SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Rommels Rod

4694 views
32 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2015
  • From: the redlands Fl
Rommels Rod
Posted by crown r n7 on Thursday, February 14, 2019 2:08 PM

I first built this kit in 1969 for what it is a hot rod 1/2 track. This time Im removing most of the chrome from the engine steering wheel and grill. Im getting back in to the swing of things with an easy kit more painting and weathering, its more of a twight zone build we will see how it goes.

 

 

 Nick.

  • Member since
    September 2012
Posted by GMorrison on Thursday, February 14, 2019 2:17 PM

Look forward to this one! I built it a couple of years back and swapped a Tamiya 251 rear end in.

 Modeling is an excuse to buy books.

 

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Friday, February 15, 2019 3:05 PM

Thank you GM I started the preshadeing w/ tamiya red brown and black for the rear compartment. the sprayed drk yellow for the body and chassis, drk gray for rear compartment.

 

 

 Nick.

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Sunday, February 17, 2019 11:56 AM

Looking good! Going to have to move it up in line in the stash. Hope I haven't picked anything out of it along the way.

Jim  Captain

 

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Sunday, February 17, 2019 12:13 PM

Looking real good! 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Sunday, February 17, 2019 4:51 PM

Thank you Fox and Stik . I’m going to remove the chrome from this kit. Almost done with base coat need to match the grill to the hood .

 

 

 Nick.

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Monday, February 18, 2019 1:31 PM

Started the weathering on the diesel sprayed Tamiya gloss clear gave an oil wash of raw umber then a light dusting of SnJ powder

 

 

 Nick.

  • Member since
    April 2015
Posted by Mopar Madness on Monday, February 18, 2019 8:31 PM

Oh man, that’s looking real nice!

Chad

God, Family, Models...

At the plate: 1/48 Airfix Bf109 & 1/35 Tamiya Famo

On deck: Who knows!

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Tuesday, February 19, 2019 11:04 AM

Thank you Chad so far so good . started weathering the wheels and tracks and the body is ready for gloss clear.

 

 

 Nick.

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Wednesday, February 20, 2019 3:33 PM

I sprayed Tamiya gloss clear and gave a oil wash of bernt umber and black applied decals and sprayed with tamiya clear flat. Test fit the major parts and some other stuff

 

 

 Nick.

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Wednesday, February 20, 2019 3:35 PM

Thats turning out really nice!  Can't wait to see Rommels and drivers skeleteons in there.

Thanks,

John

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Friday, February 22, 2019 8:24 AM

Thank you Keavdog started on figures last night gave base coat to heads and body waiting for clear coat and oil washes, the drivers eye socket needs some ivory  if not may be too dark.

 

 

 Nick.

  • Member since
    June 2018
  • From: Ohio (USA)
Posted by DRUMS01 on Friday, February 22, 2019 10:00 AM

Not sure what happened to my post, but...

I built this kit around 45 years ago, when I was a kid. I liked it then and I love what your doing to it now. Classic model, and you have pulled off a GREAT BUILD.

Ben 

"Everyones the normal until you get to know them" (Unknown)

LAST COMPLETED:

1/35 Churchill Mk IV AVRE with bridge - DONE

NEXT PROJECT:

1/35 CH-54A Tarhe Helicopter

 

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Friday, February 22, 2019 6:37 PM

I dont know what happened either. I gave an oil wash to the heads .

 

 

 Nick.

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Sunday, February 24, 2019 7:18 AM

finished up with bones and some clear flat.

 

 

 Nick.

  • Member since
    March 2003
  • From: Towson MD
Posted by gregbale on Sunday, February 24, 2019 7:47 AM

YesYesYes

Greg

George Lewis:

"Every time you correct me on my grammar I love you a little fewer."
 
  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Sunday, February 24, 2019 9:12 AM

Oh man, that is cool! Nice work on all of it. Love the skeletons!

 

 

  • Member since
    July 2008
Posted by Est.1961 on Sunday, February 24, 2019 9:15 AM

Have been seeing this kit for years never seen one built wasn't sure what it would look like, but you have done a lovely job on it to show that it will turn into an eyecatcher on any shelf. 

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Sunday, February 24, 2019 12:16 PM

Bakster thank you lots of fun with these little guy's

EST61 many thanks its a fun kit goes together easy.

removed the chrome from hood ornament' but its still in brake fluid need to clean up .

 

 

 Nick.

  • Member since
    February 2003
  • From: East Bethel, MN
Posted by midnightprowler on Sunday, February 24, 2019 12:31 PM

Well done so far.

Hi, I am Lee, I am a plastiholic.

Co. A, 682 Engineers, Ltchfield, MN, 1980-1986

1 Thessalonians 4:13-18 1 Corinthians 15:51-54

Ask me about Speedway Decals

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Sunday, February 24, 2019 9:12 PM

Great job so far!  It's a good kit, deserving of the attention you're giving it.

I removed the chrome from the Red Baron hot rod, too.  I wanted to be able to clean up the seams and sprue gates, and it was just easier to do it that way.

If I could offer a suggestion, I would add a drop of clear gloss on Rommel's goggles-Future, for example, or your clear gloss of choice.

Best regards,

Brad

The bigger the government, the smaller the citizen.

 

 

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Monday, February 25, 2019 6:16 PM

Thanks Brad I did add a drop of future to the generals goggels and the driver and general are in place with some small stuff.

Thank you midnightprowler its a fun kit.

 

 

 Nick.

  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Monday, February 25, 2019 6:24 PM

Lol. That is awesome! Man, you did nice work. I love the weathering that you did. And what a fun project. Thanks for sharing!

  • Member since
    January 2015
Posted by PFJN on Monday, February 25, 2019 8:42 PM

crown r n7

...

 

Good thing they still have their hats and boots.  Otherwise this build might violate the boards "no nudity" policy (though in a very extreme way Surprise)

Stick out tongue

1st Group BuildSP

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Monday, February 25, 2019 9:37 PM

W - O - W!!!!! Looks great. Toast Toast Toast

Jim  Captain

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Monday, February 25, 2019 9:41 PM

Awesome job

Thanks,

John

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Tuesday, February 26, 2019 9:56 AM

Bakster Thank you I appreciate for comments.

Greg YesYes

PFJN I havent looked at it that way but its the ultimate tanning machine LOL !!!!

Fox Thank you my friend.

John Im glad you like the build.

The Rommels Rod is finished again thank you all for watchin and your comments.

 

 

 Nick.

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Tuesday, February 26, 2019 4:22 PM

So...darned...COOL!!!!!!

The bigger the government, the smaller the citizen.

 

 

  • Member since
    December 2018
Posted by Ted4321 on Tuesday, February 26, 2019 6:03 PM

I thought I already commented but it appears my comments were only in my head. 

Nice job, man.  Very cool. 

T e d

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Thursday, February 28, 2019 6:56 AM

The Baron. thank you for some reason the chrome was harder to remove on this kit,but it was has fun as I remembered it.

Ted. I appreciate your comments and thanks for watching 

 

 

 Nick.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.