SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Official Natural Metal Finish Group Build II

266148 views
1792 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2007
  • From: NJ
Posted by JMart on Sunday, March 27, 2011 5:55 PM

what great work in here! I see Stangs, i see Stangs! 

Jeez, Julez, love that interior.. I am hiding mine now, not worthy of this GB lol

Finally back in the bench, working on the seat and pit and re-doing some stuff like the SB belts.

 

 

  • Member since
    July 2009
Posted by AlterEcho on Sunday, March 27, 2011 11:07 PM

Casper - Awesome Thunderjet. NMF looks great!

Kermit - Looks wonderful. If there is a boo-boo, I can't see it.

ColGray - You are zooming right along and it is looking good.

Julez - Smashing interior. You never fail to impress.

Vetteman - Thanks for the compliments. I owe everything to the guys here and my mags. Plus you guys set the bar pretty high  :)

  Alclad has been laid down. I am now working on all the fiddly bits. Not shown in the picture are the canopy and landing gear. I painted them with black enamel and have them drying under a lamp. I am hoping the black enamel will make the Alclad Chrome really shine. I have not even done this in practice...so I am hoping the results will be decent.

 

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Monday, March 28, 2011 1:49 AM

Hey Vetteman, is NMF III going to happen after this one wraps up? I was very naughty today and spend big $$ on the Trumpeter F.1/.3 1/32 English Electric Lightning. I had to have it, such a BIG kit. This bird is HUGE and is going to outsize the Starfighter! Also found some well priced AM but there is no way I am starting this kit till later in the year. This kit is #10, I am currently on #1. So hopefully a new NMF later this year will coincide just right.

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    March 2007
  • From: NJ
Posted by JMart on Monday, March 28, 2011 5:47 AM

AlterE - nice; just be careful with that lamp! I have seen plenty of "sad" (droppy melted) plastic bits in here due to over-lamping :)

NMF III - Yeah, Im in, anytime!   

 

 

  • Member since
    July 2008
  • From: USA California
Posted by vetteman42 on Monday, March 28, 2011 5:20 PM

AlterEcho ditto nice EatsWhistling

Ok guys with all the interest shown there WILL be a NMF III Yeah It seems there will be some rather large builds going on for the next round too. The rules will also remain the same.

Got some work done on the Streak Eagle today made the nose probe on my little lathe and am happy with the way it came out. Did a bit more filling and fitted the canopy. I hope to have some pictures in a day or two that are worth showing. My hope is to get a base coat of paint on it this week.

Randy So many to build.......So little time

  • Member since
    October 2010
  • From: Hobart, Australia
Posted by Casper the Chihuahua on Monday, March 28, 2011 5:33 PM

Dude, I can't wait for the next NMF!!! [drool.....]

I have ordered the Aires cockpit set (Resin and PE) and the Eduard exterior PE set for the Lightning. Also reckon ts going to use at least 2-3 bottles of Alclad lacquer! The surface area of this bird is huge.Not a lot of steps in the instructions but the sheer amount of plastic used in this kit is what made it so expensive.

Keep me posted...

Cheers

On the bench: A-4F 1/32 Hasegawa

Just deployed: F6F-5N Hellcat Nightfighter 1/48 Eduard

Up next: A6-E Intruder 1/48 Revell

  • Member since
    June 2009
  • From: Netherlands
Posted by kermit on Monday, March 28, 2011 8:42 PM

vetteman42

AlterEcho ditto nice EatsWhistling

Ok guys with all the interest shown there WILL be a NMF III Yeah It seems there will be some rather large builds going on for the next round too. The rules will also remain the same.

Got some work done on the Streak Eagle today made the nose probe on my little lathe and am happy with the way it came out. Did a bit more filling and fitted the canopy. I hope to have some pictures in a day or two that are worth showing. My hope is to get a base coat of paint on it this week.

Yayyyyyyyyyyy More shiny stuffBig Smile I am SO going to have fun!!

Richard

"Success is the ability to go from one failure to another with no loss of enthusiasm." - Sir Winston Churchill

  • Member since
    March 2010
  • From: Brisbane
Posted by Julez72 on Tuesday, March 29, 2011 8:44 PM

Thanks for the compliments guys, i'm glad you like the stang so farToast

Randy, yeah mate it's the Hasegawa 1/48 kit, it will carry the Eduard Zoom set, TD seat and wheels, Verlinden engine and gunbay set

and will be finished with allcad and Red Roo decals for 82SQD RAAF.....

Richard, go for it buddy, i recommend you get an Eduard Zoom set for you first crack at AM, there is not a whole heap to add

and the Zoom sets are quite cheap as well...Randy is right about resin, it does have an off putting smell to it when your cutting/sanding

but on the flipside the molded detail is awesome and it's fairly easy to work with...

Colgray, very nice work on your Stang, the NMF came out great, very coolToast

Echo, the jug is looking sweet, looks like your going to have a fine model for your collection...Love the pic showing the humble toothpic, the modelers essential tool...

Gamera, yeah your 29 looks very close to being finished, makes me jealous and want to pull mine out of it's box. Keep the pics coming..Yes

 

 

 

 

 

 

  • Member since
    January 2010
  • From: Nebraska, USA
Posted by CallSignOWL on Tuesday, March 29, 2011 10:50 PM

alright NMF III, Im in for that one. Stick out tongue But wait, its too shiny. I gotta grab my shades! Cool there, thats better!

 

------------------------

Now that I'm here, where am I??

  • Member since
    March 2010
  • From: Brisbane
Posted by Julez72 on Wednesday, March 30, 2011 12:20 AM

CallSignOWL

alright NMF III, Im in for that one. Stick out tongue But wait, its too shiny. I gotta grab my shades! Cool there, thats better!

 

Looks like all the usual suspects will be back for NMF III, how cool is thatCool

Randy you have created a monster...Devil

 

 

 

  • Member since
    February 2011
  • From: Launceston, Australia
Posted by the real red baron on Wednesday, March 30, 2011 1:54 AM

yay and a new guy

*some guy says to themselves* "ohh him again!!!"Stick out tongue

Cool

douglas SBD dauntless here i come

 

 

 

 

  • Member since
    March 2007
  • From: NJ
Posted by JMart on Wednesday, March 30, 2011 6:56 AM

Do we have a start date for NMF III yet? wait, I need to finish this one first Whistling

currently trying my hand at adding some SB wiring and details to the P-51s radios.

 

 

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Wednesday, March 30, 2011 10:15 AM

JMart

Do we have a start date for NMF III yet? wait, I need to finish this one first Whistling

currently trying my hand at adding some SB wiring and details to the P-51s radios.

Even though I'm in the position where I'm signed up for too many GBs, and kind of want to drop out of all of them and then sign up on an ad hoc basis as I complete each build...I too am curious to know when NMF3 kicks off.

Also...haven't been too active on here of late, but I just sprayed decanted Tamiya AS-12 Bare Metal Silver for the first time last night. The stuff looks great, dries fast, and holds extremely well. I honestly think it'd be great on its own, but it'd probably also make a great primer for other metalizers. It'd protect plastic from Alclad, and provide a nice undercoat for Model Master metalizers in case of lift.

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, March 30, 2011 11:32 AM

Thanks guys, the model is sealed and intend to start adding the wash to the panel lines tonight.

Doogs: Great stuff man. Really like how the Tamiya silver came out.

 

You know I was looking though my stash the other day and I believe that if I had any more Thunderbolts you'd have to call me Zeus. Still I made a New Year's Resolution that I would enter NO more GBs till I get some stuff cleared off the bench. So I won't commit at this time but might drop in with a P-47 sometime in the future.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Wednesday, March 30, 2011 11:39 AM

Gamera

You know I was looking though my stash the other day and I believe that if I had any more Thunderbolts you'd have to call me Zeus. Still I made a New Year's Resolution that I would enter NO more GBs till I get some stuff cleared off the bench. So I won't commit at this time but might drop in with a P-47 sometime in the future.

Heh - I was just joking over in Weathering that I've got a bad case of Jug Fever.

Somehow, since November, my stash has gone from one 1/48 Tamiya Razorback to...

2 x 1/48 Tamiya Razorbacks

1/48 Tamiya P-47M

1/48 Monogram Razorback

1/32 Hasegawa P-47D bubbletop

...and I've got a Trumpy 1/32 Razorback arriving today.

Had so much fun with Hairless Joe that I'm itching to build another 'bolt post haste! Even considering dropping out of/postponing a few other GBs to make it happen.

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    September 2009
  • From: Frisco, TX
Posted by B17Pilot on Wednesday, March 30, 2011 1:06 PM

NMFIII sign me up! i got a P-47 for it!

  

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, March 30, 2011 1:28 PM

Dang Doogs, you've as much claim to the title as I have. I think I have about five or so but I'm looking to pick up an Academy P-47N and trolling Ebay looking waiting for a good deal on the 1/32 Hasegawa bubbletop.

I've enough decals to do about thirty jugs though, seems P-47s ended up with some of the best nose-art and I can't stop buying cool new aftermarket sheets.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    July 2009
Posted by AlterEcho on Wednesday, March 30, 2011 4:48 PM

Does anyone know where I can get a 'bubble' canopy for my Tamiya 1/72? Or, does anyone want to vacuform me one?  Big Smile

  When I bought my kit, it was an open box. It looked O.K., but I have found what the issue was. The canopy had stress cracks. So, I sanded and sanded and finally got it to a point that it was presentable. Then I used 'bare metal' to mask the canopy and preceded to paint it. All went well and the only thing to do was clean the goo and dip in 'Future'. Then I made the ultimate rookie mistake... I cleaned the canopy with lacquer. To say I was horrified would be an understatement. When I went to the internet to search for a cause, is when I found out about lacquer and canopies.

  I found a canopy that might work at Squadron...but it is for a Hasegawa. So it might work, but who knows.

  Anyway, let me know if you come across something...

  • Member since
    March 2007
  • From: NJ
Posted by JMart on Wednesday, March 30, 2011 6:15 PM

Doogs – very nice and clean cover… I may have to try that some day.

Gamera – Check SprueBrothers and their Special Sales… usually have several large scale a/c on sale.

Maybe someone should start a Jug GB Whistling

A-Echo – Have you checked Squadron canopies? I am currently using their “Tamiya” 1:48 P-41D for my Revell birds… the canopies are easy to (VERY carefully) trim; will probably fit across manufacturers.

 

 

  • Member since
    July 2009
Posted by AlterEcho on Wednesday, March 30, 2011 6:28 PM

JMart
A-Echo – Have you checked Squadron canopies? I am currently using their “Tamiya” 1:48 P-41D for my Revell birds… the canopies are easy to (VERY carefully) trim; will probably fit across manufacturers.

  I saw one from Falcon, made for Squadron. It is for a Hasegawa, so I am not sure if it will work. If anyone knows that it will work with my Tamiya, please let me know.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Thursday, March 31, 2011 8:09 AM

JMart: Thanks! I'll give Sprue Brothers a look. I haven't been in any real rush to pick up the 1/32 since I've intended to get a few of the 1/48 kits done first for practice.

I like the idea of a Jug GB but would be afraid it might take away a pile of entries from the NM GB III though.

AlterEcho: It might not be a perfect fit but it shouldn't be too far off. Personally if I were you I think I'd give it a shot.  

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Thursday, March 31, 2011 9:42 AM

Gamera

I like the idea of a Jug GB but would be afraid it might take away a pile of entries from the NM GB III though.

This. Also from Weathering, 8th AAF, etc. 

My Trumpy Razorback arrived yesterday...I know it's the same size as the Hasegawa kit, but it just seems bigger. Also nice to see somebody mold the four-bladed props as single pieces. 

 

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    July 2008
  • From: USA California
Posted by vetteman42 on Thursday, March 31, 2011 5:28 PM

Gamera

I like the idea of a Jug GB but would be afraid it might take away a pile of entries from the NM GB III though.

Gamera crossovers are allowed here ya know Big Smile and if I recall correctly there were lotsa painted P-47's too. Sounds like a good idea to me go for it man !!!!!!!!!!

Wow I still cant get over all the interest in the group, you guys and gal ROCK in my book. So if you all think it would work this build group ends on May 1st and I was thinking the new one should start on May 2nd and go to May 1 2012. I will get the new page posted on the morning of May 2nd, and will be keeping the same rules. And as before if you are a week or so away from completing a build for round II I will keep it open for ya or you may carry over to round III, just let me know.

I will be building Revell's 1/48 B-29 Superfortress with foil, well I will be tryin to anyways Stick out tongue but wont start that till late summer as I have a Yak-7 to build then... Well this lil green feller sent me a 1/48 RoG Spitfire Mk IX  that I have been chompin at the bit to build, a really nice looking kit BTW.

Randy So many to build.......So little time

  • Member since
    July 2008
  • From: USA California
Posted by vetteman42 on Thursday, March 31, 2011 5:44 PM

AlterEcho

Does anyone know where I can get a 'bubble' canopy for my Tamiya 1/72? Or, does anyone want to vacuform me one?  Big Smile

  When I bought my kit, it was an open box. It looked O.K., but I have found what the issue was. The canopy had stress cracks. So, I sanded and sanded and finally got it to a point that it was presentable. Then I used 'bare metal' to mask the canopy and preceded to paint it. All went well and the only thing to do was clean the goo and dip in 'Future'. Then I made the ultimate rookie mistake... I cleaned the canopy with lacquer. To say I was horrified would be an understatement. When I went to the internet to search for a cause, is when I found out about lacquer and canopies.

  I found a canopy that might work at Squadron...but it is for a Hasegawa. So it might work, but who knows.

  Anyway, let me know if you come across something...

AlterEcho I make those kinda swaps all the time for my Revell kits. I just trim the canopies a bit long just incase, then fit them by sanding them. I do pack them with silly putty before sanding, makes life much easier. I did have the silly putty attack the plastic once, ( I dont think it was a Squadron canopy ) fogged it just a bit, dipped it in future and fixed it up.

Randy So many to build.......So little time

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Thursday, March 31, 2011 6:56 PM

vetteman42

 So if you all think it would work this build group ends on May 1st and I was thinking the new one should start on May 2nd and go to May 1 2012. I will get the new page posted on the morning of May 2nd, and will be keeping the same rules. And as before if you are a week or so away from completing a build for round II I will keep it open for ya or you may carry over to round III, just let me know.

Sweet! I'm down for...something!

Right now I'm leaning very heavily toward the 1/32 Hasegawa Jug my wife got me for Christmas. Considering doing "Slick Chick" of the 9th AAF/368th FG/395th FS. See the top two at left.

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    April 2010
  • From: Green Bay, WI
Posted by redraider56 on Thursday, March 31, 2011 7:41 PM

Vetteman:I'm probly gonna have to carry my Mustang over to round three.  Right now the only time I got time to work on it before May is the 4 days I got off for Easter but even then I'm not sure how much work I'll get done since I had a couple setbacks on it last time I was home, namely I for some reason left masking tape on the wings (from january....stupid me) and it pulled up bits of the silver I had on the wings and then also part of the aileron broke off with the tape too, so I doubt I will finish it in those 4 days.  I get out of school the 2nd week of May, and instead of dragging this GB on, I might as well go to the next one.

-Matt

On The Bench: 1/48 HK B-17G "Man-O-War II"

On Deck: 1/48 Tamiya P-38H, 1/48 Revell PV-1

 

 

 

  • Member since
    July 2009
Posted by AlterEcho on Thursday, March 31, 2011 8:23 PM

  Vetteman - Count me in for the next NMF GB. I will be doing either, or both, a Ki-61 and a C119 'Flying Boxcar'.

 

  I think I might have a fix. I found an open kit for $5.00. Some parts are missing, but the canopy is intact and so are the decals. So, I might go with the donor kit's decals. The fuselage was included, but already glued up. I examined the fuselage with the Tamiya. The donor kit's fuselage is horrible (donor kit is a Academy P-47D). The cowling is to fat and the canopy cannot be opened without hitting the aerial. On the underside, the turbocharger exhaust would have to be cut off and moved rearward. Even a newbie like me can see that this kit is horrible. Anyway, at least I have some stuff for my stash.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Friday, April 1, 2011 8:36 AM

V-Man: Thanks, never really thought about cross-overs. I like the idea of a P-47 GB if someone other than me wants to set one up. I'd consider tossing in a P-47 of some sort for it and/or NM GB III sometime this summer or autumn. I hate to commit to myself as I said I'd made a resolution not to start anything else till I finish some stuff off, I signed on for three GBs so far this year after I vowed I wouldn't do any!

I am looking forward to that foiled 1/48th B-29. Gee the 1/72nd scale kit is a friggin' handful, I can't imagine the 1/48th scale kit.

Doogs: Awesome! I've the same set of decals in 1/48th and intend sometime in the future to pick up the Academy 1/48th P-47N to build 'Too Big & Too Heavy'.

I started work on the fiddly bits on the B-29 last night. No idea the darn thing had so many little radio masts, pitot tubes, and little thingees mounted on it. I was hoping to be done this weekend but that ain't gonna happen... Embarrassed

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    July 2009
Posted by AlterEcho on Friday, April 1, 2011 12:06 PM

  I have been working with Model Master's Aluminum Metalizer. I am starting to prefer it over Alclad because I can use a brush to apply it. After it dries, I am having a hard time telling it from the Alclad. Very impressive product, so far.

  Also, I found a stress crack on the Academy canopy. I am going to use one of these canopies and order another one when I make a larger order. No need to pay shipping for one canopy, eh....

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Friday, April 1, 2011 12:13 PM

Gamera

Doogs: Awesome! I've the same set of decals in 1/48th and intend sometime in the future to pick up the Academy 1/48th P-47N to build 'Too Big & Too Heavy'.

Yeah, I picked this sheet up for "Raid Hot Mama", but like the Slick Chick markings for a bubblejug.

I've got one of the other Zotz sheets in 48th. Really looking forward to doing "Magic Carpet". Love the olive drab with NMF wings, cowl, and cowl flaps. Definitely one of the more distinctive Razorbacks I've seen.

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.