What do you do for a living?

Yes sir, Evendale

ridleusmc

I get to build jet engines. 

 

 

Do you in Evendale, or do you work out of CP or NP? 

ridleusmc

I get to build jet engines. 

 

 

Oh...you're with that "other" jet engine maker 

I get to build jet engines. 

I think I replied to this thread the first time around, now I just bellyache to my wife about my commute to work where I really make ALOT of people mad by kicking back aircraft parts that look like they were "repaired" by a hamfisted gorilla. I now work as a QA inspector for an FAA part 145 repair station. FYI not real sure how I got here LOL.

DDonSS3

Did 20 years in the USN as a P-3 Aircrewman doing Non-Acoustic and Acoustic Sensor Operation. Worked at a electronics plant as a Rent-a-Cop. Seven years for the USPS in a big distribution center outside of Philadelphia. I just couldn't take working there anymore. ATTEMPTED to sell cars for about 1-1/2 years. Been a loss- prevention camera operator since 2014.

 

Thank you for your service!

And to everyone who has served...thank you.

PFJN

 

 

PontiacRich

Let's see:

17 years as an Aeronautical Engineer

2 years as an IT Specialist

7 years in wooden boat building and repair

1.5 years as a Project Engineer in the shipbuilding industry and still going...

 

 

 

 

Hi,

That's an interesting career path.

Pat

 

Thanks Pat.  Yes, it's been a long strange trip.  Chronologically, it went like this:

4.5 years at a jet engine manufacturer

10.5 years at an airplane manufacturer

7 years in wooden boat building 

2 years being laid off - getting IT certifications & Project Management training

2 years in a start up General Aviation company doing IT and Engineering

1 year unemployed

1.5 years doing IT contracting

and currently almost 1.5 years in Project Engineering in the steel shipbuilding industry

The names and dates may have been changed to protect thefoggy memories of me. 

Early 70s: landscaping assistent for multiple Gull gas stations.  Paperboy for the Seattle times.

78 thru 84:Goofing off and odd jobs including cleaning up the memorial colliseum in Portland OR. after rock concerts.( I met a lot of "interesting " people backstage and broke a few laws but its ok......I dont remember half of it.)

84 thru 86 :worked at American steel as a slag boy( scraping slag off hot metal parts) then got promoted to crane operator.   Its funny how everyone gets out of your way when your moving a 40 ton slab of steel from one end of the plant to the other.

87: Hitchhicked around the U.S. with the Grateful dead......the best vacation I never rememberd. What I do remember cannot be repeted here.  Sorry.

88 thru 92:Part time machinest. odd jobs in a variety of metal shops. Janitor at Portland city hall.

93 thru 96: Started as the janitor for a chain of movie theaters and worked my way up to general manager (this just means when sombody didnt show up I had to )

97:Worked in a foundry turning scrap aluminum into1700 lbs ingots   HOT!!!

98 thru2002: decided to get married (BAD IDEA!!! ) had a baby girl so I got serious and started driving passenger busses for the airport

2002 thru2010:Cross contry truck driver.

2007:Got remarried. (Definetly a GOOD idea!!)

2010 thru2013: short time in a trailer manufacturing plant. short time driving school bus ( kids suck when their confined in a 50 foot tin can! ) and driving a water tanker for the forest service

2013 thru 2016 : Driving a cement truck.

September 2016 to now ; Moved to southern Arizona and am now working as a dump truck/cement truck driver.

Their were all manner of odd jobs thru the years ... most in some sort of steel mill or janitorial but I cant remember them all.

PontiacRich

Let's see:

17 years as an Aeronautical Engineer

2 years as an IT Specialist

7 years in wooden boat building and repair

1.5 years as a Project Engineer in the shipbuilding industry and still going...

 

Hi,

That's an interesting career path.

Pat

13 1/2 AD USAF as an Avionics Guidance & Control System Specialist (KC-135A&R, B-52G, U-2). Thanks to Uncle Sam got to travel the world, and my PCS locations were England, New Hampshire, Texas, California, Korea, & California, with TDYs  all over the world. Somehow that lead to Network Engineer, and then to Cisco VoIP Consultant. 

Let's see:

17 years as an Aeronautical Engineer

2 years as an IT Specialist

7 years in wooden boat building and repair

1.5 years as a Project Engineer in the shipbuilding industry and still going...

Wilbur Wright

My brother and I invented the aerospace industry

 

arent you retired yet?

My brother and I invented the aerospace industry

ExtremeTeam

Graduated from community college in 1988 with a degree in architectural drafting.  After graduation I was hired in the land surveying field in the spring of 1989.  Since then I have gained my professional license in land surveying in the states of Washington and Idaho as well as being certified as a federal land surveyor with the Bureau of Land Mangement.  Still with the same company I started with in Northeast Washingtson State - its been a great place to spend the last 28 years at.

 

modelcrazy

 

mustang1989

Wow!! It's been a long while since this thread was active.

 

 

Never gets old. People love telling their stories. 

 

PFJN

Hi,

I hadn't seen this thread before, but since its recently been reserrected, I'm a Naval Architect.  Mostly since I  graduated in 1988 I've been working for various design firms in and around Washington DC (with a very brief stint at Military Sealift Command).  The job has given my a chance to work on some interesting projects, including the LCS1 class, some NOAA research ships, some stuff in support of a Maritime Museum out in San Francisco, the LCAC/SSC program, some stuff in support of the AAAV/EFV tracked vehicle program, some Coast Guard Deepwater Program stuff, and some Military Sealift Command/Auxiliary ship stuff.

In addition the job has given me the opportunity to travel to some interesting places like Japan, Korea, Norway, and the UK.

Pat

 

 

Graduated from community college in 1988 with a degree in architectural drafting.  After graduation I was hired in the land surveying field in the spring of 1989.  Since then I have gained my professional license in land surveying in the states of Washington and Idaho as well as being certified as a federal land surveyor with the Bureau of Land Mangement.  Still with the same company I started with in Northeast Washingtson State - its been a great place to spend the last 28 years at.

Hi,

I hadn't seen this thread before, but since its recently been reserrected, I'm a Naval Architect.  Mostly since I  graduated in 1988 I've been working for various design firms in and around Washington DC (with a very brief stint at Military Sealift Command).  The job has given my a chance to work on some interesting projects, including the LCS1 class, some NOAA research ships, some stuff in support of a Maritime Museum out in San Francisco, the LCAC/SSC program, some stuff in support of the AAAV/EFV tracked vehicle program, some Coast Guard Deepwater Program stuff, and some Military Sealift Command/Auxiliary ship stuff.

In addition the job has given me the opportunity to travel to some interesting places like Japan, Korea, Norway, and the UK.

Pat

mustang1989

Wow!! It's been a long while since this thread was active.

Never gets old. People love telling their stories. 

That's quite a spread of jobs there Mark.

Wow!! It's been a long while since this thread was active.

Long and varied career. U. S. Navy - 22 years 6 month and 9 days of undetected crime. Volunteer Firefighter/EMT in Virginia Beach from 1982 - 1992 Over the Road truck driver for J. B. Hunt and Schneider National. Currently Orange County (Florida) Sheriff's Office as a civilian supervisor (fingerprint Unit)

This thread is getting a bit old, but what the hell.

I'm a machinist, basically a failed mechanical engineer. I never finished school (shame on me) but I did grab cerifactes for machining along the way. I now program and operate fanuc and mazak machinery. I have been doing this for close to 25 years and have just discoverd I truly hate it!

Well currently I'm a Aircraft Mechanical Parts Repairer, specifically gear boxes, and TMS specific I am one of barely a handful of wrench turners (4 left in the world) that repair and overhaul the Rolls Royce Pegasus engines accessory gear box.

I am proud to turn out a good to go box for my Corps...........

I graduated with a degreee in mechnaical engineering, worked the field for six years, went ten drawing plans for commercial kitchens and bars, then another eleven (so far) drawing up supermarkets.  The company I work for operates around 30 markets and over 100 retail shops, so I am kept quite busy.

Hello everyone,

I am a firefighter/paramedic, and my wife is a 3rd grade school teacher. We both love our careers and wouldn't have any other job. I am new to modelling so with my rotation schedule I'll have a lot of time to model. This is a great discussion.

Hunter

I'm a mason. Not the secret society, but a bricklayer. I live in central PA where in a month or two it'll be too cold to work reasonably, so more modeling time.