50th Anniversary Vietnam War Group Build

Weathering looks good on the m113 nice work.

Pawel-very nice build indeed!

Thanks a lot, Stik!

That is looking very sharp Pawel! I really like the fishing line static dissipators. An excelling added detail.

Hello!

Stik - like I wrote, that M113 is lookin' good! I also like that recoilless rifle a lot!

I also did some work on my Whale - I managed to spray a semi-matt coat on the whole model. That helped to finally blend the decals with their surroundings. With that final coat on, I could at last unmask the cockpit. I'm glad I haven't found any nasty surprises under there, although the close up photos show all the minor finish problems that cannot be seen from the distance:

I also put the flaps and slats on. Especially the flaps weren't that easy to put on. Also note the static charge dissipators on the wing tips - I made them out of thin plastic fishing line, so as to keep them from breaking off:

At the same time I also installed the arresting hook:

You could say - just a few more details and it's done - but such things usually take me a lot of time, so let's see how it goes. I hope you liked it - thanks for reading and have a nice day

Paweł

on this one Stik!

SB & Rob, thank you guys. I am happy to hear that you like this build.

wicked Stik! Congrats...she turned out fantastic

Very very cool Stik! I love the weathering, it looks like it just drove in after a rainstorm.

As I said yesterday, a better walkaround of my completed 113 today

OK, here we go... My completed ARVN M113, 4th Squadron, 2nd Armored Cavalry, Ap Bac Vietnam,  January 2, 1963

Thanks for looking, and thanks to FSM for hosting this Group Build.But... I must confess that there will be one last addition in a day or so. I was doing some final research for this build the other day and I came across the tidbit of info that the ARVN Armored Cavalry in 1962 re equipped from rocket launchers (bazookas) to M18 57mm Recoilless Rifles. I dug thru my stash and sure enough I had one left from a Tamiya US Weapons Set. BUT, it is on the same tripod mount as a M1919 .30 cal. So I had to modify it for shoulder fire as carried by the ARVN tracks. I also found a bag in my spares bin that looks close enough for the shoulder bag used by gunners and loaders to carry the rounds.

so here is the Rifle and Bag so far

and a couple of close ups of the mods I did to make the folding bipod/shoulder rest

so I will get it painted up and added to the top deck in the next day or two... with some photos of course...

Thanks Pawel. No I have not yet tried using Future for wet stains on a vehicle... yet... I had thought about it though, and if I do come up with a scenario to do one like that, I will. I can imagine that the effect would be just right. All I can say is that the stuff is very handy to use in this hobby.

Hello everybody!

Stik - that M113 looks very good! I like the tie-downs a lot. The mud looks good, too. Did you ever try to paint wet stains on the vehicle using future? That worked for me very good.

Rob S. - thanks a lot for your kind words! Didn't the whale have a long and interesting career?

Bob - thank you very much! I'd like to finish that baby, too - but I still need some time on it, plus some trick to correct the wheels.

Good luck with your builds and have a nice day

Paweł

As I suspected yesterday, once dry, the "wet mud" came out a little lighter than I wanted... too much thinner and not enough paint I guess...

so today I went and mixed up a new mix of Future, thinner and Burnt Umber acrylic to get a nice "wet mud" look and got that applied where I wanted. Then a mix of a wash of Grimy Black for fuel and oil spills on the appropriate spots and finally some soot in the exhaust. I am calling this one done...

I will get a proper all angle and detail shots batch of photos up tomorrow on my day off.

Thanks for the kind words guys! I am glad that you like it.

Well the mud was freshly applied and still drying when I took the photos that I posted on Sunday. Here is how it came out after drying to the lighter shade that I wanted and mixed up.

as you can see it is much lighter and toned down that when still damp...

Today I added the darker "wet rice paddy mud"

I think that I am going to need to go back tomorrow and do some touch up with the Burnt Umber paint to get the proper look that I want. Plus I still need to add some fuel & oil spillage... 

One more session at the bench...

Thanks for that Stik..your technique is solid!! Well done!!

Pawel-very nice build-weathering looks great-looking forward to seeing the finished product

Stik-the attention to detail is fantastic and the mud/dust combination is outstanding-great job!

Well I start with finely sifted dirt out of my yard, then I mixed up some burnt sienna and raw sienna MM Acrlylic for color and thinned that out, then I added Future to the mix to lock it place once it dries. I add more dirt to give it a grainier look. Less dirt gives a more smooth silty type of mud. In this case I actually mixed the paint color first, and thinned it, then added the Future before I put any dirt in there.

Fantastic Stik...can you reveal what you used for the mud compound?

Pawel...that Whale is looking gorgeous..I gotta admit I don't know that aircraft, so, I am doing some Wiki reading on it now..

Yeah, that mud is really good! If I may suggest something, I'd put more "old dirt" on the ramp - now it looks like the grunts tramped on a freshly washed ramp. Otherwise I just admire it . Good luck with your build and have a nice day

Paweł

Loving that Stik, very nice mud application.

Very cool Stik!

Today I started my favorite part of the weathering- MUD!!! I am doing that in two stages. a more gainy lighter color mud to represent the more grainy gloppy mud of the roads and trails... it is still drying here so a bit darker than it should look once dry

and of course the stuff tracked in by the troops carried when they would re mount the track

My final step will be to add a layer of fresh wet darker, siltier ride paddy mud to represent as they would have looked during and immediately after the Battle at Ap Bac. That will come in a few days due to work...

Pawel, that Whale is looking better and better! I am very impressed by your work here on this!

Here is some detail shots of the final bits added before weathering... tie down straps, lenses, antenna...

and with initial weathering...

I still want to add a bit more before I call it done...

Hello Stik!

I for myself, try not to set deadlines for my modelling - most time I did, the projects got delayed, by a lot of time.

Looking forward to see your M113 weathered - my Whale currently looks like on the photos below:

I finished putting the decals on and started to weather the surface - it's also mostly done. I used dark gray paint (Humbrol 32) thinned with turpentine - put that on the surface detail, waited to dry a little and then I removed the excess with a Q-tip dampened with airbrush thinner. In places where the lines were too shallow I pencilled them in.. The airbrush thinner also washes pencil off, should it slip. The next thing to do would be to put a satin clear coat on top of that and then start the final assembly. Still waiting for the custom PE to correct the wheels.

Thanks for reading and I hope you liked the pictures - good luck with your builds and have a nice day

Paweł

I will give it a moderate amount of weathering. But, alas, all has not gone well today. What was supposed to be a 90 minute errand for tires & alignment is now well over 3 hours and counting... So I am looking at later this evening or tomorrow morning... Who knows?

Hello Stik,

that M113 looks very nice - and clean, I wonder how heavy are you going to weather it. I'm in process of dirtying up my Whale right now, too! Good luck with the finish, and have a nice day

Paweł

Thank you sir. If all goes well, in about 24 hours I will call this one done.

VERY sexy Stik...Well done thus far...looking forward to the big finish!!

Yes Pawel, we had a good turn out of completed builds, but many more who signed up, especially land and water subjects, did not happen. Next time I hope...

Well this past week of so the urge to work on this has returned and I am now in the final phase... yes it is past due, but oh well... to quote Patsy, "It's only a model"

so in the past few days I have been doing little stuff getting the small detail painted up, like the machine guns & tail lights, plush dry brushing worn areas on the MGs and the pioneer tools. I also added some foil straps to some proper jerry cans in my spares bin and glued those in place. And then today I airbrushed on a coat of Humbrol Matt Clear (my personal favorite flat clear coat... absolutely dead flat and total control applied with an airbrush)... After that had dried I added the final top deck stowage of a tarp, some ammo cans & a crate... I still need to add some tie down straps for the .30 cal tripod...

Tomorrow I will paint the last details like headlights, tail light lenses, periscope lenses, add an antenna, and then final weathering after that... finish line dead ahead...

Scott - a very nice-looking SLUF, I like it a lot! Maybe a bit clean, but looks sharp, anyhow!

Stik - funny thing, of the few ground-themed subjects, even fewer were actually done - it's a pity. Even more sad is that we have had no sailors here. Well - I guess we can't help it any more.

Good luck with your builds and have a nice day

Paweł