50th Anniversary Vietnam War Group Build

What the heck, add me with some sort of 1/35 vehicle.

BTW, in case someone isn't sure what was used in VN, here's a somewhat complete list: en.wikipedia.org/.../Weapons_of_the_Vietnam_War

Good list there Pyr! I will get you added to the front page here on the roster. Great to have you onboard. Once you decide upon your kits, let me know.

Very cool link pyrman64 I book marked that one

stikpusher can you add me please? i got the trumpeter SA-2 guideline missile and transporter ready for this GB!

Manuel

Hey Pyrman64, great reference!  Thanks for posting!

Eagle90

Yo Stik,  I'm in with a cross post from SoMM's GB.  1/48 F-100c 35 TFW, 120th TFS Phan Rang. All done up in glorious SEA camo.

Thanks, Marty

Manuel & Marty, you are added to the roster. Welcome aboard guys! Manuel, I presume that is the the 1/35 scale kit from Trumpter of the SA-2 w/transporter? Marty, I presume that your 1/48 F-100C is the Trumpeter kit?

Stik can you sign me up for a Tamiya M48A3 Patton in 1/35.

jibber, you are added to the list. And I am very happy to see a tank! A big welcome to you here!

Stik I'm thinking about adding a M88A1 if I can figure out which kit to buy. I've been wanting to do one  that hooks up to a battled damage piece of equipment, an artillery piece, personnel carrier etc but I believe that the 88 is capable of lifting 70 ton that can easily cover a 50 ton Patton. So please put me down for both vehicles, I think that would be a nice DIO and compliment the Nam GB. The timeline is perfect with all the others going, thanks for hosting this one.

Terry

Terry - for Vietnam you need a A-nothing variant of the M88. A1 came later, in 1977. And I believe the capability of the A-nothing is 56 tons, that's for pulling, for lifting it would be much less than that. On one photo I had there were two M88's loading a mine-damaged M48A3 onto a lowboy. But good luck with your project!

Paweł

Jibber, AFV Club does (or did) a Vietnam M88. Those things are a beast to watch in action. I do recall once seeing one lift a M113 in our battalion motor pool so the crew could chage a road wheel. Rather than using the "by the book" method of the "dog bone" tool to lift the road wheel arm to do the same task.

So you will be doing a M48 and M88, both in 1/35? Sweet!!!

jibber

Stik I'm thinking about adding a M88A1 if I can figure out which kit to buy. I've been wanting to do one  that hooks up to a battled damage piece of equipment, an artillery piece, personnel carrier etc but I believe that the 88 is capable of lifting 70 ton that can easily cover a 50 ton Patton. So please put me down for both vehicles, I think that would be a nice DIO and compliment the Nam GB. The timeline is perfect with all the others going, thanks for hosting this one.

Terry

This is the kit you need to find

Stik still thinking on this one..but the 88 is in I just had a Patton sitting around on the shelf. I'll see what I can find on the lifting capabilities of the 88 and Pawel thanks for the info.

AFV M88 in 1/35 and I'll add another piece later.  

Stik I have some time but I may have backed myself into a corner, might be a tough kit to find. I'll stay on it I really want to build that one.

Ok, sounds good to me. I hope that you can find it somewhere. It's not your run of the mill entry for any GB, so I really like that aspect.

Even though that Wiki list doesn't include them, you will want to accept anyone that wants to do an SP-5B, TF-9J or a bunch of the different P-2s. I only mention it because I have an AP-2H that is at the last stage of getting ready to build. I have everything except the metal landing gear and I need to acquire more Napes for Napalm Nellie. The TF-9J was used for Marine Fast FAC use until swapped out for TA-4Fs.

Rex

ps, I just noticed that the T-28 Trojan isn't on their list, too

Yeah, I noticed some AFVs missing from there as well. A good list, but not all inclusive.

I have never participated in a group build, but might as well get my feet wet. I have a AFV Club 1/35 M35A1 in my stash that looks like it will work.

Roger

Stik I've ordered the AFV M88 kit and my plan is to build it to this picture holding an M113. I'll try and replicate as best I can. Terry

I'm not sure if there were any UFO's seen in Nam, maybe a couple hallucinations but here's the right picture.  Sorry..

That will be awesome jibber! I have seen that sort of thing myself up close firsthand. It is quite impressive to see one vehicle picking up another like that.

This'll take a little time but I'll get it in. It wasn't so easy getting my hands on that AFV kit, I hope it comes in decent shape. I found it from a guy in France. Just can't find these vintage kits like you used to.  

No, some kits are getting harder and harder to find.

Hey, I see a couple of guys mentioning the Italeri C-119 Flying Boxcar or some variation there of.  Is there a chance that anyone has the instructions for one of these kits in a PDF format they wouldn't mind sharing???

I got a great 'builders lot' box of kit parts from Evilbay awhile back and one of the kits included was the  1/72nd scale Italeri AC-119 Stinger.  It appears that all of the parts are there, but I'm just not sure of the assembly sequence.

Thanks for any help!

Dave

Hello Dave!

Maybe this will help you:

www.mojehobby.pl/.../Fairchild-AC-119K-Gunship.html

Good luck and have a nice day

Paweł

Pawel,

That's exactly what I needed!!  Thank you so much for the link!!! 

I'll see you in the Group Build!

Dave

Hey guys, I would love to jump in on this one. I'll be a TBA for now until I find something to build. I'm currently working on the F-4c from academy, but that will be finished by the time the GB starts.

Ok Greg, you are onboard.