Oh, you should post some of your tanks over on the armour forum.

And if you run over don't worry about it, same rules on if you want to carry over to the next GB it's fine. 

It's a good kit Cliff and must be able to finish in time with the GB

Gamera

..

A Jagdtiger, you do armour too Bsyamato? 

 

Yes, i like to build 1/72 veichles too , but withouth modifies , jus as fun builds :D

Heres 3 subject under discountinuous wip

Not a whole lot of parts but it does look nicely detailed. Love your rudder pedals there. 

A Jagdtiger, you do armour too Bsyamato? 

Thanks Clif :)

And started the Pete yesterday!

Box'n'sprues

Sorry, post-shading- I always get the two mixed up! 

You're moving right along on the Peggy there!

Gamera

They look great as usual Bsyamato! I have to tell you again I love how you pre-shade using a brush, I still can't get over how you do this. And those crazy canopies- so much work! 

 

Thanx Cliff :D but i can't use preshading... just postshading .. at least i think i can't use  

speed up on the Peggy, last kakhi layer this afternoon 

And let it dry in the hangar :)

They look great as usual Bsyamato! I have to tell you again I love how you pre-shade using a brush, I still can't get over how you do this. And those crazy canopies- so much work! 

Sorry for the mishap Jack, but i'm sure you will get the biplane better than before :)

Unfreezed the Peggy and the Kate this weekend :)

I mixed up a japanese light grey green (i use a 147 grey with a small percentage of 78 interior green humbrol) and three layers done between two days. Also , as the grey mix dry rapidly i mixed an homemade kakhi color for upper surfaces, first strike lightly then i corrected the mix (a total of 5/6 colors used starting from 155 oluive drab  ) and the mixture is good from last saturnday and works again!!

some paint step:

First grey layer (withouth primer..)

Ouch that blows Jack, glad to hear though she didn't fall any further though!

Sounds really cool, looking forward to seeing her all painted up. I find short run kits enough problems to get a smooth finish without them having to be metallic perfect.

bsyamato, thanks kindly.

Had a little mishap during the primer stage.  While spraying the model, it slipped off the wooden dowl I had inserted at the front to act as a hand hold .  The fall wasn't even a foot, but it was enough of an impact to knock the top wing off.  Took this as I sign to keep painting unattached.

Did two coats of Tamiya surface primer, followed by three with Alcad II gloss black base - as suggested for metallic finishes.  Each of these coats was followed with some further putty and sanding, and I was still getting some stubborn seams and dimples. 

So instead of going back with pure primer, I mixed in a little Alcad's black, and this is what you see in this update photo.  Hopeful one last sanding, another gloss black coat and then to the metallic colours.

regards,

Jack

Thanks for cooments guys , soon i'll back with the kawasaki and hope with the other subjects.. recently received a new canopy for the kate so i can finish it too (too difficulties to manage my own version of canopy)

jgeratic

bsyamato, great start on another chopper.  Really busy wiring there, and an excellent find to replicate the interior material.

------------------------------------

Can't believe a month has passed since my last update.  Figured I'd be finished by now, but only have made it to the primer stage.

I'll let the photographs do the talking, but you will notice the build is peppered with the sculpting putty known as Green Stuff.  Used it everywhere, from seams to fixing details and even scratch building.

regards,

Jack

 

Excellent build Jack :) i think that with a similar kit just break all pieces 

Also good updates in the forum options :) finally easy way to found recent posts

Dave, np about the info.  Sorry to read what happened to your great uncle, but building  the Nakajima E8N would be a fine tribute to his memory.  Cliff has you set up nicely with the link to the Hasegawa kit.  Just recently released, new tool and all, looks to be the only game in town at 1/48 scale.

regards,

Jack

John, thanks for the support. I'm aiming at a start date on Jan. 1st 2016. I've gotten used to running for a them a year now. I'll see about posting something about sign-ups around middle November or later. 

Ooooo!  when are you planning on GB 5?  I have a 1/72 Tojo I'd love to do that for.

John

BTW: lemme throw up the trailer for 'The Eternal Zero'...

Ok, krap I can't get it to enbed, well here's a link to YouTube in any case...

Hey Dave, seems I missed your next to late post there. That sucks about your great uncle, one of my uncles served on a LST but was lucky to make it though the war. 

I had to look it up but 'Dave' corresponds to a Nakajima E8N. Hasegawa seems to have a kit available in 1/48th- link here to HLJ.

I'm intending to run a Japanese GB V so if you want you can aways enter in that one. I'm thinking of taking a break after number 5 though! 

Gamera

Hey Dave, good to hear from you and congrats on a great deal there! They're out there if you know where to find them or stumble upon them! The Hasegawa Ki-43 is a great little kit, simple but nicely detailed with great fit and no issues. I've got two of the Finemolds Type 95s but haven't picked up the newer Dragon kit yet. Sounds like a winner though. 

Jack, I haven't seen any records of such but I'm wondering if any ended up used as kamikaze attackers since by the end of the war lots of older types that would have a hard time surviving in a combat situation were being thrown out on one-way missions. 

 

Dave

Thanks Jack, I figured as much. I'd read that the Japanese were even fitting up trainers with bombs to hit the Allied invasion fleet that never came.

BTW the Japanese movie 'The Eternal Zero' (awesome movie!!!) has a great scene of two of the major characters in  Zero model 51s escorting kamikaze Zero model 21s though a swarm of Hellcats into the USN fleet. 

Hey Jack,

Thanks for the info.  I was curious because the plane resembles a bi-wing float plane trainer called the "Dave" manufactured by Kawashini (sp?) or something like that. My great uncle was killed on the deck of the USS Morrison, DD 560, by a similar aircraft.  It skimmed along the water, below radar and attacked the rear of the ship near my great uncle Gil's AA machinegun mount.  I'm still trying to locate a kit of that plane.....

TAD

Very likely on the kamikaze mission.  The few entries I've read about the A4N1 on net do mention this fact, but no numbers, dates or successes provided.

regards,

Jack

Hey Dave, good to hear from you and congrats on a great deal there! They're out there if you know where to find them or stumble upon them! The Hasegawa Ki-43 is a great little kit, simple but nicely detailed with great fit and no issues. I've got two of the Finemolds Type 95s but haven't picked up the newer Dragon kit yet. Sounds like a winner though. 

Jack, I haven't seen any records of such but I'm wondering if any ended up used as kamikaze attackers since by the end of the war lots of older types that would have a hard time surviving in a combat situation were being thrown out on one-way missions. 

Thank you Cliff and Dave.

Good stuff on the shopping spree, those prices can't be beat even on a black friday event.

Yes, this is a resin model, so I'd consider it falls under the short run category.   The Nakajima A4N1 was an interwar biplane specifically ordered for carrier use, and would be the last biplane design.   It's successor being the Claude, which in turn would be replaced by the Zero.   In 1941, it still could be found serving on 2nd rate carriers, and would also continue in the training role.

regards,

Jack

Hey Jack, not sure what plane that is, but I'm guessing it is a trainer of some type?  Good progress so far, is that a limited run kit?

Bsyamato - great effort on your CH-46 conversion!!  you must be crazy to put all those gauge backs and wires on each instrument...Wow!! I agree with you on the troop seats in the main cargo area....that's pretty poor representation of the tube frames and mesh seats.....It wouldn't be impossible to fix them but it would be very tedious.  But if anyone is up for the challenge, it would be you!!

Coming back through Tennessee from Alabama, I happened upon a HobbyTown USA in Knoxville and happened upon some choice kits on sale for 75% off!!! I about passed out thinking that it was too good to be true.  Among the scores were two Japanese subjects: a Dragon 1/35th scale Type 95 light tank "Ha-Go" (Late Production) and a Hasegawa 1/48th scale Nakajima Ki43-III Hayabusa (Oscar). Both retail at $50 or more and I got them both for around $10 to $13 apiece.!!!!  I ended up walking out with a total of about $400 worth of kits for $106!!!

TAD

Looks terrific Jack! Now that's a pound of putty... 

Sorry, I haven't been more active, I've been under the weather and haven't gotten much of anything done period. 

bsyamato, great start on another chopper.  Really busy wiring there, and an excellent find to replicate the interior material.

------------------------------------

Can't believe a month has passed since my last update.  Figured I'd be finished by now, but only have made it to the primer stage.

I'll let the photographs do the talking, but you will notice the build is peppered with the sculpting putty known as Green Stuff.  Used it everywhere, from seams to fixing details and even scratch building.

regards,

Jack

Thanks some nice conversion work there Bsyamato, lots of wiring and great idea on the rubber table cloth.

PS: I forgot about the pink chopper on Riptide, I think they called it the 'Screaming Mimi' or something like that- another interesting idea for a chopper build!

Thanx for comments guys 

Waynec i think is not hard to find minigun for the mh-6 version, probably a spooky ac-47 or other gunships can be good donor, for the japanse version , probably i left some perfect mods ,  because jsdf OH-6 seems have probably the shorter version of gears and some minor mods.. 

Jack i had the same idea about the Magnum PI version of the h-500, the kit could easily used for the civil version .. i need just to find another copy of the kit, also i have a wessex from matchbox that i will use for riptide pink S-58T 

Ps just some day ago i discovered that the TC's helicopter used in the show recently crashed :(

So .. here the "roosted" kv-107

Box'n'sprues as usual:

new holes for exhaust 

closing the upper hole in the cockpit with plasticard rectangle

Hobby boss missed another important detail common to the versions, four air intakes on the front of rotor basement

That's all for now , next time live updates :D

Bsyamato: Okie-Dokie, just updated you with the KV-107.

Jack: I think so, TC's chopper looked like a Hughes 500 which is a civilian version of the MC 500. I remember one or more of these with a fake gun strapped to one skid and a rocket launcher strapped to the other showed up in about half the episodes of Airwolf too! 

Bsyamato, great job with the little chopper. 

Dating myself, but from the Magnum PI series, didn't his buddy TC fly a civilian version of one of these?

regards,

Jack

-------------

ps. thanks for comments on the resin Nakajima.  I've continued with the brass pins and  have the lower wings and tails planes set in place.  Will post some more progress soon.