What’s on Your Bench Now?

The Golden Hind from Occre. See my built post

Joe

Andy's Hobby 1/16 Tiget

" target="">

KeithRob

My first attempt at winter whitewash and chipping. . .

 

Academy M981 FIST-V... a long slow project

The damaged A-10 cowl is somewhat clean as it's the outer cowl, the inner cowl is not so clean.

Eugene, are you sure it's high enough for everything to pass under it?

Stay safe.

Jim 

Scratch built covered bridge for my Lionel layout out of craft sticks. pichost

Well, had to put models aside for a few days.

       Eyes are sorted and I now have (No Pictures, sorry) The "Goethe" River Steamer, U.S.S. Pegasus Hydrofoil and the "Playstation" catamaran under construction. Of those listed the "Playstation " is the one giving me fits!

" target="">

KeithRob,

What are you using for whitewash?  I plan to do a Stuka in winter camo.

Gary

My first attempt at winter whitewash and chipping. . .

Andy's 1/16 Tiger

" target="">

" target="">

approaching the finish line... an Italeri Panther

Thanks muchly for the fast response! 

Looks like the ghost grey on the cone section and an off-white or sky grey on the straighter cylindrical part. Amazingly clean too, given how close the engines must be to the interior faces of the cowling. 

Nice!  I have that kit in the stash.  May depend on finish you choose but heres a good look for the ghost gray

Academy's new-ish 1/48 A-10C Warthog. An interesting build would be putting it mildly. The detail is beyond great for OOB - that slide-molded single-piece rear fuselage is pure genius, one of the best single model parts I've ever seen. But there isn't much room for error. It seems like even a single layer of paint on a gluing surface is enough to make the fit up of certain seams go all wacky. It's like they didn't factor this is or engineered it with the same sort of thinking as a armor build where you prime/paint the entire vehicle when the full build is done. The lack of connecting pin locations for the front segment of the fuselage adds a lot more difficulty to what in the instructions would appear to be a basic build. And the landing gear is just plain horrible. 

Oh, well, onwards & upwards. It'll turn out fine despite these annoyances. BTW, does anyone know what color the inside of the engine cowlings on an A-10C should be? Academy's paint instructions are adequate but they left out the cowling interiors, which stinks because the wrong color will be obvious & noticeable.

Eduard Russian P-39 2fer.

Pat, that reminds me of the old Rat Fink t-Shirts, with a bid blower, hurst shifter, and some kind of creature out the top of the roof. That definately looks like a gasser all the way. 

For Jarrod and I, this is what we are working on at the moment:

Model Master Del Aire/Tarpit Toon,

This is what I am currently working on.

Tamiya P-51B Mustang

Nice Marder Stik!

fox

Artesania Latina Bluenose II wooden sailing ship.

https://photos.app.goo.gl/8BpVMcPE7vZ2V2z36

Typical AL kit. Looks great. Good wood parts, laser cut and nice fittings. Couple of problems planking the deck and now have small problem continuing with adding the bulwarks and planking but nothing that can't be fixed. WIP in Ship section.

Stay safe.

Jim 

 

Jim, that is very cool! Please post some pics when complete!

I've got a few kits in various stages of construction (barely started to almost done) right now, but this is my current focus build. A shelf of doom kit started ages ago and sidelined repeatedly...

This is the old Testors Italeri Marder III H. It was at this point when I resumed construction this past summer...

I am actually working on 2 models at the same time right now.  I have never done this before.

I am working on a Chevy Astro van kit from Fujimi. I am doing a lot of scratch building to make a custom van.

To avoid burnout I take breaks from the scratch building to work on a curbside model. This vehicle is a 1974 Toyota Grande MKII.

1/48 Monogram T-6 Texan and a 1/48 Tamiya P-51B - hope to wrap these up before the end of the year.

Jusr cleaning off my bench.  A Tamiya Gloster Meteor Mk 1 is going on bench then.  Every year the Hope-it-don't-snow event has a special award- Best Early Jet, so am shooting for that.

Some old lady waiting for the bus. Okay, it's not my bench.

Artesania Latina Bluenose II wooden sailing ship.

https://photos.app.goo.gl/8BpVMcPE7vZ2V2z36

Typical AL kit. Looks great. Good wood parts, laser cut and nice fittings. Couple of problems planking the deck and now have small problem continuing with adding the bulwarks and planking but nothing that can't be fixed. WIP in Ship section.

Stay safe.

Jim 

I have a Meng Magach waiting for Blacken-it for the tracks, Tamiya Panzer IV/70 A waiting on me to build the tracks and an Academy SBD-1 waiting for clear coat and decals. I'm just looking for a little motivation to get me going.