SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Third Annual Berny Memorial Group Build

96044 views
1373 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Wednesday, June 25, 2014 10:02 PM

Matt-Joachim

Sorry, I cannot enter my BF109 as the other group does not allow crossovers. I do however want to enter my Revell 1:48 A-10 Thunderbolt instead! Sorry for the mix up(im very new to this)

No problem at all Matt.  Smile  I will change the roster.

Ken

  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Wednesday, June 25, 2014 9:58 PM

castelnuovo

Well, lets call this one 99.9% done. The remaining 0.1% is the antenna which wasn't provided. Instead, the instructions advised to stretch your own sprue. So I am still trying to get that right.

Comments, jokes etc all welcome...Smile

Nice job Castelnuovo!  The weathering turned out great!  Yes  Yes 

Ken

  • Member since
    January 2011
  • From: Commonwealth of Virginia
Posted by Tal Afar Dave on Wednesday, June 25, 2014 9:49 PM

Good job on the T-55!  Don't sweat the stretched sprue too bad.  Use a candle, hold your sprue a couple of inches above the flame and rotate slowly to ensure heating the plastic all the way through.  When the plastic starts to get shiny, it's time to stretch.  Take it away from the flame and start pulling with even pressure from both hands.  If you want thin sprue pull quickly, for thicker sprue pull slower.  It's not that hard, and most of us have plenty of sprue laying around.

Good luck!

Dave W.

2022 New Year's Resolution:  Enter 1 group build and COMPLETE a build this year!!  Why Photobucket did you rob me of my one Group Build Badge???  Must be part of the strong anti-Monogram cartel!!!

 ]

  • Member since
    June 2014
Posted by Matt-Joachim on Wednesday, June 25, 2014 12:25 PM

Sorry, I cannot enter my BF109 as the other group does not allow crossovers. I do however want to enter my Revell 1:48 A-10 Thunderbolt instead! Sorry for the mix up(im very new to this)

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, June 25, 2014 7:39 AM

CN: Very nice work! I still need to learn how to stretch sprue effectively, I normally just use a thin wire for the antenna.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    July 2008
  • From: Vancouver, the "wet coast"
Posted by castelnuovo on Wednesday, June 25, 2014 12:58 AM

Well, lets call this one 99.9% done. The remaining 0.1% is the antenna which wasn't provided. Instead, the instructions advised to stretch your own sprue. So I am still trying to get that right.

Comments, jokes etc all welcome...Smile

  • Member since
    April 2012
  • From: USA
Posted by Striker8241 on Tuesday, June 24, 2014 6:04 AM

Son Of Medicine Man

Striker8241

Hey, Guys, here's an Air Force song you may not have heard in a long time. Sure takes me back Smile.

http://www.youtube.com/watch?v=pos1BzW_t2A

BTW, this was posted on the UK USAF Special Interest Group (SIG) site. I've been a member there for some time now. Great bunch of guys and some interesting builds and techniques. Check em out. http://www.usaf-sig.org/Forum/

Cheers,

Russ

Hi Russ,

Cool video!  Here is my USAF favorite.  I was in the Dover AFB High School Band and we played it at every performance!

BTW, I signed up for the UK USAF Special Interest Group.  Thank you for providing that link!

Ken 

Hi, Ken!

Great video!  That's the first time I've seen all the lyrics for that song!  Thank you!

And you're welcome for the link. Big Smile

Russ

 

  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Monday, June 23, 2014 4:30 PM

jimbot58

Came off my 60+ hour work week for my only day off and found that today, I'm all but useless. I have been here and there working on the 101 decals in the evenings when I can, but I'm having to spend the day today mostly catching up the domestic chores. How one person can seem to generate so many dishes and dirty laundry, garbage and assorted grime I can't comprehend! Makes me appreciate Mom all that much more!

It never fails that when there are added funds coming in, something has to break.

I am losing an external HD and had to replace it, and have been working to move a lot of music and other files from the old to the new, as the old drive works for an hour, or 2 or 15 minutes, or whatever and have to then unplug and restart the drive again and again. I think I have managed to save most of the stuff I wanted the most, but hopefully I can finish before it quits completely. Didn't seem like I really had that much on it to begin with, but it's just tedious to move what is there.

The other thing I had to replace is a USB hub. The one I have now has only one port that still works and I have been using it to charge all my toys ( phone, camera, mp3 player, etc) I am forever switching cables. I was fortunate to run across a 7 port powered hub on sale so hopefully I can service all toys as needed. As to those adaptors that plug in the wall, I can never seem to keep track of those or be able to find an available outlet anyway.

I'll have to see if I can get a few WIP photos to post this evening.

Jim

That always seems to be the case for me too Jim!  I work those extra computer jobs and it always seems to be just in time to pay for something else than what I was planning for.

Ken

  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Monday, June 23, 2014 4:28 PM

Gamera

Hey Bish, as you've probably noticed by now we do tend to wander a little off subject from time to time... lol

Matt: Welcome aboard!

Yeah, something like a drunk trying to walk a straight line!!  Big Smile 

Ken

  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Monday, June 23, 2014 4:27 PM

Matt-Joachim

corsair in 1.48 of course... my ad

Hi Matt!

I added the Revell 1/48 A-7A Corsair II to your list.  A real workhorse of a plane!

Ken

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, June 23, 2014 4:25 PM

Son Of Medicine Man

Bish

I love reading through this GB, the topics covered is never ending, just what makes this forum the place it is.

I hate having hair. I have had a crew cut since my late teens. I started going thin on top in my late 20's and about 10 years or so ago started shaving my head about once a week. I really like being fully bald and if I let my hair grow a bit, I over heat really quickly in the summer or when I am doing anything strenuous.

If you got the head for it, I think the bald look can look pretty bad ass!

Ken

It can do. being a touch over 6 foot and of a 'bulky' build does help. Not sure I'd call it bad ass but I think it suits me.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, June 23, 2014 4:23 PM

Gamera

Hey Bish, as you've probably noticed by now we do tend to wander a little off subject from time to time... lol

Matt: Welcome aboard!

O don't worry, I am well used to it in the Longest day GB. I actually ;like the fact that we can wander off and discuss other things besides models and have a bit of fun and get to know each other better.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Monday, June 23, 2014 4:20 PM

Striker8241

Hey, Guys, here's an Air Force song you may not have heard in a long time. Sure takes me back Smile.

http://www.youtube.com/watch?v=pos1BzW_t2A

BTW, this was posted on the UK USAF Special Interest Group (SIG) site. I've been a member there for some time now. Great bunch of guys and some interesting builds and techniques. Check em out. http://www.usaf-sig.org/Forum/

Cheers,

Russ

Hi Russ,

Cool video!  Here is my USAF favorite.  I was in the Dover AFB High School Band and we played it at every performance!

BTW, I signed up for the UK USAF Special Interest Group.  Thank you for providing that link!

Ken 

  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Monday, June 23, 2014 3:55 PM

Bish

I love reading through this GB, the topics covered is never ending, just what makes this forum the place it is.

I hate having hair. I have had a crew cut since my late teens. I started going thin on top in my late 20's and about 10 years or so ago started shaving my head about once a week. I really like being fully bald and if I let my hair grow a bit, I over heat really quickly in the summer or when I am doing anything strenuous.

If you got the head for it, I think the bald look can look pretty bad ass!

Ken

  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Monday, June 23, 2014 3:51 PM

jimbot58

I was in my early 20's when mine started to go. I think the only thing that would make me attractive to a 20 year old at this stage of my life would be a large bank roll. I keep waiting for that sack of money to fall off that armored car, but it just doesn't seem likely to happen anytime soon.....

I hear you Jim.  I keep hoping to win the lottery.  Big Smile 

Ken

  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Monday, June 23, 2014 3:50 PM

mikeymize

Hey Cliff I hear ya on the wind in your hair thing. I'm clinging desperately to every follicle I have left too. I've always been jealous of those who have as much in their 40's as they did in their 20's! Forget about cancer, I have to get working on a cure for baldness; instant multi- millionaire! That and a pill to make us old guys attractive to 20 something gals!

Hey Mike,

I could totally go for a pill that makes me attractive to 20 something gals!  Let me know when you have that figured out!  Big Smile 

Ken

  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Monday, June 23, 2014 3:48 PM

Gamera

H.A.T. - lol, works for me. 

BTW: Squadron is running the Encore Models 1/48th F-102A on sale for thirty-two bucks though Sunday. Dunno if anyone is interested or the kit is any good but thought I'd point it out. 

LINK

Thank you for the heads up on that kit Cliff!  I am always looking for a good deal.

Ken

  • Member since
    November 2010
  • From: Lafayette, Indiana
Posted by Son Of Medicine Man on Monday, June 23, 2014 3:46 PM

jimbot58

It's called Hair Augmentation Therapy or H.A.T.

Guess I'm not the only one that goes in for a "Fringe Trim" at the barbers every 6 weeks or so?

That was totally funny Jim!

Ken

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, June 23, 2014 7:40 AM

Jim: The decals and the lights look great to me. Thanks for reminding me, there's enough detail there I keep thinking she's 1/48th!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    June 2009
Posted by jimbot58 on Monday, June 23, 2014 3:53 AM

I promised some photos, so here are a few for now.

Decals...

More decals...

Pretty much everything on the right is done. Now on to the left:

Also, I should show you my lower fuselage lights. I painted the cavities with gloss white and when that was dry, I added a couple of tiny points of silver to simulate the bulbs there. Then a drop of clear epoxy carefully added to fill it flush and give it the appearance of clear lenses.

I know the detail always looks kind of funky this close, but when you view it by eye at 1/72 scale, it looks a lot different.

Jim

*******

On my workbench now:

It's all about classic cars now!

Why can't I find the "Any" key on my keyboard?

 

 

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Sunday, June 22, 2014 9:38 PM

Jim: Good luck with all your hardware issues there- I really, really, really need to backup my HD. I'll probably wait till something goes wrong with it though...

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    June 2009
Posted by jimbot58 on Sunday, June 22, 2014 5:09 PM

Matt-Joachim

I would also like to enter my revell a7 II corsair

I would enjoy seeing your A7. I am a fan of them.

Jim

*******

On my workbench now:

It's all about classic cars now!

Why can't I find the "Any" key on my keyboard?

 

 

 

  • Member since
    June 2009
Posted by jimbot58 on Sunday, June 22, 2014 5:06 PM

Ken did I ever actually furnish a photo of the Growler for the "Wall of Fame"? I didn't see one up there. I think I intended to work on one but never got a round tuit. Seems I never have enough of them:

Jim

*******

On my workbench now:

It's all about classic cars now!

Why can't I find the "Any" key on my keyboard?

 

 

 

  • Member since
    June 2009
Posted by jimbot58 on Sunday, June 22, 2014 4:58 PM

Came off my 60+ hour work week for my only day off and found that today, I'm all but useless. I have been here and there working on the 101 decals in the evenings when I can, but I'm having to spend the day today mostly catching up the domestic chores. How one person can seem to generate so many dishes and dirty laundry, garbage and assorted grime I can't comprehend! Makes me appreciate Mom all that much more!

It never fails that when there are added funds coming in, something has to break.

I am losing an external HD and had to replace it, and have been working to move a lot of music and other files from the old to the new, as the old drive works for an hour, or 2 or 15 minutes, or whatever and have to then unplug and restart the drive again and again. I think I have managed to save most of the stuff I wanted the most, but hopefully I can finish before it quits completely. Didn't seem like I really had that much on it to begin with, but it's just tedious to move what is there.

The other thing I had to replace is a USB hub. The one I have now has only one port that still works and I have been using it to charge all my toys ( phone, camera, mp3 player, etc) I am forever switching cables. I was fortunate to run across a 7 port powered hub on sale so hopefully I can service all toys as needed. As to those adaptors that plug in the wall, I can never seem to keep track of those or be able to find an available outlet anyway.

I'll have to see if I can get a few WIP photos to post this evening.

Jim

*******

On my workbench now:

It's all about classic cars now!

Why can't I find the "Any" key on my keyboard?

 

 

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Sunday, June 22, 2014 4:36 PM

Hey Bish, as you've probably noticed by now we do tend to wander a little off subject from time to time... lol

Matt: Welcome aboard!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    June 2014
Posted by Matt-Joachim on Sunday, June 22, 2014 12:34 AM

corsair in 1.48 of course... my ad

  • Member since
    June 2014
Posted by Matt-Joachim on Sunday, June 22, 2014 12:33 AM

to be honest i dont know how the p61 of mine is going to turn out

:/

  • Member since
    June 2014
Posted by Matt-Joachim on Sunday, June 22, 2014 12:32 AM

I would also like to entet my revell a7 II corsair

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Saturday, June 21, 2014 2:05 PM

mikey, accepted.

And shave it all off and be done with it. No need for haircuts or washing your hair, and the girls love it. My other half says I look younger when I have shaved it.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    September 2010
  • From: California
Posted by mikeymize on Saturday, June 21, 2014 1:44 PM

Also, Jim, that's the beauty of my plan. I get to cure my own receding hairline as well as become filthy rich.  Problem solved. Bring on the 20 something girls! Just have to keep my present girlfriend in the dark.

"Time you enjoy wasting is not wasted time".


JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.