

The ejection seat (I could have sworn I took a before pic ). It actually had a decent shape, but needed some help! Masking tape belts and I used the loop off of a "beading needle" that I found at a local craft store. I know the actual seat has a two-loop gizmo for the "over the head ejection pulls" - I'm thinking I've got it close enough in 1/72!

The "beading needles" - 12 for $1? I can see me using these in more cockpits in the future, loop antennas etc.

Cut a little groove in the top of the seat so the loop looks like it is coming out of the headpiece rather than sitting on top.

All painted up, although I see a couple tiny spots that need a drip of paint:

That's all for now,

Greenshirt. I have the worlds most useless paintbrush (tiny). Thanks for the suggestion, build them like a broken up micro worm pattern....

Hey, the Henschel is coming along nicely Noah - for splotches in 1/72, I've used a Q-tip before with pretty good luck. You'd need to use enamels with it though, acrylics soak into it too quickly.

i was thinking of doing a splotch then hitting it with a thinner to feather or soften it out. It'd prbably be usless to try to cut a mask from blue tape.....

Anyone know a easy way to paint spirals on a spinner? That's be really sweet. The Hs 129 has twin (small0 radials o small cone spinners (molded directly on to props). Actually the relatively small size of this plane impressed me.

Looking good on that F-1AZ!

I have painted the first brush coat of dark earth on my C-337 and thought a second coat will be final.Yea right! I thinned the pait way to much and now it is all streaky

It seems my brush painting needs some work!

Theuns

Noah T

i was thinking of doing a splotch then hitting it with a thinner to feather or soften it out. It'd prbably be usless to try to cut a mask from blue tape.....

Anyone know a easy way to paint spirals on a spinner? That's be really sweet. The Hs 129 has twin (small0 radials o small cone spinners (molded directly on to props). Actually the relatively small size of this plane impressed me.

I finally tried painting the stripe instead of using decals on my last Bf109. I painted the spinner white, wrapped a thin strip of tape around it starting at the cannon muzzle & working my way to the rear of the spinner. Gave it a quick shot of matt coat (to lessen the chance of the top coat of paint bleeding through), then a couple of light coats of black-green.

Thats a great idea Vance and a very good looking bird. if that is 72nd scale what did you use for the wire?

Thanks Noah - that's actually a 1/48 Revell kit. The antenna wire is actually fishing line, 3-pound test I think, attached & then painted black. After a few days it seemed to sag a little, I may need to warm it up a bit to see if I can tighten it up again!

great scratchin work Vance the f-1 comes great with these extra works. Need to try your spiral paint tips on my 177 !!

bsyamato

great scratchin work Vance the f-1 comes great with these extra works. Need to try your spiral paint tips on my 177 !!

Well it's not award-winning, but it's better than what was there to start with, and I'm having fun with it. The "belt buckles" are just spots of paint of course, but look better to the eye than they do on the camera. (That's what I keep telling myself anyway!!!)

Both nice looking kits--the 109 and the Mirage.  Very creative use of those little loopy things.

Vance,

I fish all the time (Pensacola Florida area and mainly saltwater) and 3lb test is some light gear. I bet you could get smaller diameter line (if you wanted it) with braid instead of mono. For example some 30lb braid is as small as 10lb mono, and they make braid way down to 5lbs. It would be harder to keep taut, maybe spray like dullcote or something might stiffen it up. I'll tell you if you try to bring a green Cobia in by lifting the line (braid) and not by using a gaff you'll be sewing your palms back together.

Noah - Cobia? That thing looks like a little shark! I'm not a "serious" fisher, all I bother with is trout (mostly rainbow, some browns) up here, a few times a year with my father. I'll have a look around for some alternate sizes before all the supply shops switch their seasonal stuff out. I wonder if the braiding could actually trap some dullcote in between the strands to help keep it taught?!?!

checkmateking02 - Thanks! I was just killing time waiting for the wife in a craft store & spotted those loopy-things & realized they had a better purpose than "beading"!

A few little items worked on last night, nothing that would show in a photo though. More later this week,

Sorry guys guess I cant read Posted to the wrong group

well i finallty got started on my hawker hurricane, i made a nice scratch build cockpit and seatbelts etc. but i closed up the fuselage and then thought for a moment... doh! i forgot to take pics!

so the cockpit pics will not be as clear as they normally would... 

im almost up to the stage of paint but how to i go about makeing a camo paint job with a airbrush? do i spray a coat of brown on then mask out the camo print then spray the green??

how to i mask canopies ive never really been good at masking the canopies. (keep in mind this is 1:72)

Thanks

well here are the pics:

I also had to scratch build something to be suitable as wheel wells, since if i hadnt done this you would see right through to the bottom of the cockpit.