ARMOR - Sherman Family Group Build

Frosty, I have some interior shots and exterior shots of an M32 based on the M4A3E8, the 'turret' should be the same on both though, so I'll start scanning tomorrow... gotta dig 'em out tonight.

Ron

Frosty,

There were several different Sherman ARV's. The Americans and the British both had them. And they were different. I am assuming you want to do a American M32.

I don't know of any link info., but one of the Axis and Allies book covered the M32 in depth. Lots of good pictures there.

Also, there is the Hunnicutt. You actually may be able to check out a copy of the Hunnicutt at the local library (maybe). It's were I saw my first Hunnicutt on the Sherman.

Millitary Miniatures in Review also did a special on recovery vehicles and once again, the old reliable M32 was there too.


I hope this helps some.

thanx 4 posting the link, Ron & Robert !
Robert: the site looks great !
opened the box last nite, & could barely keep myself from getting
started... this is going 2 b a fun build w/ so many possibilities !
frosty

hey, everybody !

i've been thinking about what 2 do w/ my italeri cast hull m4...
can't decide between wading trunk pacific conversion
or ARV... but leaning towards ARV.
(anyone else doing that one ?)

i need some decent reference pix of the ARV (turret, the front a-frame
& the winch) so i'll know what i'm doing 4 sure...
if anybody has pix or a link, it would b a great help !

thanx in advance,
frosty

QUOTE: Originally posted by Erock68 QUOTE: You bet ... can hardly wait for the start ..... desk is cleaned off and ready to go. HA! I say! I want proof of a clean desk .....WITH PICTURES!

Don't ask me no questions, and I'll tell you no lies!

QUOTE: You bet ... can hardly wait for the start ..... desk is cleaned off and ready to go.

HA! I say!

I want proof of a clean desk .....WITH PICTURES!

QUOTE: Originally posted by andytank Ok guys question of the day. The return idlers on the Sherman tracks. What were they made of? Were they solid steel? Or were they hard rubber? Or steel with rubber coating? I want to know this so I know how to paint them, thanks

Steel. As were the return rollers on the V V SS. Where the end connectors rubbed on their edges they could get very shiny, burnished. On the HVSS they were rubber tired as were the return rollers.

Ron

Ok guys question of the day. The return idlers on the Sherman tracks. What were they made of? Were they solid steel? Or were they hard rubber? Or steel with rubber coating? I want to know this so I know how to paint them, thanks

You should be ashamed of yourself.

LOL.

Yeah, the blocks are huge and the pieces are wimpy !


Thats why I did them now. I figured if I broke too many I could order more.

Build.....

Denial....tsk, tsk, tsk,

Are we there yet?

Mike

Build22 - ROFLMAO ..... nice tale.
Quite the blocks on those TW suspensions aren't they !!

No, I really didn't.

Wanted to but I resisted !

I did cut some of the resin suspension from the casting ( i'm using tank workshop instead now ) and I did break a couple pieces and glued them together - but technically did not glue two different pieces together .............so I think I'm safe

What would be considered "starting early" ?


Well,
what happened was I took out all the pieces and lid them on the table, pushed them around a little ( someone else had mentioned this as a theraputic exercise to ease the craving to get rolling )

And well, I spilled some glue ....... I wasn't opening it to glue anything.....
you know........it just kind of spilled on the table...........
you know........then it got on some of the pieces .........
you know........then some of them happened to touch some of the others in precisely the way they would be put together......
you know......I turned around and it looked like the nose was all glued together ????

.......yeah that's it ......that's what happened

you know.........like I had almost meant to do it but didn't......really !
you know......stuff like that happens......



either that ..........or I think I may have been overcome with fumes from the glue.....
I think I started halucinating that it was actually Jan 15 ........

Yeah......maybe it was that too !


Well, can I be fined for that - can I be "booted" ? It was uncontrolable !! I did admit my weakness

Thanks for your input Robert.

I'll keep them.

The VVSS system which is supplied with the BARV is of the earlier "non-upswept" trailing arm type.

Latch . I also have a picture of an M4A1 with them on (at least that pops into my head right away).

I'd leave them, just for something a little different unless ...... the return roller mounts are upswept, then I'd change them.

Robert,

I would like your opinion.........

The Resicast BARV kit comes with the mid VVSS system with the 1/2 circle track guide plates instead of the more common shaped track guide plates.

I've seen a few pictures of vehicles with this track guide plate, but not many (an in-construction photo of a M4A4 in the Hunnicut and a WWII French M7 during Normandy). Most of the pictures I have you really can't tell which track guide the vehicle has.

Do you think keep them, or scratchbuild some of the more common track guides?

What's your opinion?

Thanks.

35? Wow. That's great. This should become another top rating thread in the days to come.

You bet ... can hardly wait for the start ..... desk is cleaned off and ready to go.
Heading to Calgary this weekend and pick up a few supplies (and a Shermie or two).

35 members signed up for this build .... great stuff !!!!

QUOTE: Originally posted by mark956 Sounds great Robert. T- 8 days and counting. mark956

The pressure's building up on me...

Sounds great Robert. T- 8 days and counting.
mark956

Hey Chris .... You will e-mail the finished pics to me and I will post them to the site.
As far as in progress pics go, standard hosting procedures will be in effect.

The e-mail address and the site address are both posted in my sigtag so they are easily accessible.

QUOTE: Originally posted by CTrill09 hey guys how are you, i was in the hobby store and a saw the Academy M10 Gun Motor Carriage on sale so i picked it up. I just ordered some fun aftermarket parts for it and i hope they come real soon. i was hopin that i could get in on this group build, it sounds like a really good idea.

Welcome aboard CTrill09.
mark956

since the build is just about a week away from beginning, i took a look at the website which is a really good idea, its going to be a lot of fun. I was wondering how everyones work is going to be pasted onto there. Im just curious.
- Chris

Ctrill09 - Welcome to the group build ..... I'll add you to the website. Good to have you on board with us.

Betty - all upgraded and you're active on the site

Ron - I'll upgrade Alex's name at the same time I add Ctrill to the site

Chris - yes ... that's the one.

Eric - Thank you ... I'm happy with the way it turned out

Frosty - the site addy and e-mail addy is always in my sigtag ... just find a post of mine and click on the picture and it will be much clearer.

Chris,

I'll look through my reference, but the few pictures that I know I have of the M10's of the 601st have very few if any markings on them.

I still wouldn't mind seeing those 2 pics of the 601st TD battalion. I have found 1 post-war picture in Austria and it didn't have anything but the star on the turret showing.

Is everybody set with photo references? Need anything? I'm sure somebody on this build could help out...

Ron.

QUOTE: Originally posted by shermanfreak OK gang .... the website is up and running. I'll have to change your page Trevor to the 76 version though. Anyway ... the address for the site is: http://members.shaw.ca/ShermanGroup/ Completed pictures can be e-mailed to me at : ShermanGroup@shaw.ca These addresses will be on my sigtag for the duration of the build. Just click on the picture for a clearer view.

Frosty, is this what you're looking for?

Ron

hi folks !
hope everybody's new year ( & build prep) is going just peachy !
a quick question:
can anyone post a link 2 the dedicated sherman group build site here ?
i think i missed the post w/ the address...
thanx in advance !
frosty