stikpusher

Well ya can always hide the dinged grill with mud weathering...

Haha, that's true.

Tanker - Builder

Hi ;
 I don't remember the year model now . But , that was the year model I based ALL my short Bed Wreckers with Century Wheel Lift gear on . Darned good trucks . I like Fords , but for what we did , for some reason we'ed keep breaking the frames . Broken frame , The truck doesn't earn money . Bye , Bye .
     The last one in the fleet retired four years ago after being rebuilt from parts of five different trucks after the Tornado of 1982 . Went through Alexander , Ar . Can you say town totaled ?   T.B.

Interesting story, T. B.

Tanker - Builder

Dad Gum It !
 Young Man , That looks downright nice . Very Good T.B.

Thank you for the compliment.

Dad Gum It !

 Young Man , That looks downright nice . Very Good T.B.

Hi ;

 I don't remember the year model now . But , that was the year model I based ALL my short Bed Wreckers with Century Wheel Lift gear on . Darned good trucks . I like Fords , but for what we did , for some reason we'ed keep breaking the frames . Broken frame , The truck doesn't earn money . Bye , Bye .

     The last one in the fleet retired four years ago after being rebuilt from parts of five different trucks after the Tornado of 1982 . Went through Alexander , Ar . Can you say town totaled ?   T.B.

Well ya can always hide the dinged grill with mud weathering...

<---- Total resin kit amateur!

.

This is what happens on my first all resin kit.

The grille part is one piece with pour block out back. This didn't fit into the front of the cab grille opening so I thought I'd sand down the pour block part of it so it would fit. Bad idea because the front detail and frame garnish is so fragile it aint even funny.

The frame garnish broke off in the lower left corner but luckily I found it. In hind sight, the best thing to do is to remove material from the cab part to open the cavity to accept the grille part. 

^Do not sand down this part. Too fragile.

^ Remove material from the cavity instead.

^ Dry fit

^ I broke off this little corner part during sanding of the grille part

^ I found it on the bench luckily

Thanks Fellas, I think I can finally move on from the cab interior now.

Really nice work there, she's getting better and better!

Great job.  It looks even better now.

Masked and painted brown. Looks much better now, I think. Also added that silver garnish with a silver drawing pencil.

Link saved, Thanks.

SprueOne

ah, replacement dash pad was black. Good info, Thanks!

 

Speaking of which. Here's yet another technical resource that you may be able to use for the finer details if you don't already have it. This site has about every Army technical manual that existed on there for viewing/ download.

http://www.motormayhem.net/cucv-info/

ah, replacement dash pad was black. Good info, Thanks!

If I remember correctly, the original color dashes had a reddish / brown appearance similiar to what you've got and the replacment dash pads were black in color.

You're pretty much steering in the right direction with the interior. In this small scale you can get by with what you've got for decals. Lookin' good so far.

Pawel

Hello!

Nice move with those decals! The interior is lookin' good - thanks for sharing, good luck with your build and have a nice day

Paweł

Hi Pawel, Thanks for the compliments.

HeavyArty

The interior is looking really good.  The guage faces came out really nice.  One issue I see though.  The top areas you have black on the dash was more commonly brown. Those surfaces are covered with a padded dash cap and it was usually the same color brown as the seats and door panels.  A few were black, but the brown was more common.

Wow, nice clear ref photos of the M1009 interior. It's not too late to change it and brown will probably look better because it will break up the different parts of the dash board anyway. Thanks for the advice. 

The interior is looking really good.  The guage faces came out really nice.  One issue I see though.  The top areas you have black on the dash was more commonly brown. Those surfaces are covered with a padded dash cap and it was usually the same color brown as the seats and door panels.  A few were black, but the brown was more common.

Hello!

Nice move with those decals! The interior is lookin' good - thanks for sharing, good luck with your build and have a nice day

Paweł

The cab interior parts are done and painted. This is the way this model has to be built. Sub assemblies will be built and painted before the whole model is assembled.

^ The kit does not contain decals for the dash board instrument cluster so I had to search through my own stash.

.

^ Micro Kristal Klear is curing over the gauge decals for lenses.
.

^ Paint complete on the interior parts.
.

^Clear orange acrylic was carfully brushed onto the gauge dial pointers before the Kristal Klear treatment.

.

Thanks for looking ...

LOL, yeah and I bet that burning rubber was stinky!

I was just searching for ref vids on the CUCV and found this one and a couple other good ones driving through mud and ponds.

Lol, he's generating quite a smoke screen there!

And I'm at the point of pretty much always just making stuff like shifters since I always break or lose the kit part.

While the paint is drying on the interior details of the cab and other parts, this YooToob video is short and entertaining...

During all of the material removal and dry fitting over and over... that little floor shifter broke. I fabbed a new one from wire and a putty handle.

Right: I'm going with M.M. FS34102 Medium Green, enamel because I can just spray it right out of the can.

Far left: M.M. FS34127 Forest Green, enamel bottle. (looks pretty close to aerosol FS34102).

Middle: Pactra FS34102 Medium Green, acrylic enamel bottle.

Hey Stik, Thanks for your help. I think the Forest Green is what I'm looking for. It is "brighter" than the dark olive greens.

HeavyArty

Forest Green (FS34127) is the color that was used at the time periord these vehicles were in service.

 

I'd say NATO green or green 34079. I've seen them in both. 34127 is too light.

Thanks for the rapid reply. FS34127, is a Tamiya color code?

Forest Green (FS34127) is the color that was used at the time periord these vehicles were in service.

Starting to paint the interior cab. Some of the green that is outside is also inside. What is your suggestion for the color to use?

Type of green I want to use as on this M1009:
http://data.primeportal.net/transports/don_pics/m1009/Dsc07395.jpg

mustang1989

Man you're throwin' alot at this puppy Bob! I'm digging the progress and outcome so far buddy.

Thanks again for checking it out. I'm having fun with this one.

Gamera

Wow, that's a lot of work but she's gonna look awesome finished! 

I hope so, Thanks for checking in. I think my pictures make it look like a lot of work but it's just basic cut and fitting. I've already realized a few short cuts that I'll illustrate near the end of the build.

Wow, that's a lot of work but she's gonna look awesome finished! 

Man you're throwin' alot at this puppy Bob! I'm digging the progress and outcome so far buddy.