Weekend Madness 2021

Some great work here guys, really great to see the standard is as good as ever.

So now it is my turn to take the standard back down.

This year's victim is a 1/48 Testors GeeBee racer, on the inside it says Hawk models 1960. The position of each  decal and the scalloped edges are moulded into the plastic, I am just accepting that's what it is.

10:09 am Dec 29

The one piece wing goes in through the opening once the fuselage halves are together, and thoughtfullt there is loads of space allowed to get it through.

But the fillets on the wing are wider than the slot so I need to space up to 1mm to get it roughly even. Thought that was easier than cuting a mm out of the centre of the wing.

Lunch on the first day:

Thanks for the kind words guys!  I finally got a chance to check in on all the other builds.  Some truly great works here.  I realize that I need to post some better pics. for the cover page.   I too will have some time next week so I'll join ya.  I always try to cover multiple subjects.   I'm thinking it's time for a fast mover.......... Got to see what I have in the heap.

Have a great holiday everyone!

I have been struggling with both bench time and "drive" just lately, but I have time off between Christmas and New Year, so I will be building my kit then.  Whether or not I make the deadline, it will still be my tribute to a good bloke who was taken too soon.

I have been watching the builds here - some magnificent work, and great achievements in the short time-frame, well done everyone.  I shall be joining your ranks soon.

Lots of great builds guys.   I've been following along and enjoying watching them all come together in short order. 

Thanks again Bill for hosting it this year.

I have one other build on my desk for the Lewbud memorial build that I hope to finish before years end.  If I can get that done in short order I might make another attempt at this one.

Have a Merry Christmas everyone!

GMorrison

All- this has been a really nice tribute to Buddy.

I will update the post for finished and unfinished builds, so future searches can see how well this went.

If I didn't get a model stuck together, I did get this band to stick together.

Blessings and prayers to you all and have a safe and happy holiday.

 

Bill

 

Bill-it has been a very nice tribute to Buddy and thank you for organizing and spearheading the GB-I'm already looking forward to next's years Madness. 

Not sure if I'm going to attempt a build this weekend, but either way, I've enjoyed (as always) building something and watching everyone's great builds-always amazes me what you folks can do in 48 hrs.

Either way, I hope you all have a very blessed holiday.

All- this has been a really nice tribute to Buddy.

I will update the post for finished and unfinished builds, so future searches can see how well this went.

If I didn't get a model stuck together, I did get this band to stick together.

Blessings and prayers to you all and have a safe and happy holiday.

Bill

Caveman-very nice build indeed-love the camo scheme-and great idea to add the Hetzer for a size compairson.

Also nice touch (and very thoughtful) on the message on the tank-Lewbud was an important part of this forum.

Caveman that scale comparison really made it come to life. I was looking at your stand and the background thinking it was big but that comp made the size come to life. You're doing Buddy proud with each build!

Rest In Peace, Buddy

Well, this is it.  At least as far as I'm prepared to go anyway.  Just ordered some metal tracks and decals for her.  The kit tracks are dissappointing and the decals are MIA.  I took the splinter camo idea from the German railway colors.  Seemed appropriate for the size of this monster.  Then just added my own script.  I also included a few pics. alongside a Hetzer that I built for weekend madness a few years ago for giggles.

P1012204 by Tim Bowers, on Flickr" target="">P1012204 by Tim Bowers, on Flickr

P1012209 by Tim Bowers, on Flickr

P1012208 by Tim Bowers, on Flickr

P1012206 by Tim Bowers, on Flickr

P1012207 by Tim Bowers, on Flickr

P1012211 by Tim Bowers, on Flickr

P1012210 by Tim Bowers, on Flickr

Anyone read German?

Got to work in a few hours, so that's all from me for tonite. 

Till tomorrow.

Great progress Caveman-ambitious project and I will be following along.

Half time show.  All the construction pretty much done.  Moving to the paint room. 

I have to say, my word is this thing huge!  I know there was only one lower hull actually built and that is probably a good thing.  This kit is longer than a 48 scale jet so I don't know where I'm gonna put it when finished.

P1012197 by Tim Bowers, on Flickr

P1012198 by Tim Bowers, on Flickr

P1012199 by Tim Bowers, on Flickr

P1012201 by Tim Bowers, on Flickr

P1012203 by Tim Bowers, on Flickr

More pics. when I get some paint on her.  Hope I have enough paint...........

Caveman's going for the trifecta!! I'd join you but the wife is having a panic attack about being ready for Christmas and our daughter's 18th birthday...even I know it's in my best interest not to even step into the basement...

I'll be watching your updates for sure tho 

And once more.......

Trumpeter JPE100.  A paper panzer but should be interesting just the same.  Off and running at around midnight Saturday morning.

P1012190 by Tim Bowers, on Flickr" target="">P1012190 by Tim Bowers, on Flickr

P1012191 by Tim Bowers, on Flickr

Hope to update in a few hours.

Anyone else building this weekend?  I intend to start in a few hours.  I have at least one more in mind. 

Caveman

My theory is that the aftermarket wing is providing a ton of downforce and lifting the front end off the ground.

Everything is tight, but would need some surgery to get to a proper ride height.  Or just bash it with some 4X4 parts..................

 

 

lol

Nice work Caveman-love the yellow.

I have found that AMT kits are full of surprises-you're a brave man to tackle one for a Weekend build-and you did a great job to boot!

My theory is that the aftermarket wing is providing a ton of downforce and lifting the front end off the ground.

Everything is tight, but would need some surgery to get to a proper ride height.  Or just bash it with some 4X4 parts..................

Strong finish there caveman! That yellow does pop. It's got a good shine to it. you have to wonder why amt thought it was a 4x4 haha wow they lifted that body. You weren't kidding about the kit bein a modeling challenge that's for sure.

Calling this one done.  A few min. to spare.  Will get better pics. tomorrow.

P1012186 by Tim Bowers, on Flickr" target="">P1012186 by Tim Bowers, on Flickr

P1012188 by Tim Bowers, on Flickr

Till tomorrow.

Hey Guys.

Going through some vicous weather today.  Power is spotty at best so I'm trying to keep my air tanks full and my lanterns charged.  Quite a wild site.  Powerlines popping and flashing all around.  Like a 21 gun salute while I work away!  Not alot to show at the moment with most parts in a dry down stage so I got some pics. while I could.

I LOVE this hobby!  This kit is the reason.  All warped and messed up needing ingenuity, persistance and a little luck to get it to work.  Needed everything short of a blowtorch to get the bumpers on.  First paint show they need a little more clean up, but should work out fine.  Decided to go with a yellow for this one.  Don't know why, but always liked yellow on this body style.

P1012182 by Tim Bowers, on Flickr" target="">P1012182 by Tim Bowers, on Flickr

P1012183 by Tim Bowers, on Flickr

P1012184 by Tim Bowers, on Flickr

P1012185 by Tim Bowers, on Flickr

Got to wonder why AMT decided that the cylinder heads needed to be in 7 parts, or why this particular Mustang didn't have front brakes.   Gotta Love Ebay kits!

If my house doesn't blow away, I should be able to post some more a little later tonite.

Keep at it guys!

Caveman

Sorry guys.  I got sent away for work for two weeks to cover an emergency of sorts.  I can't wait to browse all the projects and I will when I get a few minutes.  But I also can't wait to get going again.  So, a different kind of Mustang this time.......

 

P1012181 by Tim Bowers, on Flickr

P1012180 by Tim Bowers, on Flickr" target="">P1012180 by Tim Bowers, on Flickr

9 PM start.  Hope to post an update in a few hours.

 

 

whatcha thinkin for the color?

taxtp

That worked out very well Mongoose. I wanted to have a little Matchbox style base for my Airfix Stalin tank. I cobbled this together.

Cheers

Tony

 

gotta agree, simple and effective.

Our local club president gave me this kind of advice years ago. It just adds a level of interest for people when you have some element from the natural environment as a backdrop for your model. 

Sorry guys.  I got sent away for work for two weeks to cover an emergency of sorts.  I can't wait to browse all the projects and I will when I get a few minutes.  But I also can't wait to get going again.  So, a different kind of Mustang this time.......

P1012181 by Tim Bowers, on Flickr

P1012180 by Tim Bowers, on Flickr" target="">P1012180 by Tim Bowers, on Flickr

9 PM start.  Hope to post an update in a few hours.

That worked out very well Mongoose. I wanted to have a little Matchbox style base for my Airfix Stalin tank. I cobbled this together.

Cheers

Tony

Ernest-your K-wagen turned out great-love the weathering-very effective....

Mongoose-again, great job on your SU-the base adds a lot, especially with the camo scheme.

Thanks BK! Sure was fun watching these all come together. Some great work for sure.

Here's a final shot of my Su on the completed base. It really shows why they chose this camo scheme for Angola. Pits the whole build into perspective in my mind. 

The Kubelwagen turned out amazing!  Hard to believe that it took you only such a short time.  Your other recent builds also looked outstanding.

TJS

Thank you Brandon-always a fun time participating in the Weekend Madness.

Mongoos, bufflehead, and bobbaily, you 3 did some super nice work. Well done to the 3 of you all around. Im jelly.

BK