P-47 Thunderbolt GB

The front office looks great Geoff, it's good to see someone making some progress on this build.

Cheers

I finally have some progress to report on my build. I have the cockpit done as well as the engine area. Here's a pic, sorry for the poor focus, my camera sucks. Ultracast seat, everything else is from the kit.

gedenke wrote:

Darren, yes, I shipped it off the other day via air mail. I guess you didn't get my reply to your PM. -Geoff

Geoff thanks again and sorry but no I didn't get your reply to the PM.

Darren

darson wrote:

Geoff (gedenke), did you get the PM I sent you the other day with my address details for the P-47 seat? Cheers

Darren, yes, I shipped it off the other day via air mail. I guess you didn't get my reply to your PM.

-Geoff

what Mike said on the Pollyscale Flat, it's excellent.

Geoff (gedenke), did you get the PM I sent you the other day with my address details for the P-47 seat?

Cheers

Jeff Gunn wrote:

repainted, however, one thing leads to another...now i have stripped some of the decals with the masking tape ...aaaaaaaaaaaarrrrrrgggggggggghhhhhhhh....oh well now i know about flat coat...seems to be a stupid name for something you dont put on as a coat, but use as a mixer.

Tamiya Flat Coat is not meant to be used straight like that, thus the results, most likely you will need to strip it and repaint. Tamiya Flat Coat it meant to be mixed with gloss paint to make it flat.

Thanks all for your offers for color help, settled on interior green for the clockpit area with yellow zinc chromate for wheel wells etc., insided cowl was left natural metal due to engine heat, only color I am not sure of is the firewall behind the engine.

helppppppppppp....just had a major drama with using Tamiya Flat Coat... I brushed on a layer of flat coat over a coat of Future....and its completly fogged over...looks almost white? any ideas...not sure what to do. Another Flat coat? andother Future coat? try to clean off with thinner? ...any HELP please !!!!!!!!

gedenke wrote:

Darren, I happen to have just such a seat. PM me with your addy and I'll be happy to help. Tonight I finally start my P-47 build (Spit's finished)!

PM inbound and thanks a bunch for the offer I really appreciate it.

Cheers Darren

darson wrote:

All I am painting up my Tamiya 1/48 P-47 at the moment and I' struck a little snag.  I seem to have somehow lost the pilot’s seat from the sprue.  So does anyone have a spare seat for a Tamiya P-47 that they no longer need that they'd be willing to send to me?  I'd be more than happy to pay for postage and would be extremely grateful, otherwise it looks like an order to Ultracast coming up. Cheers

Darren, I happen to have just such a seat. PM me with your addy and I'll be happy to help.

Tonight I finally start my P-47 build (Spit's finished)!

John same goes for me, I have some really nice color shots of WWII P-47s, just post what you need and I'll see if I've got it.

All I am painting up my Tamiya 1/48 P-47 at the moment and I' struck a little snag.  I seem to have somehow lost the pilot’s seat from the sprue.  So does anyone have a spare seat for a Tamiya P-47 that they no longer need that they'd be willing to send to me?  I'd be more than happy to pay for postage and would be extremely grateful, otherwise it looks like an order to Ultracast coming up.

Cheers

Thanks Darren, I really appreciate it and am of course happy that now I plunge forward...

Leon

Leon I have just looked again at the instructions for my Tamiya P-47 Bubbletop and I realised I made a bit of a mistake.  I was reading the Tamiya callout of AS-7 as Bare Metal Silver not Neutral Gray which is why I thought their cowling colors were up the creek.

As it is a cowling interior of Chromate Yellow and Neutral Grey is just fine, sorry for the confusion. 

Cheers

Wow...those are some great CP photos. Never seen those before. Thanks for the look.

Jerry

darson wrote:

gedenke wrote: While we're on the "proper color" issue, I'm about to start my 1/48 Tamiya Razorback (ultracast seat is in the mail). Are all the colors called out on the Tamiya instruction sheet accurate, or is there anything I should know? I'll be doing a NMF P-47D called "Fightin' Gator". OK I'm going to go out on a limb here and try and answer this one.  In my opinion the color callouts on the Tamiya instructions are alright in some things but just plain wrong in lots of others.  My main complaint is the engine area including the cowling (inside); check your references for some more accurate colors.

Just two days ago I did the inside of the cowling like the instructions say. It's not too late...can you help me...? What would you suggest changing it to?

Thanks for any help.

Leon

gedenke wrote:

While we're on the "proper color" issue, I'm about to start my 1/48 Tamiya Razorback (ultracast seat is in the mail). Are all the colors called out on the Tamiya instruction sheet accurate, or is there anything I should know? I'll be doing a NMF P-47D called "Fightin' Gator".

OK I'm going to go out on a limb here and try and answer this one.  In my opinion the color callouts on the Tamiya instructions are alright in some things but just plain wrong in lots of others.  My main complaint is the engine area including the cowling (inside); check your references for some more accurate colors.

The cockpit detail colors are OK but I prefer using XF-26 Deep Green for P-47 cockpits as I find this makes a good eyeball match for Republic's Dark Dull Green.  Aside from that here are some reference shots of a P-47D-30-RA Bubbletop that was in service at a US Air Force base when it was taken off the line and place in storage for the museum of aviation in Warner Robins, Georgia.  All details in the cockpit as they were when the aircraft was in service.  Note that P-47s built by Republic left the factory with cockpits painted Dull Dark Green rather than Chromate Green as used by Curtis.

Oh and as to the color directly behind the cockpit on the razorback, I think from this shot "Fightin' Gator" should be NM

http://www.winkton.net/pictures/fightin%20gator%202_72.jpg

Cheers

Jeff, Your build is looking good.

Darren, I've also seem what Tom has. Now as for the color under the window just aft the cockpit on a razorback...that seems to be argued to no end.

Leon

Jeff that looks fantastic, you know no matter how many aircraft I build it still never ceases to be amaze me what a transformation decals can make to a kit.  Looking forward to some more progress pics.

All, I have a question that's been bugging me since I had a look at Mike V's completed build.  In a P-47D Bubbletop what color should the area directly behind the pilots armored headrest be?  Should it be the same color as the cockpit or should it be the same color as exterior color that surrounds it?  My thinking at this stage is to go with the exterior color, but any thoughts would be appreciated.

As to my progress, well things have been a little slow due to that fact that I've been a bit off color for the last couple of days.  About the only progress I have made is to gloss coat the cockpit in preparation for a wash.

Cheers