SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

PL Refit, Advice needed *UPDATE*

2671 views
32 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2003
  • From: maine
Posted by ilikespagetti on Tuesday, January 2, 2007 5:40 PM
Another thing that I have seen done is using a leather hole punching tool to make little circles of masking tape. maybe tedious but it works.
I am a man, But I can change. If I have to....I guess...
  • Member since
    June 2004
  • From: The House of Blues Clues
Posted by Griffworks on Wednesday, December 20, 2006 10:42 AM
 Lanarian wrote:

Hi again all,

   I'm finished with the subassemblies on my 1701-A, and am (almost) ready to start painting.

   Have a couple of questions first tho:

    1. What's the best way to mask all the little windows and glassy-bits

I've used Tamiya Liquid Mask on some of my models in the past, but have found it to be a bit hard to clean out of cracks/crevices.  Another alternative that I've seen folks use is Elmers Wood Glue. 

    2. Do I leave whatever masking I use on from Primer to finish coat, or does it need to be removed and reapplied at each stage? I'm concerned about removal once the paint has dried.

     And of course, any other tips/suggestions are greatly appreciated!!

                                 Thanks!!

Yes, leave it on thru every stage prior to the final clear (Dull?) coat until the paint has fully cured.  I recommend taking it off prior to your clear/dull coat.  I've not yet built a 1/350 PL Refit, but have never had problems with the above method on other kits I've built  in the past. 

 

The greatest measure of a man is his children and what kind of people they are.

 

  • Member since
    November 2005
Posted by Anonymous on Wednesday, December 20, 2006 7:20 AM

Hi again,

   After using the search function, I'm going to try using Testors clear parts cement as a masking agent. I'll check back in and let ya know how it works out.

                                      Thanks!

 

  • Member since
    November 2005
PL Refit, Advice needed *UPDATE*
Posted by Anonymous on Tuesday, December 19, 2006 5:31 PM

Hi again all,

   I'm finished with the subassemblies on my 1701-A, and am (almost) ready to start painting.

   Have a couple of questions first tho:

    1. What's the best way to mask all the little windows and glassy-bits

    2. Do I leave whatever masking I use on from Primer to finish coat, or does it need to be removed and reapplied at each stage? I'm concerned about removal once the paint has dried.

     And of course, any other tips/suggestions are greatly appreciated!!

                                 Thanks!!

*UPDATE* Disaster!!! As stated below, I used Testors Clear parts cement to mask the glassy-bits. Now I can't seem to get it off. I've tried peeling it off but it just wants to crack and chip. I do not recommend this technique.

   I'm headed over to the painting section and see if anybody has any tips for getting my windows and such cleaned off.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.