Enter keywords or a search phrase below:
I was just pondering this same issue on a kit I am decaling now. There has to be a product that works better than micro-sol and micro set. What other products do you guys use for breaking down the decals to make them mold to the panel lines, rivets etc? I am willing to give anything new a try.
Thuens, that is the same issue I had with my Zero. I want to start painting my insignias whenever possible, but I tried on the Kingfisher and it turned out awful. I sanded them off and will be using decals instead. I need to research a better way to spray those on.
Your work is looking good and coming along nicely.
BK
On the bench:
A lot !! And I mean A LOT!!
2024 Kits on deck / in process / completed
14 / 5 / 2
Typical of tamiya decals these were thick and dont seat into the detail well :-(
IMG_20180409_175943 by Theunis van Vuuren, on Flickr
Theuns
Well, we've all had one of those things happen in one way or another. Sorry to hear that it is a total loss. Sounds like some spare parts for the box and on to another kit. You are always welcome to join in if something comes along.
Hey guys,
i had a bad accident with the dornier
last Night as I was cleaning my airbrush I dumped my jar of laquer thinner on my model and ruined it. It ate into the fresh paint and the plastic
pretty much a write Off.
looks like I’ll be bowing out of the build unless I find something else.
jason
if you want permission for a test flight.... the answer is "no".
Got the IJN grey on, shading just about bleeding through.
It is a tad greener than in the pix
IMG_20180407_180032 by Theunis van Vuuren, on Flickr
The rivit detail is a very nice touch. The kit is looking very nice and you are moving along quite quickly too.
The surface detail was a little bland to my taste, even for a simpe quick build
IMG_20180406_190717 by Theunis van Vuuren, on Flickr
So I added rivet detail.
IMG_20180406_190829 by Theunis van Vuuren, on Flickr
IMG_20180407_150245 by Theunis van Vuuren, on Flickr
I've been working on the Kingfisher alot lately trying to get the first one done. I finally settled on a scheme and then it dawned on me that I have to lay a star decal inside of the support struts for the outer floats. OOOOFFF !!! That is gonna be really hard as the decal is larger than the area the struts take up. I thought the paint work was gonna be a pain on this due to the floats but those underwing decals are gonna test me for sure.
Looks good, Thuens. That reminds me of my zero build. Might be the same basic kit for all I know. It went together with no issues as well and it was an old kit also. I'm looking forward to seeing this one build up.
This will be a very simple oit the box build, nothing special.
I added maskingtape belts and gave it all some shadow with a pin wash.
IMG_20180405_153658 by Theunis van Vuuren, on Flickr
IMG_20180405_153741 by Theunis van Vuuren, on Flickr
I also sanded down the raised detail on the float and re-scribed.
IMG_20180405_154005 by Theunis van Vuuren, on Flickr
Sofar the dryfit of major parts is not bad atall for a kit of 1970's era
IMG_20180405_155841 by Theunis van Vuuren, on Flickr
Ta , will post pix a little later
Yes, I'm planning on running this until the end of June at this point. Many of us have things yet to be completed and need the extra time. SO, bring on that Rufe.
Confirm it only colses mid this year?
If so I am in with a 1/48 ancient tamiya Rufe..
That Fisher is coming along nicely BK!
Well, I quit the second job as it just took up too much time. So, now I can work on the kits more. That being said, I've made some great progress on the KF and it is actually starting to resemble one. I call that a win. I only have a few more bits and some priming is in order. With luck I can start paint this weekend.
Well, as usual progress is slow. I have the floats installed and it's starting to look like a Kingfisher. I am currently adding the rear radio equipment and gunners seat. I will turn my attention to putting on the canopy and arials then the rear horizontal stabs.
On the second KF kit I have going I have decided to not fight the resin float again and I will be building that one as a wheeled version; most likely a yellow wing or silver version. I like the idea of having both versions sitting side by side and it will speed the build up tremendously. Well, I'm off for a bit. Thanks for coming along.
I agree. This one turned out super nice given the kit and size, it looks stunning. Simply well done all around. I'll update the front page.
From one Jack to another, have to say that is some rather excellent work on that Kingfisher.
regards,
Jack
Here is my completed 1/72 MPC Kingfisher. As you can see I decided to go with the three color paint scheme. The decals were a bear as expected (old and thick so they curled badly). Once I was done it just looked to clean for me so I added a small amount of weathering and I think all in all she came out looking pretty good for a $5 swap shop find. Thanks again for letting me join in so late and I look forward to watching the thread moving forward!
invertman, looks good. It's coming along nicely.
Jacknewbill, the kingfisher is looking great. It's coming together super fast. AND I love the tri-color paint scheme.
Looking awesome jack! Keep up
the great work!
Here are some progress pics of my Kingfisher. I just need to wrap up the wheels and decals and she's done. I am actually impressed with the quality of the kit while it does lack cockpit detail. The date says its from 1984 so well see how the decals go!
got the wings,sponsons,and tail parts assembled and sanded. getting ready to assemble
and paint the cockpit.
invertmanI’ll post up some pics soon.
Cool !!!
Hey guys, Just about have my 262 done. I’ve been working On the Dornier while decals/ paint dry on the 262 The paint arrived today for the Dornier so now I’m really wanting to get going on it. I’ll post up some pics soon.
Looking forward to seeing some progress pics of your kingfisher Brandon!
Our community is FREE to join. To participate you must either login or register for an account.