Airfix Group Build 2011-2012

The higher grit options wont remove any detail. they just remove the microscratches from the surface. 1000 grit is way too coarse. 

This is what i use.

http://store.spruebrothers.com/hobby-sanding-sheets-micro-fine-5-sheets-of-various-grits-302-p21272.aspx

And this is the clear coat you want.

http://www.floorcareproducts.com/floor-finish/index.asp

Im sure one of the other European boys on here will know what the equivalent is in your part of the world.

Also just found this on the johnsons website.

From Giuseppe about Finding Pledge Premium Finish with Future Shine in Italy

Dear SC Johnson, I kindly ask you where is possible, and if is possible, to find the Pledge® Premium Finish with Future® Shine in Italy (of course also with different names). Looking to hearing you soon I send my personal regards - Giuseppe from Pescara (Italy)

It’s good to hear from you, Giuseppe. Thank you so much for the question.

Since you are inquiring about a product that would be sold in Italy, you will want to get in touch with our subsidiary there. They’ll have much more information than we do. They are located in Milano and their local telephone number is: 02-93371.

They will be glad to help!  

whow really fine sandpaper are

many thanx for the informations mikey, but ... future... mmm ... i'm probably again on old school, but  as i read and as i see is a sort of wax for cleaning duty, i'm really fear the duration for years.. i have oldest kits coated with humbrol or model master clear coats and sure that resist more of 20 years, we are all sure about the future will resist... in future? someone have a model finished with future 20 years ago?

just found on one of my customers have some future cans at 7,5 euros. 

thanks friend but too many doubt i have about this product

bsyamato   I would like to put in my 2 cents worth to help you with the window issue. I would wet sand it the best you can with ultra fine sandpaper and what I have done is use toothpaste and qtips to polish the scratches out the rest of the way. And put future over that. I had some CA glue drip in the middle of a car windshield and run to the edge and was able to sand and polish it out and it is not visable.

Damon

the damage was in the middle of window and it looks great. I didnt think it could be done but here is the proof.

I have a question for everyone. I see a flightpath model being built what other kits used airfix planes in there kits?  I have some Encore models did they use Airfix or mostly Frog madels in their kits?

i decidede that im going to do the 1:72 Hawker Hurricane Mk1, i might do another.

Current progress.

Nice shes looking good.

Thanks.I hope I keep it looking good.I'm not much of an aircraft guy.

nomad68

I have a question for everyone. I see a flightpath model being built what other kits used airfix planes in there kits?  I have some Encore models did they use Airfix or mostly Frog madels in their kits?

I'm not sure of the "geneology" of most of these kits, but I can tell you that Airfix, Heller and MPC all traded moulds around. Not sure about Encore.

Base clor almost complete.

Can anyone tell me if this colour scheme is accurate? I thing there should be a sky band around the fuselage close to the tail?

First camo color applied.I'm really starting to dig on this little bird!

Jafa:  the color/colour scheme is accurate to the time period, August 1940.  The band was an identification aid only added after the Battle of Britain.

nice lookin warlus TD. where's the cockpit?

i'm working on the scout doors, i cut of the original and scratch news from clear plastic sheet

Scorpiomikey - I have an update for my build!! I still plan on the He177 as I get further into fall, but I have somehow managed to start work on a Mirage F1c while on my lunch break yesterday, painting a bunch of the cockpit at home last night... I'm sick!

What's wrong on the greif vance? (aargh! the f-1c !!! another plane on  my wishlist) 

mine is again on speeping mode

but suppose the airfix is a little less detailed than the revell kit, at least post some sprue before to build

Nothing wrong with the Greif bsyamato. I have it tucked away in the stash until I can sit down and spend a good amount of time on it. The Mirage was sitting in my office with a few others. If I find a few minutes at lunch or while waiting for my wife to arrive I will open up one of these little kits & do some basic work. SO this one was accidentally started before the Heinkel!

LoL

bsyamato

nice lookin warlus TD. where's the cockpit?

What cockpit? Its literally a plastic bench for the pilot to sit on, thats it. There is no other internal detail.

Scorpion, I'm officially doing the 1/600 HMS Warspite. It might be a while before I start, I have a backlog of planes I have to finish first, not to mention occasional balsa distractions

Mike

Greenshirt

Jafa, the band was required beginning December 1940. For that subject no band is correct.

Thanks for that, is the camo pattern close to accurate? given that its a "odd" serial I think it should be a "B" pattern.

Kia Kaha

Jafa

Scorpiomikey

 

bsyamato:

 

nice lookin warlus TD. where's the cockpit?

 

 

What cockpit? Its literally a plastic bench for the pilot to sit on, thats it. There is no other internal detail.

Better fill up that space with a large pilot wearing cold-weather kit so the inside can't be seen! The Mirage has ribs showing on the cockpit sidewalls, no instruments/switches etc. No control stick (or floor!). Not sure that I want to get into scratching anything at that scale, considering what will be seen once she's buttoned up. I think I may offset some control surfaces though...

Jafa,

Based on what little can be seen of the aircraft in this pic, I'd say Airfix is right.

[View:/themes/fsm/utility/:550:0]

Pilot Officer Hardy was shot down over the Channel and crashed near Cherbourg.  The damage behind the cockpit occurred when Hardy used his demolition charge to destroy sensitive electronics.  Hope this helps.

VanceCrozier

 

Scorpiomikey:

 

 

bsyamato:

 

nice lookin warlus TD. where's the cockpit?

 

 

What cockpit? Its literally a plastic bench for the pilot to sit on, thats it. There is no other internal detail.

 

 

Better fill up that space with a large pilot wearing cold-weather kit so the inside can't be seen! The Mirage has ribs showing on the cockpit sidewalls, no instruments/switches etc. No control stick (or floor!). Not sure that I want to get into scratching anything at that scale, considering what will be seen once she's buttoned up. I think I may offset some control surfaces though...

LoL bis  that's the way i'm gonna rock ' n' scratch (ac/dc citation)

vance ,at least the f-1 fit good?

bsyamato

 

 

LoL bis  that's the way i'm gonna rock ' n' scratch (ac/dc citation)

vance ,at least the f-1 fit good?

The dry-fit of the Mirage parts looks pretty good actually. The elevators are all-flying pieces, so I'm going to have to fill the open area in the fuselage sides with some styrene before attaching them, maybe a little piece of brass rod to help strengthen the joint?

to fix it or to allow movements? if for fix as you see on my scout rotor they sure improve the fix, now the fixed rotor arm resist to 12,7 mm bullets

bsyamato

to fix it or to allow movements? if for fix as you see on my scout rotor they sure improve the fix, now the fixed rotor arm resist to 12,7 mm bullets

Well it won't need to move, I'll be gluing it solid. I really just need to fill the gap that  the tabs should fill if I had left it alone in the first place. I probably should narrow the slice down until it is more of a pin shape rather than add brass rod - adding brass is more than I need to do?

(This is the kit, btw)