1/35 DML T19 105mm HMC, WIP, 01/02/11, Complete

Links arent working for me Mike

OOPS......fixed

Rounds Complete!!

Working now and wow, nice progress!! Those bogey assemblies look soo fragile on US halftracks to me.

Jester - Thanks for stopping in and for the catch on the photos. In 1/35 those bogies are pretty fiddly.....I will admit the Dragon kit does a good job with them!

Rounds Complete!!

Very nice progress Mike, I really like the looks of things so far.  There's a lot of PE work there.

Just a note for the next one you do, as it's probably tough to get in there now. It looks like you have the bogie tire rubber painted on the inside surface, the inside of those bogie wheels should be OD or even better yet, worn steel like you've painted the sprocket surface.

If you look carefully at the kit parts, Dragon do have the demarcation line where the tire and rim meet, the rim wraps up to about the tire face in order to ride on the steel track guides down the center of the track.

I'm not trying to take anything away from your work, Just some food for thought for a detail oriented guy like yourself. This is one of those small details that may never be seen depending on how much weathering you do, or it could be one of those details that jump out at you at a show when they break out those little flashlights.

As for the bogie assemblies being fragile, they certainly are a bit but once you've done a few you get used to them. I even assemble them and disassemble them for painting/weathering throughout the build process.

'Ya got my attention up Mike.

Making real good progress on this one Mike!

Nate

Ken - OK....it may not be easy but I think it is doable....I will give it a go...Thanks for the tip. The video is great, I was thinking through how to get the track on...that was great help. Thanks

Steve - Hummm, as long as we are not looking for winter nuts.....he is welcome!!

Thanks for stopping in!

Nate - Thanks for stopping by and the comments.

Rounds Complete!!

So Mike you think I should save my money when it comes to the PE?

Tony Lee

Tony - Well....I try not to. The older kit benifit more from PE than the newer kits...IMO

Rounds Complete!!

Nice work on the interior details and the suspension Mike. I hear you about the Griffon PE sets...sometimes they fall into the trap of "kitchen sink" sets in terms of what they create for the DML kits and the end result is that some of the sets are over-stuffed with things that don't truly need to be there per se.

Bill- Thanks for stopping by. I normally stay away from the "super" kit PEs but I figured I would give it a shot .....Won't do that again!!!....Lots of metal in a drawer

Thanks for stopping by. I know time is short for you these days so it is really appreciated....

Rounds Complete!!

Sorry Mike... no words to describe this latest project of yours... I can only drool...

Mike, great work.  You always manage to remind me of the next upcoming show.  I just thought to myself, " OH baby, can't wait to see that at M-Con."

Kevin, great pic.  Wait 'til he realizes he will look like that again in 80 years.  that will wipe the smile right off his face.

Kevin - LMAO......yep..the Mrs. does call me drooly somtimes    Thanks for stopping by, always love your comments

Marc - Thanks....now as far as shows....MCon is a question I will be leaving for AMPS Internation the Tues the following week!!!! Sorry

Rounds Complete!! 

Well…it has been a few weeks. Work is killing my bench time and finally the big bird day came. After all the festivities, I was finally able to get some time in the studio.

With the frame painted and the wheels and tracks painted, it was time to finish up the drive train. The bogie mount was assembled and mounted, minus the bogies. The idler was glued on. The track halves were assembled. Then the drive wheel was glued into position within the tracks. Now the tracks are worked into place over the idler and carefully pulled until the drive wheel is in position and can be pushed onto the axel. Repeat for the other side and then mount the front tires

Hummm….daughter use camera……changed white balance…..excuse the color!!

Afterward the bogie sets were mounted. Fixed up the bogies on the inside by using Dark Sienna oil, dry brushed for that rusty rim look. The metal center teeth of the track were painted with Alclad Burnt Metal. After drying, then dry brushed with some Dark Sienna. As some pre-weathering to get at some of the hard to get areas, I used MIG Grey for Green wash to give that some what sandy look. It is visible on the tracks

Moving on the cargo section was primed and painted with OD. I will have the model in position with the rear door open. Here is the cargo section mounted to the frame.

Also primed and painted the cab section

Most of the remaining assembly is around the howitzer and details. I worked on the cab dashboard. There are no decals for the dash and the PE set was…..IMO….a waste of time so after base coating with OD, I hand painted the white gauges with black or red insides. The placards are Archer transfers. The shifter knobs and horn on the steering wheel is black marker. The fire extinguisher is Tamiya Flat Red and Alclad Brushed Aluminum for the handle.  Seats still have to be mounted.

Besides what is shown, I accomplished painting many of the howitzer assemblies which will be used later. Also began work on some of the other details like the Gerry cans, tools, etc.

Next up will be to finish the seats and get the cab mounted….then work the details until it is time for the howitzer.

As always thanks for stopping by. Your comments good or bad are always appreciated.

Rounds Complete!!

Its good to see some progress on this one. I like the pre-weathering in the tracks.

I'm actually hoping to get this kit for x-mas.

Looking good so far Mike. I'm really waiting on seeing that weapon all done up and pictures posted. I use Archers dash transfer set for the gauges as I can't paint stuff that small, especially with all of those shifters and the steering wheel in the way.

RE: the rusting on the track surface though, the only exposed steel on the tracks was on the inside where it met with the sprocket teeth and inner surface of the road wheel, the rest of the tracks were completely covered in vulcanized rubber. You might want to paint over that?

Good to see some progress but don't take too long to post that boom stick.

Jetmodeler - Thanks, you will enjoy the kit!! Thanks for stopping in

Ken - You are keeping me honest on these half tracks. I had see some tracks where you could see some rust/metal in the mid section......but it could be bad karma.....

The good thing is it is an easy fix!!

Now.....as for the gun.....as soon as I can finish and finalize the basic half track assembly, next up is the 105....soon...very soon

Thanks for all your help with this one. The video on mounting the tracks is great. Using that method allows the finishing as seperate assemblies and make painting soooooo much eaiser for the track/road wheels

Rounds Complete!!

Stay Frosty Mike maybe he'll get a short in his bionic eye.

Tony Lee

redleg12

Ken - You are keeping me honest on these half tracks. I had see some tracks where you could see some rust/metal in the mid section......but it could be bad karma.....

Mom always said honesty was the best policy.

Besides, I'm quite certain you'd offer the same guidance on an artillery piece wouldn't you? Oh wait, you already have in response to some email questions a few times.

As for seeing the metal in the center section, it's fairly common on 60+ year old museum pieces, or junks sitting around and such to see the rubber breaking down and chipping off but during the vehicles relatively short lifespan it would be pretty odd to see and fairly troublesome in the eyes of the crew I would think.

Moving along nicely after the Turkey Day interruptions Mike, looking good!

Looking real good Mike!  I have been following you with interest because I have similar DML kit in the stash... thanks for doing this!

Tony - Now, I feel honored to have Ken give his tips.......as I try to give mine when in the back of the breech block!! Always a pleasure to have you stop in!!

Ken - Ahhhh.....thats what I remember.....nice and ugly.....even the metal on the inside of the bogie's was clean on your original photo. I am contemplating a fix.......maybe some rubber/some metal as the sand in the desert would wear the rubber . Thanks for all the help

Bill - Yep....looking forward to knocking the Stuffing out of this one soon!!

Andy - Thanks. I am glad this will be of help to you....especially some of the tips from Ken.

Rounds Complete!!

Mike, Kenny has been my bosom buddy since the first day of my modeling career. He helps to keep me pumped up and in return I keep his feet on the ground when he ain't working on a roof.

He ain't heavy he's my brother

Tony Lee

Looks great Mike. I've always liked this combo but can't figure out if it's because of the vehicle or because of the weapon itself. Both are classics. Watching your progress on this for sure!

Mike, I agree about those great tips from Ken.  I hope he will be around to help me when I build mine!   Looking forward to your next update...

 Mike it's been a little while for me but I had to stop in and see whats up around here. Apparently a lot! Lots of new names and tons of stuff to get caught up on. Of course I had to make this my first stop though 

  This ones taking shape nicely. The feed back from Ken is really helping our do this one justice.

  One thing about pe sets I've learned you never use all of it. I'm lucky if I use 2/3rds of one and I've never used a whole set. Also some times the molded detail looks better than the pe part.

  Now I think I'll wander around and catch up on things

I see you and I are on a similar pace these days.  Hard to be believe I did 21 or 22 models a few years ago.

But progress is progress and yours is good.

Hey Mike, looking good so far, but you know that i have to tell you to put some weathering in that cab there--some burnished steel on the shift levers where they'd wear and some wear and chipping on the cab floor followed by a layer of dirt or old mud. These guys didn't exactly clean their boots when hopping in and out!

Make the cab look "loved in" Mike!

EDIT--OOPS! I mean "LIVED" in--ha ha hahaha! What the hell was I thinking?!  ........