SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

SPITFIRE GROUP BUILD 2007-2008

119055 views
2048 replies
1 rating 2 rating 3 rating 4 rating 5 rating
jwb
  • Member since
    February 2006
  • From: Parkton, NC
Posted by jwb on Thursday, May 3, 2007 12:52 PM

Here's another good pic:

Notice the gear indicators and air inlet at the wing root also. 

Jon Bius

AgapeModels.com- Modeling with a Higher purpose

"For I know the plans I have for you," declares the Lord, "plans to prosper you and not to harm you, plans to give you hope and a future." ~ Jeremiah 29:11

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Thursday, May 3, 2007 1:11 PM
Another great shot.  you desrve a Borat quote too. " I am so excIte!"Whistling [:-^]

Marc  

  • Member since
    August 2006
  • From: The Great State of Wyoming
Posted by wyoroy on Thursday, May 3, 2007 11:07 PM

Sign - Welcome [#welcome] to the new members of the GB.

Daren, I have decided to build a 1/48 Tamiya MK1,  At least thats the plan so far.

Roy

Roy (Capt. Wyoroy FAAGB/USNFAWGB)

John 3:16

  • Member since
    November 2005
Posted by Anonymous on Friday, May 4, 2007 12:24 AM
 jwb wrote:

What's cool is it has parts for both types of trop filters.... the Vokes and the Aboukir.

And since I need to have Spitfires built with both types, I guess I better go back and get another one....

It is only fair that you build both!

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Friday, May 4, 2007 6:29 AM

 harvs73 wrote:
Marc, I can definately suggest you go to http://www.aussiemodeller.com/ and have a search through the discussion board there. Some very knowledgeable ppl have commented on the colours of RAAF Spitfires over the years.

Dave you hit the nail on the head with this one.  Got lots of info already.

Marc  

jwb
  • Member since
    February 2006
  • From: Parkton, NC
Posted by jwb on Friday, May 4, 2007 2:29 PM
 Andy in West Oz wrote:
 jwb wrote:

What's cool is it has parts for both types of trop filters.... the Vokes and the Aboukir.

And since I need to have Spitfires built with both types, I guess I better go back and get another one....

It is only fair that you build both!

Exactly! That's what I keep telling my wife. For some reason her eyes roll and she just shakes her head....

(But she doesn't mind.... that's the key! Wink [;)]

Jon Bius

AgapeModels.com- Modeling with a Higher purpose

"For I know the plans I have for you," declares the Lord, "plans to prosper you and not to harm you, plans to give you hope and a future." ~ Jeremiah 29:11

  • Member since
    August 2003
Posted by triumf on Friday, May 4, 2007 3:45 PM

Feels like a freud here...haven`t started any for the group as yet, and neither decided on which yet. but what the heck,I`ll post some picks of what I have made of the mark earlier.

Its some Tamiyas: 2 MkI and a MkV

An academy MkXIV

and a few Airfix. Mk22 an Seafire Mk 46 and 47

and the lot:

And thats the Spits I`ve got sofar...one thing`s for sure...there will be more of Mitchell`s wonder in my shop

life begins at 200 On the bench: RAF Ventura Tomcat 1\32 for my son Photo Sharing and Video Hosting at Photobucket Photo Sharing and Video Hosting at Photobucket
  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Friday, May 4, 2007 3:54 PM

triumf.... thats some nice looking work you got there.  Great collection

 

HEY JON.... you got some catchin' up to doBig Smile [:D]

Marc  

  • Member since
    December 2002
  • From: A secret workshop somewhere in England
Posted by TANGO 1 on Friday, May 4, 2007 5:01 PM

Triumf!

That is a superb collection you have there! Very pleasing work my friend.Wink [;)]Thumbs Up [tup] You are another of the Spitfire fanatics! Welcome to our club.Thumbs Up [tup]

Regards, Darren. C.A.G. FAA/USNFAW GB
  • Member since
    December 2002
  • From: A secret workshop somewhere in England
Posted by TANGO 1 on Friday, May 4, 2007 5:19 PM

Gentlemen, I propose a toast................

To those who flew against the odds, to the few, to us who still remember.

Cheers!Make a Toast [#toast]

And in honour of the fine modellers here ,Big Smile [:D] some end of the week humour! Its the weekend!Party [party]Captain [4:-)]Big Smile [:D]Party [party] CHEERS!Wink [;)]Make a Toast [#toast]Make a Toast [#toast] Laugh [(-D]Laugh [(-D]

Regards, Darren. C.A.G. FAA/USNFAW GB
  • Member since
    December 2002
  • From: A secret workshop somewhere in England
Posted by TANGO 1 on Friday, May 4, 2007 6:00 PM

Just found this on a British site and felt compelled to share it with you. Its men like this that make me so very proud of my country and the brave souls that defend it.

Gentlemen,
Please join me in paying respect to a true hero,one who we owe dearly.
RIP Sir.

SHOT DOWN FIVE TIMES, A PRISONER OF THE NAZIS, THE AMAZING LIFE OF A TRUE BRITISH HERO

link

BY TINA ROWE T.ROWE@BEPP.CO.UK

08:00 - 04 May 2007

As an RAF Spitfire pilot during the Battle of Britain, Sergeant Pilot Iain Hutchinson was shot down five times, had to bail out twice, and destroyed at least three, and possibly six, enemy aircraft.

During those terrible six weeks in the summer of 1940 an RAF pilot could expect to survive no more than 87 hours in the air, as Britain fought for its life against a German airforce that outnumbered the RAF by 4-1.

But through skill, and luck, the young pilot beat the odds, even managing to bail out when his plane was shot down in flames following an action over south west London.

He survived to fly reconnaissance missions over Norway, before being shot down again and spent the rest of the war in Stalag Luft III, the prisoner of war camp famous for the Great Escape.

Now, nearly 67 years later, Mr Hutchinson - retired Squadron Leader, and one of the last remaining links with the historic battle - has died, aged 88, at Dorset County Hospital, Dorchester.

He died on the day and to the hour that the restored Battle of Britain Memorial Flight of a Lancaster bomber accompanied by a Hurricane and Spitfire took to the skies over London once again.

Family and friends will gather in his home village of Charminster, near Dorchester, next Tuesday to celebrate his life. His funeral service will take place at 2.30pm at St Mary's Church.

Speaking of his extraordinary escape when he was shot down in flames on September 30, 1940, he said: "Flames were coming out of the plane and I was being frizzled. The next thing I knew, I was floating free in the air. I couldn't see very well because my face had been burned. I pulled my ripcord - my parachute was there - but it was rather late and I hit the ground with a thud."

He was treated for burns at RAF Hospital Uxbridge, where he was one of the last to receive tannic acid treatment.

"The acid produced great scabs that covered my face and legs while the whites of my eyes turned red," he added.

Born in Glasgow in 1918, Mr Hutchinson joined the RAF Volunteer Reserve in May 1938 and, when war was declared in September 1939, was sent for advanced pilot training. He joined 222 Squadron at Duxford, initially flying Blenheim Mk 1s, and then, from May 1940, flying his beloved Spitfire ZD-W, he took part in defensive patrols over Dunkirk.

In July the squadron moved to Hornchurch and into the thick of the battle. He recalled: "When we were moved south we had a lot to learn. On our first sortie we lost half the squadron."

His official score for the Battle was three Messerschmidt 109s confirmed destroyed, one Heinkel 111, one Messerschmidt 109 and one Messerschmidt 110 probably destroyed, and one 109 damaged.

He shot down German ace Oberleutenant Eckhardt Priebe, who survived and the pair were reunited at an 80th birthday lunch at the RAF Club in 1998.

When finally captured by the Luftwaffe in Norway, an officer greeted Mr Hutchinson in perfect English with the words: "We've been waiting for you for a while and I'm afraid our coffee is cold but have some schnapps instead."

Mr Hutchinson moved to Dorset because of his work for the Atomic Energy Authority at Winfrith. He specialised in site monitoring and inspection and was later seconded to the International Energy Agency in Vienna.

He returned to Charminster on his retirement in 1982 and was active in the community and church life.

A supporter of the Battle of Britain Association, his family say he was privileged to be counted "one of the few".


Rest In Peace Sir,
And thank you


 

Regards, Darren. C.A.G. FAA/USNFAW GB
jwb
  • Member since
    February 2006
  • From: Parkton, NC
Posted by jwb on Friday, May 4, 2007 8:33 PM
 wing_nut wrote:

triumf.... thats some nice looking work you got there.  Great collection

 

HEY JON.... you got some catchin' up to doBig Smile [:D]

No kidding! Wink [;)]

triumf- great to see another Spitfire fan joining the club! Very nice work on all of those! 

Jon Bius

AgapeModels.com- Modeling with a Higher purpose

"For I know the plans I have for you," declares the Lord, "plans to prosper you and not to harm you, plans to give you hope and a future." ~ Jeremiah 29:11

  • Member since
    August 2006
  • From: The Great State of Wyoming
Posted by wyoroy on Friday, May 4, 2007 9:26 PM

Darren, you should be very proud of Mr. Hutchinson and all those who flew with him.

Have a great weekend with the family my friend.

Roy

Roy (Capt. Wyoroy FAAGB/USNFAWGB)

John 3:16

  • Member since
    August 2006
  • From: The Great State of Wyoming
Posted by wyoroy on Friday, May 4, 2007 9:28 PM

triumf, fine collection of aircraft you have there.  Well done my friend.

Roy

Roy (Capt. Wyoroy FAAGB/USNFAWGB)

John 3:16

  • Member since
    November 2005
Posted by Anonymous on Friday, May 4, 2007 9:29 PM

Great collection, Triumf!

Here's to the few.

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Saturday, May 5, 2007 12:32 AM

I have slowed down a bit on the ICM Mk XVI, tied myself in knots working up some masks for the Spitfire camouflage.  I scanned the drawing from a Camoflage and Markings booklet on the Spitfire and then imported it into AutoCad so I could more easily redraw and then rescale them.  Matching up the wing and side masks takes a little rework once they are being stuck to the model, but it wasn't too hard.  Hopefully I will gain a little time on future Spitfire models, and I can easily resize them to any scale I need.  I drew in the panel lines as well as the demarcations for the camouflage.  This is the A scheme, which according to all I have for information, would be the pattern applied to all Mk XVI's at the factory.  I don't call myself a rivet counter, but I suspect I am pretty far into my navel here.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Saturday, May 5, 2007 7:49 AM

John- I like your masking idea!  Especially the little slots cut for the tape to hold them down, gotta remember that one!

Darren- Thanks for sharing that story about Mr. Hutchinson, a very touching story indeed. 

Triumf- Great looking collection!  Looks like Jon has some catching up to do. Wink [;)]

 

Frank 

 

jwb
  • Member since
    February 2006
  • From: Parkton, NC
Posted by jwb on Saturday, May 5, 2007 7:50 AM
 jeaton01 wrote:

I have slowed down a bit on the ICM Mk XVI, tied myself in knots working up some masks for the Spitfire camouflage.  I scanned the drawing from a Camoflage and Markings booklet on the Spitfire and then imported it into AutoCad so I could more easily redraw and then rescale them.  Matching up the wing and side masks takes a little rework once they are being stuck to the model, but it wasn't too hard.  Hopefully I will gain a little time on future Spitfire models, and I can easily resize them to any scale I need.  I drew in the panel lines as well as the demarcations for the camouflage.  This is the A scheme, which according to all I have for information, would be the pattern applied to all Mk XVI's at the factory.  I don't call myself a rivet counter, but I suspect I am pretty far into my navel here.

When I bought a Tamiya Mk. V the other day, it came with a 48th scale line drawing of the camo, and I thought about doing the same thing. Thanks for the inspiration! Looks great. 

Jon Bius

AgapeModels.com- Modeling with a Higher purpose

"For I know the plans I have for you," declares the Lord, "plans to prosper you and not to harm you, plans to give you hope and a future." ~ Jeremiah 29:11

  • Member since
    November 2005
Posted by Anonymous on Saturday, May 5, 2007 9:01 AM

By golly that's a great idea for masking!

  • Member since
    August 2006
  • From: The Great State of Wyoming
Posted by wyoroy on Saturday, May 5, 2007 9:09 AM

Sign - Ditto [#ditto] I read about masking like that but the slots to tape it down are brilliant Make a Toast [#toast]

Roy

Roy (Capt. Wyoroy FAAGB/USNFAWGB)

John 3:16

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Saturday, May 5, 2007 9:43 AM
My original plan was to make the masks continuous over the airplane from left to right (or right to left if you are biased that way).  It was going to be too time consuming to do that in Autocad, so I didn't.  As I look at the model, I think if I tape the parts together a little more securely and remove them carefully after I'm done painting, I can scan them again and redraw them so next time fitting them to the model will be easier.  I will try that.  As for the slots and the taping, I've always done it that way and I'm sure I must have copied it from someone else.  I ain't brilliant.  Tarnished, maybe!

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Saturday, May 5, 2007 11:00 AM
If you really do make a copy of the mask for future use... and if I ask real nice.... PRETTY PLEASE... any chance to get a copy?

Marc  

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Saturday, May 5, 2007 1:02 PM
Woohoo!  Got my Airfix Seafire Mk.46/47 in the mail today!  Has anyone built this aircraft before, and is there anything I should be wary of with it?  Looks like it comes with lots of extra parts, always welcome!

Frank 

 

jwb
  • Member since
    February 2006
  • From: Parkton, NC
Posted by jwb on Saturday, May 5, 2007 1:21 PM

 Daywalker wrote:
Woohoo!  Got my Airfix Seafire Mk.46/47 in the mail today!  Has anyone built this aircraft before, and is there anything I should be wary of with it?  Looks like it comes with lots of extra parts, always welcome!

There are two reviews on ModelingMadness.com, both of which are a bit old. Still, might be good to read. The FR.46 is here, and the FR.47 is here. Here's another on someones personal website.

I've got the same kit, but have not built it. I have heard quite a bit of good talk on it though. Many I've heard say it's one of the best kits Airfix ever put out. 

Jon Bius

AgapeModels.com- Modeling with a Higher purpose

"For I know the plans I have for you," declares the Lord, "plans to prosper you and not to harm you, plans to give you hope and a future." ~ Jeremiah 29:11

  • Member since
    December 2002
  • From: A secret workshop somewhere in England
Posted by TANGO 1 on Saturday, May 5, 2007 3:14 PM
 jwb wrote:

 Daywalker wrote:
Woohoo!  Got my Airfix Seafire Mk.46/47 in the mail today!  Has anyone built this aircraft before, and is there anything I should be wary of with it?  Looks like it comes with lots of extra parts, always welcome!

There are two reviews on ModelingMadness.com, both of which are a bit old. Still, might be good to read. The FR.46 is here, and the FR.47 is here. Here's another on someones personal website.

I've got the same kit, but have not built it. I have heard quite a bit of good talk on it though. Many I've heard say it's one of the best kits Airfix ever put out. 

 

Chaps, it is the very best Airfix ever made. I have built it and as chance has it I have also just bagged one too!!

It goes together really well, two things to watch out for though:

1. The canopy glazing is a bit on the thick side.

2. If you build the Korean war version be sure to paint a white background for the invasion stripe decals as they are near transparent.

It does'nt have much of a detailed office either if memory serves, but small gripes aside-its a lovely little kit.Thumbs Up [tup]

Regards, Darren. C.A.G. FAA/USNFAW GB
  • Member since
    December 2002
  • From: A secret workshop somewhere in England
Posted by TANGO 1 on Saturday, May 5, 2007 3:44 PM

You fella's got me thinking about a kit I did some years back. Its the Airfix Mk.22/24 which shares the same airframe as the Seafire 46/47.

I lifted these pics off the ARC gallery (I have many Spits there.) and thought, "Now thats not too bad!"

Anyway, it'll give you guys an idea of how she builds up. This is a RAF machine in the colours of No.603 City of Edinburgh Sqn. These fighters were not NMF, they were painted High Speed Silver.

Anyway, I don't own this one anymore, it lives with a old friend of mine. I presented it to him after hearing a most outlandish story that just maybe be true............

He claims, that a Mk.24 Spitfire broke the sound barrier before the Bell X-1 did it. Its a long tale and there is no evidence whatsoever to support it, however its like folk-lore and when you hear him tale the tale in a pub on a cold winters night and you stagger home wondering "Could it possibly be true?"Wink [;)]

We'll never know..............

Right, enough of that. Here's some pics of a model.







Regards, Darren. C.A.G. FAA/USNFAW GB
  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Saturday, May 5, 2007 4:02 PM

 wing_nut wrote:
If you really do make a copy of the mask for future use... and if I ask real nice.... PRETTY PLEASE... any chance to get a copy?

No problem, Marc.  I'll probably post the result here.  The model I'm doing right now has the cut down rear fuselage, but I have the other flavor too so I'll makie that version also.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    February 2006
  • From: Smithers, BC, Canada
Posted by ruddratt on Saturday, May 5, 2007 4:24 PM
Darren, that's gotta be one of the wildest looking Spits I've ever seen! Looks great in a NMF. Well done, my friend! Thumbs Up [tup]

Mike

 "We have our own ammunition. It's filled with paint. When we fire it, it makes pretty pictures....scares the hell outta people."

 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Saturday, May 5, 2007 4:51 PM
Darren- Love that silver finish!  Thanks for posting pics.

Frank 

 

  • Member since
    December 2002
  • From: A secret workshop somewhere in England
Posted by TANGO 1 on Saturday, May 5, 2007 5:07 PM

Mike, Frank,

thanks fella's! She's a pretty one isn't she? Wink [;)]

Regards, Darren. C.A.G. FAA/USNFAW GB
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.