Yes, if I did not have to work today, it would be all done. I will have it completed by Friday. I only have two mornings before work before then to have any time to work on this.

Glad to see you found the other photos. Very cool, even with the added detail looks like you're going to make the Weekend Build end date. Looking forward to seeing her all finished up.

So last nite before bed I was looking thru my laptops photo library, nd low and behold the "missing" photos had loaded into the main portion, rather than into a sub folder as they had been doing... so I edited them, uploaded them to PB, and went to sleep....

the final cockpit photos before I closed it up

wings and tailplane glued on

bomb shackle attachment lug (taken off of a Panzer III roadwheel arm). I also drilled away the kit front sight post for replacement with some styrene rod

canopy masked and glued in place

styrene shim for gap filling, sanded to match the sourrounding area

new front sight post added

rocket motor nozzles, and control surface balance horns (not bad small details for a 50+ year old kit)

base paint coat on, Tamiya IJN Gray Green

and after this I did the Future coat and decals that were in the photos in the post before this... The Cherry Blossom decal is from the kit, but the ID numbers shattered, so I took some IJN tail code decals and cut off the 1st prefix letter and last suffix number to make a replacement set...

so the post above is how the kit looks this morning.

Here is where I had reached before I left for AMPS this afternoon. I scrounged up some new decals to replace the kit ID numbers that shattered... that just put the topping on my afternoon with this kit...

and teh replaced front sight post and the improvised attachment lug scrounged from my spares bin.

Tomorrow morning I will finish this up...

Yeah, I chose the wrong weekend to do this... But then again every weekend at this time of year is bad... 

Ouch, that blows for the weekend build but you still have plenty of time here- good luck! Everything looks cool so far.

 Stinking computers and chips and trying to upload photos is not working. And I do not have the time to figure it out today. I'll see if I can get my updates loaded soe other time...

0035 hrs here, I am gonna post these photos and call it a night...

I did a long airbrush session this evening after dinner and painted all the interior components

when test fitted, now everything looks uniform in color...

decals applied for the instruments and the fuselage halves glued together, plus paint scraped away from teh seat mounts and the area where the stick & rudder bar assembly will go

I'm gonna let it dry overnite, sand the seams in the morning, attach the wings, tailplane and canopy, then get the base paint on....

Thank you Gamera. I have most of the interior paiting done now a bit over 24 hours in and am almost ready to close up the fuselage halves. I need to let my current work dry, apply some instrument decals and then I can close it all up and call the interior done. More photos coming soon...

Looks awesome to me SP!

Keep It Simple... 

Too bad I can't follow my own advice...

completed scratch built IP

this is what I am shooting for

then my sidewall work...

with seat, IP, and stick & rudder bar assembly

and all placed together for how it will fit

all ready for interior painting in a bit once it has some time to dry...

Well here are a few update photos. I have mostly been doing scratch work. I finally found a good photo of an original Ohka seat and saw that it had rounded upper corners so a bit of filing and it was better. Of course the lightening hole pattern does no match, but hey, at least it looks close. I also created the rudder bar, a contol stick and someof the linkage. As well as starting work on the IP. Lots of filing and hollowing out are in store ahead.

I also installed some rear cockpit decking and more interior work

and of course seam clean up and hollowing out the rocket motor nozzle walls... those things must have been a good 2mm thick originally... now much better

more to come later on...

Yup, we shall close this out quick and with a bang 

Awesome SP, thanks for taking us out with a bomb (literally!) 

I'll go put you down though you'll be finished by the time I get you down! 

PS: Yeah, you're not the only one, PhotoBucket used to be great, but the new format (no I don't want to tell a story with my photos) and all the video clip ads have made it more and more annoying. I know more than a few who have given up on the site and moved on to greener pastures. 

Thanks... well I kicked off at around 2039 hrs. Pacific Standard Time, and I have been working for the past coupe hours

let me just say, that trying to get these photos uploaded has taken me a good 30 minutes due to the usual POS quality of Photbucket... I do HATE their site since they revamped it a couple summers back...

anyways, I am replacing the kit seat, that you see in the middle here and ditching the pilot... I think you can see why. I pulled the seat on the left out of my spares bin (from a Tamiya Ki-84) and modified it to a typical Japanese aircraft seat. I have only found a couple period photos of the Ohka's cockpit, and none show the seat clearly. All the musueam stuff today shows a variety of seats so, I guess I am using hisotrical license here...

sub assemblies built so far- wings, tailplane, rocket engines... I'll do seam clean up tomorrow

a backing for the instrument panel. Tomorrow I will do the real work on that.

stand, since the kit does not come with the ground handling dolly that these things are photograhed upon in period photos

and a couple shots of the fuselage so far. some beginning of interior framework, and the fuselage rear bulkheads in place drying to proper postion. The fuselage halves are not yet glued together, only head to gether for the bulkhead placement and those are glued only to one side.

I have also dipped the canopy in Future and that is drying now...

Alrighty then, I am gonna kick off my Pt.IV (shi?) build, and crossover with the 48 hr/ Weekend Madness GB... nothing fancy, just the Testors rebox of the classic Hawk Yokosuka MXY7 Okha. Although I am going to upgrade the cockpit, as it is quite minmal.

Hadn't noticed how fast this year is coming to a close... 

I'll see about getting the thread for JGB V posted sometime this weekend guys! 

Great work there on the engine, I did a few in 1/48th- must be tiny in 1/72nd.

Last night finished the engine!

removed previous rear wires and restarted them from the top front of the engine 

Hey Scott, just got you posted to the front page. Nice work and thanks again for joining us! 

Nicely done Zero Scott 

Just a tip for the canopy, better result if the canopy frames comes in matt (or semi-matt) finish as the rest of the fuselage :)

Beautiful job there Scott, thanks for joining us! 

I'll try to get you posted by the weekend. 

Thank you

Looks beautiful Scott, a fine example of the Zero

regards,

Jack

Well group, I think I am finished with this model.  Had a few ups and downs but overall, I'm happy with it.  

nope :)

Cool Bsyamato, I was thinking you only liked the battleships the fly though space though

Finger actually ok, waiting just for new skin (problems in the nail zones ) to cure better so i can use the needed CA glue to finish the engine and close the Rufe :)

Great pictures Cliff  as my noickname says i love battleships :D