SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

ARMOR - Small AFV Group Build, all scales done

42306 views
587 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Posted by Anonymous on Sunday, May 23, 2004 9:33 AM
Manik: Washes is how I get the majority of my weathering done now as far as giving your 223 a dusty look I would try a couple things myself i:e very thinned white and desert yellow paint on the surfaces,, Remember as I am sure you know dust gets every where,, even spots you didn't think it could. I have been in the military for 19 years and have seen the dust kicked up by vehicles and let me tell you, everything gets dusty so I wouldn't worry if you get the dusty look in places you wouldn't expect dust.

T3488g I am doing a M8 armoured car,, me personally I wouldn't see a problem with you doing a 8 rad. Just my opinion,, but then again I am not running the build so its not my decision.

Progress report. Will have pics up and then emailed of my finished 222. Aftermuch panic I found my instructions for my M8 and will begin the building process tonight. Hope all is well with the rest of your builds. From what I can see in some of the Pics I would say yes.
  • Member since
    November 2005
Posted by Anonymous on Sunday, May 23, 2004 12:52 AM
sorry guys, i'm not going to be able to build a small afvSad [:(] never got to buy the models, and now i ran out of money (gas is expensive......) i recently got a 8 rad, but i doubt that would be classed as a small afv.Sad [:(]Disapprove [V]
  • Member since
    October 2003
  • From: Clovis, Calif
Posted by rebelreenactor on Saturday, May 22, 2004 2:44 PM
you could try spraying watered down glue on the areas that you want the then sprinkle it with sand . Havent tried it, in fact it just came off my head, so i would have absolutley no idea.
John
  • Member since
    November 2005
Posted by Anonymous on Saturday, May 22, 2004 2:42 PM
QUOTE: Originally posted by ManiK_Impressive

I'm not there yet (School's got me real busy, so much for a long weekend, 2 ISUs to do [unfortunately not the tank destroyers ; ) ]) but how can I show sand on my 223? I used a wash on the tires and I must say it looks very good considering my newbieness, could I do the same thing to the 223 itself?


Sand dust that settled on the vehicle could be done with a wash or pastels.
Don't know about larger amounts of sand.
  • Member since
    November 2005
Posted by Anonymous on Saturday, May 22, 2004 2:30 PM
I'm not there yet (School's got me real busy, so much for a long weekend, 2 ISUs to do [unfortunately not the tank destroyers ; ) ]) but how can I show sand on my 223? I used a wash on the tires and I must say it looks very good considering my newbieness, could I do the same thing to the 223 itself?
  • Member since
    October 2003
  • From: Clovis, Calif
Posted by rebelreenactor on Saturday, May 22, 2004 1:50 PM
OOO not good!
John
  • Member since
    January 2004
  • From: bc,canada
Posted by gdarwin on Saturday, May 22, 2004 12:59 PM
Big Smile [:D] i know the feeling,im doing a ford g.p a jeep, i gor all the mud on and then i noticed i didnt have the decals on [dud] so i had to redo the mud and repaint,then i broke the wisheild frame.Sad [:(]
airborne death from above http://photobucket.com/albums/a350/roygd/
  • Member since
    November 2005
Posted by Anonymous on Saturday, May 22, 2004 11:31 AM
A little progress; added some mud, broke off the door, noticed that I didn't paint the inside of the wheels.
One step foreward...
Will try to get pics up this afternoon.
  • Member since
    November 2005
Posted by Anonymous on Friday, May 21, 2004 7:34 PM
Sorry I havent posted lately but I was in D.C. i saw the WW 2 memorial, Its amazing!

I'm back now and I'm thinking about putting my SAS jeep into a little Dio
  • Member since
    November 2005
Posted by Anonymous on Friday, May 21, 2004 4:14 PM
Looking Good Derek
  • Member since
    November 2005
Posted by Anonymous on Friday, May 21, 2004 1:51 AM
QUOTE: Originally posted by thundergod

lookin good claymore,been thinking about getting that kit is it good?

In a word, yes. I really enjoyed this little kit. Went together easy with no filler at all.
The only Caveat is the tires/wheels, in front there is a little slop where they mount to the trailing arms so care is neede to ensure they are straight. Not knowing exactly how much toe a Kubelwagen should have I posed both to the left as far as possible, It's only a couple degrees but it adds some "life". On the rear use care keeping the rear wheels vertical because the final drive is through reduction gears at the wheel so the wheel center is offset from the axle.
Considering the fit of the rest of the kit (excellent) I think the play in the front was intentional to allow some poseability (the steering gear/pivots would be real tiny and fragile)
  • Member since
    November 2005
Posted by Anonymous on Thursday, May 20, 2004 2:38 PM
lookin good claymore,been thinking about getting that kit is it good?
  • Member since
    September 2011
Posted by fightnjoe on Thursday, May 20, 2004 2:26 PM
claymore your build looks great. thanks for the peek. jkeller dont feel alone i am waiting for dragon imports to email me about a replacement dashplate and decals. so completion will be delayed.

joe

Veterans,

Thank You For Your Sacrifices,

Never To Be Forgotten

Where you can find me:

Workbench on FaceBook  Google Plus  YouTube

  • Member since
    December 2002
  • From: Grand Blanc, MI USA
Posted by jkeller on Thursday, May 20, 2004 11:39 AM
Claymore68, Looks good! I better hurry or I'll be the last to finish. What stage is everyone else at?
  • Member since
    November 2005
Posted by Anonymous on Thursday, May 20, 2004 11:11 AM
An update with pics!
For those that have forgotten I was working on Tamiya's Kubelwagen. It needs weathering and I need to finish painting the fig. The weathering will be finished with the dio (which is almost done and includes a 250/9), the fig painting wil be done soon I hope - I don't have much skill in that arena.


The windshield also needs to be added.

Nice to see the progress on the other builds.

As always comments/critcizms welcome.
  • Member since
    November 2005
Posted by Anonymous on Wednesday, May 19, 2004 9:06 PM
Well Gang just a quick update here on the VA front. The 222 is finished. As soon as I get everything I need for my Digital Camera I will upload Pics. The M8 is under the Gun. The paint gun that is.
  • Member since
    November 2005
Posted by Anonymous on Tuesday, May 18, 2004 6:35 PM
Looking good JK.

Not much to report at this time. Have filled in the multitude of location holes, sink marks, etc on the little Daimler. With all the grey putty it looks part camo'd alreadySmile [:)]

Have scratch built the rear radiator vanes as they are moulded solid on the kit, have added internal nut/bolt detail, thinned the wheel guards to scale thicknes and added detail to side bins.

Next is the missing and incorrect internal detail. Leaving the biggie, the scratched suspension and steering components, to last.
  • Member since
    January 2004
  • From: bc,canada
Posted by gdarwin on Monday, May 17, 2004 12:58 PM
Big Smile [:D] well after a couple of setbacks im just about ready to start to make mud for my ford g.p.a jeep.i have never done this befor so wish me luck. how is the build comeing for the rest of you folksBig Smile [:D]

gdarwin.
airborne death from above http://photobucket.com/albums/a350/roygd/
  • Member since
    November 2005
Posted by Anonymous on Saturday, May 15, 2004 11:13 PM
That's looking really nice Jkeller.
  • Member since
    October 2003
  • From: Clovis, Calif
Posted by rebelreenactor on Saturday, May 15, 2004 8:37 PM
for those of you looking foreward to my dio, Well, lets just say it'll be a good Christmas present. Its a 12" by 16" plaque that will have a tree, some bushes, and an overwhelming amount of Field grass. its gonna take awhile.
John
  • Member since
    October 2003
  • From: Clovis, Calif
Posted by rebelreenactor on Thursday, May 13, 2004 11:18 PM
Looks good so far jkeller
John
  • Member since
    July 2003
  • From: Philippines
Posted by Dwight Ta-ala on Thursday, May 13, 2004 11:06 PM
Pete: Oops. I knew you were kidding around. Just need to make sure. He-he-he.

  • Member since
    September 2011
Posted by fightnjoe on Thursday, May 13, 2004 10:28 PM
looking good.

unfortunately i have suffered a mild setback. i have lost the dash plate. i am in the process of reordering that piece and the decals that go with it.

joe

Veterans,

Thank You For Your Sacrifices,

Never To Be Forgotten

Where you can find me:

Workbench on FaceBook  Google Plus  YouTube

  • Member since
    December 2002
  • From: Grand Blanc, MI USA
Posted by jkeller on Thursday, May 13, 2004 8:20 PM
John, nice job!
I'm not there yet but here are some progress pictures of my Quad. Right now i'm in the process of adding the PE. Next I am going to scratch build the spare tire rack that goes on top of the vehicle then I'll be ready to paint. I've already painted the tires and frame but it still needs some work.

  • Member since
    November 2005
Posted by Anonymous on Thursday, May 13, 2004 8:13 PM
Manik,, I concur with Petbat. Most interiors were white in color. If you use tamiya's Buff color, it will give it that faded look instead of that fresh off the assembly line look.
  • Member since
    November 2005
Posted by Anonymous on Thursday, May 13, 2004 7:22 PM
QUOTE: Originally posted by Dwight Ta-ala

Pete, I believe John is trying to recreate a scene from Saving Private Ryan where the setting is a grassland. I think that he'll put lots of tall grasses to cover the G.I.'s


I was just joking!!!! Being a bit silly about the flat wooden base; I didn't expect that the finished dio would be flat too.

Manik, to the best of my knowledge it was painted the same light buff colour as the interior of the tanks were (Tamiya Buff is about right). Gray is definately wrong, at least for the forward driver area, as it is too dark to see inside if it is gray.

If you go to http://afvinteriors.hobbyvista.com/222/222a.html you will see some colour pics of the inside of a restored 222 vehicle. Whilst Mike states that he cannot categorically confirm the layout of the equipment he doesn't mention whether the colour might be off.
  • Member since
    November 2005
Posted by Anonymous on Thursday, May 13, 2004 4:31 PM
Wow! That 251 looks awesome!

Can anyone tell me the interior colour of the 223, is it white or panzer grey?
  • Member since
    November 2005
Posted by Anonymous on Thursday, May 13, 2004 7:54 AM
John Awesome looking Halftrack. Cant wait to see the diaroma.
  • Member since
    November 2005
Posted by Anonymous on Thursday, May 13, 2004 7:53 AM
Sign - Ditto [#ditto]

thats when Tom Hanks boys meet up with the 101st right before the last scene
  • Member since
    July 2003
  • From: Philippines
Posted by Dwight Ta-ala on Thursday, May 13, 2004 3:44 AM
Pete, I believe John is trying to recreate a scene from Saving Private Ryan where the setting is a grassland. I think that he'll put lots of tall grasses to cover the G.I.'s

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.