SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

2014 BRAILLE SCALE (UPDATE)

43710 views
540 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Sunday, October 12, 2014 9:09 PM

Duke Maddog
That was after having ripped apart most of my assemblies and having to rebuild them to the proper assemblies. By this time, I was too fed up with this to go on, so I moved on.

yes and after you put the tires on no one will see any of it. looks like you are at the point of deciding launch or road mode. let me know i have a tip or two. and be careful with the front piece which is the back of the cab so you don't break it. i didn't break mine but the next time i won't put it on that early.

oh and i blame you, my friend matt, and REVELL for getting me into 1/72 so there.......

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    June 2003
  • From: Rowland Heights, California
Posted by Duke Maddog on Sunday, October 12, 2014 7:39 PM

Modelcrazy, that is one brilliant job on that little plane! Way to go! I'd say that your badge is well-earned.

68GT, looking good. That is an excellent smooth paint job!

  • Member since
    June 2003
  • From: Rowland Heights, California
Posted by Duke Maddog on Sunday, October 12, 2014 7:37 PM

Okay, I'm finally able to start up here, so this is the box top of the model I'm building for this. It is the Zvezda 1/72 scale Topol.

I can blame Wayne for this; his excellent work has motivated me to get this and start building it. Hey, imitation is the best form of flattery right? Anyway, I doubt mine will turn out half as good as his did.

Anyway, here is what I did for this...

I decided to ease into this by building the rocket casing first:



After that, I felt a bit more motivated to work on the chassis. It seemed a pretty easy; if tedious bit of work:



Then it came time to assemble all the axles. This is where I had loads of problems since so many of the pieces looked too similar; the numbered pieces that then instructions said were supposed to go together were the wrong combinations that didn't fit right, and the rest didn't seem to have enough pieces for the necessary number of assemblies! Eventually, I managed to get the proper axles assembled and installed in the places that the instruction sheet said they were supposed to go:



That was after having ripped apart most of my assemblies and having to rebuild them to the proper assemblies. By this time, I was too fed up with this to go on, so I moved on.

That's all I have for this so far. Stay tuned, I may have more done later this week. Meanwhile, thanks for looking in, comments are welcome.

  • Member since
    February 2010
  • From: New Jersey
Posted by 68GT on Sunday, October 12, 2014 6:25 PM

Very nice Fiat!

On Ed's bench, ???

  

  • Member since
    February 2010
  • From: New Jersey
Posted by 68GT on Sunday, October 12, 2014 6:24 PM
And a little more.

On Ed's bench, ???

  

  • Member since
    July 2014
Posted by modelcrazy on Sunday, October 12, 2014 4:56 PM

Ok guys, my little Fiat is finished, WooHoo!

I'm taking my badge, if you don't mind.

Steve

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    February 2010
  • From: New Jersey
Posted by 68GT on Sunday, October 12, 2014 1:17 PM

They are 4 Ju87 B/R  Stukas  all the same for the most part but in the first stages of painting.  Just decals and load outs are different.  It's kind of part of the reason this Hornet isn't done yet.

On Ed's bench, ???

  

  • Member since
    January 2014
  • From: Toronto
Posted by Rob S. on Saturday, October 11, 2014 10:52 PM

Hey 68GT..love the F-18...but, gotta admit, quite taken aback by how many projects you have on the bench behind it!!!

______________________________________________________________________________

 

On the Bench: Nothing on the go ATM

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Saturday, October 11, 2014 10:22 PM

hey duke

welcome. i obviously haven't done much with mine. i have a BM-21 (1/35 and 1/72) i have to have done by end of year but i may work on fixing my paint issue with my first one.

my MK-1 FEMALE took a 1st in 1/72 armor, big surprise.picked up a HORNISSE and a CHALLENGER 2 at auction and a JAGDTIGER and AAV-7 today at vendor sale. also took 2 more 1st and one 2nd.

i agree on the rigging. that has to be insane at this scale.

i have some detail painting to finish up the TYPE 61 and have started the base.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    February 2010
  • From: New Jersey
Posted by 68GT on Saturday, October 11, 2014 10:12 AM

I started this a while ago but have just gotten around to starting the decals.  I'm not sure when my last post was here let alone a post number.

On Ed's bench, ???

  

  • Member since
    June 2003
  • From: Rowland Heights, California
Posted by Duke Maddog on Saturday, October 11, 2014 10:07 AM

Wayne, that is looking fantastic! I also want to get all those other models you've mentioned. For now, I'd like to copy you and start my Topol for this Group Build. Is that good? Let me know.

Modelcrazy, nice work on that rigging, especially considering that it is in such small scale!

  • Member since
    July 2014
Posted by modelcrazy on Saturday, October 11, 2014 12:36 AM

Here is the rigging applied. Fortunately this is all the plane had, or at least all I can find.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Friday, October 10, 2014 10:19 AM

JGSDF TYPE 61 is done. HMG isn't mounted until i make a base. lessons learned: 1. brass rod axles for idlers and drive sprockets when using rubber band track, 2. leave the fiddly parts off until lower hull is painted, tracks are on and upper hull is attached. TAMIYA paints, black oil pin wash,  and REAL DEAL soft dirt the base may throw it into another category.

i am really getting into this scale which is scary given the 150 1/35 kits in the stash. i'll post better pics when the base is done. picked up 2 more, a CHALLENGER and a HORNISSE at club auction and i see AOSHIMA is doing a JGSDF PATRIOT, TANK TRANSPORTER WITH TYPE 74, and AMERICAN ATOMIC CANNON.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    June 2003
  • From: Rowland Heights, California
Posted by Duke Maddog on Friday, October 10, 2014 10:16 AM

That's looking sharp! Nice job!

  • Member since
    July 2014
Posted by modelcrazy on Friday, October 10, 2014 10:16 AM

Yea, me too.

I think the Fiat designs, both biplanes and monoplanes are just great looking planes.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    January 2014
  • From: Toronto
Posted by Rob S. on Friday, October 10, 2014 5:44 AM

Very unique looking plane, Steve. I like it. Looking forward to paint!!

______________________________________________________________________________

 

On the Bench: Nothing on the go ATM

  • Member since
    July 2014
Posted by modelcrazy on Thursday, October 9, 2014 11:45 PM

Here's tonights update,

Just need to add the rigging, paint, decals, weathering.

 

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    July 2014
Posted by modelcrazy on Thursday, October 9, 2014 7:42 PM

waynec,

here is the pic of the box for the front page.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    July 2014
Posted by modelcrazy on Thursday, October 9, 2014 1:26 PM

Duke,

Going to do sand yellow with green mottling, I can't remember which squadron it is.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    June 2003
  • From: Rowland Heights, California
Posted by Duke Maddog on Thursday, October 9, 2014 12:58 PM

Looking good Steve! Thanks for the memories too. I built this same kit about a decade or so ago. Supermodel does make some excellent kits; I think I've built all but two of their entire line.

How are you going to camouflage this?

  • Member since
    July 2014
Posted by modelcrazy on Thursday, October 9, 2014 9:28 AM

Rob,

It's not bad, the plastic is a little brittle. The detail is nice and they gave me options for 3 different versions, and four deferent markings.

All in all, I'd definitely build a Super Model again. I'm going to install the wings tonight, if they go on as nice as the landing gear I shouldn't have any problems.

 Waynec,

I forgot, you need a pic of the box for the front page don't' you? And here I went and deleted it from Photobucket. I'll get you a new one tonight.

Steve

 

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    January 2014
  • From: Toronto
Posted by Rob S. on Thursday, October 9, 2014 4:16 AM

Modelcrazy, how it this kit? I don't know Supermodel.

______________________________________________________________________________

 

On the Bench: Nothing on the go ATM

  • Member since
    July 2014
Posted by modelcrazy on Thursday, October 9, 2014 12:07 AM

Here is my updated pics.

Ready to install the wings.

It's a wee little thing.

 

By the way, I found the Ki 84 combo kit. Oh well, I'll build them for a different GB.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    January 2014
  • From: Toronto
Posted by Rob S. on Wednesday, October 1, 2014 4:59 AM

Ok, that one is cool too!!

______________________________________________________________________________

 

On the Bench: Nothing on the go ATM

  • Member since
    July 2014
Posted by modelcrazy on Tuesday, September 30, 2014 11:16 PM

Waynec,

Sorry, I couldn't find my Ki 84 Frank combo kit (I may have sold it), however I dug through my stash and came up with a little guy I've been wanting to build for a while and just never had the right reason. It's either this or one of five 1/72 Mitsubishi Zero's.

It's all in Italian, but I bet I can figure it out.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    January 2014
  • From: Toronto
Posted by Rob S. on Tuesday, September 30, 2014 6:48 PM

modelcrazy..just looked that one up..nice plane for sure..looking forward to seeing and hearing your reviews on that kit...

______________________________________________________________________________

 

On the Bench: Nothing on the go ATM

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Tuesday, September 30, 2014 4:12 PM

sure. will look for your pic.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    July 2014
Posted by modelcrazy on Tuesday, September 30, 2014 3:50 PM

waynec

Can I get in on this? I have a Hasegawa Ki 84 Frank combo and I would like to build one of them. If it's a go, I'll post a pic of the box and kit(s).

I can get this done standing on my head easy.

Steve

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    January 2014
  • From: Toronto
Posted by Rob S. on Sunday, September 28, 2014 10:40 AM

Theuns...you, Sir, are on fire!! That Lightning looks great, as expected!! I just started mine and have not yet decided which scheme to go with. I'm leaning towards the half and half OD green and NM. Not ready for Alcad yet.

______________________________________________________________________________

 

On the Bench: Nothing on the go ATM

  • Member since
    April 2010
Posted by Theuns on Sunday, September 28, 2014 9:19 AM

Lightning complete. I am not totally happy with the result, but you can't win them all LOL

Alclad bottom, top ate humbrol enamels wit Alclad semi sheen clearcoat. The decals went on very nicely.

As for the hurricane, I am close the the final sanding before primer phase.

Just to "recover" from the last few 1/72 scale builds I got a 1/32 Trumpeter MiG 19 LOL!

Theuns

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.