Kevin:

Great job! Very impressive getting that blue stripe just right.

Sorry guys, I've let things here kinda get sluggish. My Zero is coming along slowly and my camera is under repair so I can't post photos of what I have got done.

Cliff

Kevin its looking sharp!

Hello Everyone,

Long-time-no-see.  

I finally finished the Eduard 1/48 F6F-3 in the markings of Lt. Arthur Van Haren (9 kills).  I gave it to the family and it's on it's way to the Pima Air and Space Museum in Tucson AZ.  The model will be placed in the display cabinet with other memorabilia when Lt. Arthur Van Haren into the Hall of Fame.

So I'm back to work on the AZ Models 1/72 Ki-78 Ken.

Upper surfaces are IJA green.  Underside is IJA grey (I think it should be natural metal - according to the painting diagram).  I'm doing this one following the top color plan.

The tail is Tamiya red and I.D. stripes are Model Master deep yellow.  There were no decals for the blue fuselage stripe so it was masked and sprayed with MM Blue Angel Blue.  Taping that thin blue line over top of that large intake on the fuselage side was a lesson in patience!!  Still need to touch up some scratches.

I still have to fix the spinner and prop - something is off center.  Could be the prop, spinner, or mounting hole in fuselage.  I think I'll probably cut off the mounting peg on the prop and fill the hole in the fuselage and just glue everything on center.

Not too happy with the wheel wheels (brush painted), but I was too lazy to tape them off and spray the metallic blue (maybe next time).  I also had to add the retraction arms from copper wire since there were no parts in the kit other than the landing gear leg and wheels.

That's it for now.  Next up:  fix the prop/spinner (paint it red brown or 'propeller color'), attach gear doors, canopy, clear coat and then decals.

More soon

carsanab

its a floatie thingie!!! Gotta love it!!!...looking good

C

LOL

i'm about finishing two kits so i can get back to zero too

its a floatie thingie!!! Gotta love it!!!...looking good

C

NB: Some very nice work there so far. I know what you mean, it's either leave the top wing off to paint and try to make sure everything lines up or attach it and then try to paint and mask at with everything in the way

Good luck with the salt technique, I tried it a few times and never seemed to get the amount of salt just right. Either I got no masking or way too much. Please keep us posted here, I'd like to learn what works for you.

Went to spray the final flat coat on the Zero last night and spilled some on the model which promptly turned white. Sanded most of it off and working to fix the mess. Sorry guys I got so ticked off I put the thing back in the box and had to walk away. I'll see about cleaning the rest up tonight.

Needbeer...oooooh a floatie thing.

Sweet Pete so far Needbeer!yea I too thought 'Kingfisher' what? lol

NeedBeer

Hi Guys

I've been quite for a while on this GB. Did the first coat on the Pete a couple of months ago then got side tracked with various other unrelated projects like work, family, summer vacations, etc, not to mention clogging up the nozzle on my new airbrush which has taken over a month to resolve

Put a light coat of IJN Green over the metallic surface with salt (my first attempt at this method). Was hoping to do the second coat with the top wing attached but thats proving to be problematic. The struts on the wings are fine but then struts attaching to the fuselage are too short & there's not so much bend in the top wing so it looks like I'll have to trim & modify the wing struts, maybe scratch build new ones

Here are the pics so far ........

Len

great lloking pete not familiar with salt tecnicque but sems good

Hi Guys

I've been quite for a while on this GB. Did the first coat on the Pete a couple of months ago then got side tracked with various other unrelated projects like work, family, summer vacations, etc, not to mention clogging up the nozzle on my new airbrush which has taken over a month to resolve

Put a light coat of IJN Green over the metallic surface with salt (my first attempt at this method). Was hoping to do the second coat with the top wing attached but thats proving to be problematic. The struts on the wings are fine but then struts attaching to the fuselage are too short & there's not so much bend in the top wing so it looks like I'll have to trim & modify the wing struts, maybe scratch build new ones

Here are the pics so far ........

Gamera

Bsyamato: Looks great! When I try to get something curved like the seat in sheet plastic it always wants to pop apart.

Kevin: Hmmm, soda can aluminum - sounds like a good idea to me.

Thanx guys

Herc think the ip need some better trimming, at least will cut the decals to show the instruments propertly

used tamiya green cement to old the curved back surface, i totally forget to use the same piece to scratch the two sides and the back ...

Will try also with aluminium with the mary seats if they will not satisfy me. Pilot seat seems not so bad.

I forget about but i ruined the clear insert on the mary fuselage.... need to repair these pieces

Bsyamato, 

Looking good...like how you are trying to tackle that IP

Bsyamato: Looks great! When I try to get something curved like the seat in sheet plastic it always wants to pop apart.

Kevin: Hmmm, soda can aluminum - sounds like a good idea to me.

late Night update

seat on

i'm not happy with decals ip ..

then i drilled something

don't fit perfect but will fix it after

going to search the bed

Very nice looking seat. 

I have tried building them from scratch (with some sucess) from soda can aluminum, punching the holes with a Waldren Punch & Die set, and then folding them ala' photo etch (I actually use a photo etched seat as a pattern), but your seat looks better - I think I'll try using plasctic card next time.  Thanks for the example!!  Do you use .010 card stock??

Hmmm, I don't use much primer unless I'm doing NM. Normally just spray the underside paint over the entire plane to check for flaws.

Bsyamato: Very nice! The seat looks great! The whole cockpit is coming together nicely.

Big-Z: Roster updated!

few zero updates

Scratchbuild the seat for second time (yes i scratched one and lost!), also repaired the broken control rod, this time with metal parts

need more sanding to smooth the angles

Added this piece to the cockpit floor as main wellsl ceiling

that's was on the zero

They both look great Carlos,very cool colors on the Ohka ,I like it a lot! Nicely done Sir!!!

Tamiya primer is avaible but i use mainly humbrol 140 grey high thinned as primer (when i have it) or others good quality grey. Depending to the main color other ways i don't use primer. On the ki-27 not used primer for the too fine surface details.

Time to go on the cave and cut some sprue

the only thing they had was the rattle cans....my experience with Testors rattle cans has been horrible....they splatter and go on really thick.....except for their dull coat....that one works well..

carsanab

part of the problem I had with the Oscar was the lack of a good primer...I usually use Tamiya...but it wasnt available...I tried the Testors....what garbage...So I didnt use any....of course I got to the LHS couple of weeks ago and there it was ...cans of Tamiya primer...oh well....for the next one...BS...if you can get it in Italia...I would recommend it!!!!

Just curious...what Testors primer did you use? I use the good old gray enamel primer (bottle not rattlecan) frequently and with great results. 

part of the problem I had with the Oscar was the lack of a good primer...I usually use Tamiya...but it wasnt available...I tried the Testors....what garbage...So I didnt use any....of course I got to the LHS couple of weeks ago and there it was ...cans of Tamiya primer...oh well....for the next one...BS...if you can get it in Italia...I would recommend it!!!!

the famous white monster helps when the carpet monster fail!

I'm near to use a white layer to the under fuselage of a eb-66e, i'll try to use mr surfacer instead of some weak white color.

Big-Z:

Well, from the photos you posted they both look good to me. Will get the photos posted to the roster hopefully tomorrow night or sooner.

Thnaks....I'm not happy with the Oscar 'cause of all the problems I had with the white bands,...that and the fact that I melted away most of the detail on half of the bottom of the left wing...it was a struggle...

Big G...get the kit....Its got great detail and fits like a charm!!!! You will love it!!!

and you can post any of thi pics you like on the roster....

Carlos

I think they both came out great GRL!

Big-Z: Hey what's the problem? They both look great to me! And the lighting is fine.

Love the Ohka- going to have pick up one for myself.

Love the Ki-43 even better. The silver pencil wear worked out great and I love the grime on the white 'bandages'.

Are those ok or do you want to wait for me to post the roster photos? I'll have to wait till I get back to the home computer sometime tonight or tomorrow night to post them in any case.

Great accomplished Carlos

What's wrong about george? to me seems more than acceptable

OK...here are some more pics...sorry about the lighting....I need to get a better set up for taking pics....I will post more pics on the Aircraft threads...Not too happy with the Oscar...I rate it as acceptable....GRL

First....Ohka....

now Oscar...

and the 2 together for scale...